{"id":8505,"date":"2021-03-27T02:46:08","date_gmt":"2021-03-27T02:46:08","guid":{"rendered":"http:\/\/ixox.net\/?post_type=product&p=8505"},"modified":"2024-07-11T09:16:58","modified_gmt":"2024-07-11T02:16:58","slug":"horizontal-machining-centers-space-center-ma-h%e2%85%b1-series","status":"publish","type":"product","link":"https:\/\/ixox.net\/horizontal-machining-centers-space-center-ma-h%e2%85%b1-series\/","title":{"rendered":"Horizontal Machining Centers SPACE CENTER MA-H\u2161 series"},"content":{"rendered":"

\"Trung<\/p>\n

Machine structure for high speed feed and high rigidity<\/strong><\/span><\/h2>\n
    \n
  • Highly rigid 3-point supported bed
    \nEasy installation thanks to bed that does not twist.
    \nSupporting stable, high accuracy over a long period.<\/li>\n
  • Ball screw bracket
    \nThe ball screw brackets at both ends of the X-Y-Z axes are reinforced and combined for highly accurate drive and positioning.<\/li>\n
  • Ball screw cooling
    \nX-Z axis ball screw cooling and Y-axis motor bracket cooling are standard. Assuring stable accuracy during high rates of operation.<\/li>\n
  • Indexing table, pallet
    \nIndexing table uses curvic coupling for high-accuracy indexing.
    \nStd: 1 degree<\/strong>
    \nOpt: NC 0.001\u00b0<\/strong>
    \nPallet seating surface uses a taper cone system for high accuracy positioning and high durability.<\/li>\n<\/ul>\n

    \"Trung<\/p>\n

    High-speed operation that reduces non-cutting time<\/strong><\/span><\/h2>\n
      \n
    • Rapid traverse: 60 m\/min (X-Y-Z axes)<\/li>\n
    • Rapid acceleration: 0.7G (maximum)<\/li>\n
    • Tool change: 2.0 sec (T-T) \/ 4.4 sec (C-C)<\/li>\n
    • Table indexing:
      \n2.0 sec (MA-600H\u2161 1 degree indexing 90 degrees)
      \n2.5 sec (MA-600H\u2161 0.001 degree indexing 90 degrees)<\/li>\n
    • APC time: 12 sec (MA-600H\u2161)<\/li>\n<\/ul>\n

      Ideal performance levels from a variety of spindles for a wide range of applications<\/strong><\/span><\/h2>\n

      Highly efficient production with high machining capacity<\/strong><\/span><\/h3>\n

      \"Trung<\/p>\n

      Machining capacity:<\/strong><\/span><\/h3>\n

      901cm3<\/sup>\/min<\/strong> (MA-500H\u2161 actual data*1)
      \nStandard spindle: 6,000 min-1<\/sup> \u00f8100 face mill Material: S45C<\/p>\n\n\n\n\n\n\n\n
      Tool<\/span><\/strong><\/td>\nSpindle speed<\/span><\/strong>
      \nmin-1<\/sup><\/span><\/strong><\/td>\n
      Cutting<\/span><\/strong>
      \nm\/min<\/span><\/strong><\/td>\n
      Feedrate<\/span><\/strong>
      \nmm\/min<\/span><\/strong><\/td>\n
      Cut width<\/span><\/strong>
      \nmm<\/span><\/strong><\/td>\n
      Cut depth<\/span><\/strong>
      \nmm<\/span><\/strong><\/td>\n
      Chips<\/span><\/strong>
      \ncm3<\/sup>\/min<\/span><\/strong><\/td>\n<\/tr>\n
      \u00f8100 face mill 10 blades (carbide)<\/span><\/td>\n955<\/span><\/td>\n300<\/span><\/td>\n3,220<\/span><\/td>\n70<\/span><\/td>\n4<\/span><\/td>\n901<\/span><\/td>\n<\/tr>\n
      \u00f850 porcupine cutter (carbide)<\/span><\/td>\n1,146<\/span><\/td>\n180<\/span><\/td>\n500<\/span><\/td>\n25<\/span><\/td>\n50<\/span><\/td>\n625<\/span><\/td>\n<\/tr>\n
      \u00f863 insert drill (carbide)<\/span><\/td>\n606<\/span><\/td>\n120<\/span><\/td>\n121<\/span><\/td>\n–<\/span><\/td>\n–<\/span><\/td>\n–<\/span><\/td>\n<\/tr>\n
      M42 P4.5 tap<\/span><\/td>\n91<\/span><\/td>\n12<\/span><\/td>\n409.5<\/span><\/td>\n–<\/span><\/td>\n–<\/span><\/td>\n81%*<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      * Spindle load<\/em><\/span><\/p>\n

      802cm3<\/sup>\/min<\/strong> (MA-600H\u2161 actual data*1)
      \nWide-range spindle: 12,000 min-1<\/sup> \u00f8100 face mill Material: S45C<\/p>\n\n\n\n\n\n\n\n
      Tool<\/span><\/strong><\/td>\nSpindle speed<\/span><\/strong>
      \nmin-1<\/sup><\/span><\/strong><\/td>\n
      Cutting<\/span><\/strong>
      \nm\/min<\/span><\/strong><\/td>\n
      Feedrate<\/span><\/strong>
      \nmm\/min<\/span><\/strong><\/td>\n
      Cut width<\/span><\/strong>
      \nmm<\/span><\/strong><\/td>\n
      Cut depth<\/span><\/strong>
      \nmm<\/span><\/strong><\/td>\n
      Chips<\/span><\/strong>
      \ncm3<\/sup>\/min<\/span><\/strong><\/td>\n<\/tr>\n
      \u00f8100 face mill 10 blades (carbide)<\/span><\/td>\n955<\/span><\/td>\n300<\/span><\/td>\n2,865<\/span><\/td>\n70<\/span><\/td>\n4<\/span><\/td>\n802<\/span><\/td>\n<\/tr>\n
      \u00f850 porcupine cutter (carbide)<\/span><\/td>\n1,146<\/span><\/td>\n180<\/span><\/td>\n400<\/span><\/td>\n25<\/span><\/td>\n50<\/span><\/td>\n500<\/span><\/td>\n<\/tr>\n
      \u00f863 insert drill (carbide)<\/span><\/td>\n606<\/span><\/td>\n120<\/span><\/td>\n91<\/span><\/td>\n–<\/span><\/td>\n–<\/span><\/td>\n–<\/span><\/td>\n<\/tr>\n
      M42 P4.5 tap<\/span><\/td>\n91<\/span><\/td>\n12<\/span><\/td>\n409.5<\/span><\/td>\n–<\/span><\/td>\n–<\/span><\/td>\n–<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      1,081cm3<\/sup>\/min<\/strong> (MA-600H\u2161 actual data*1)
      \nSuper-heavy spindle: 6,000 min-1<\/sup> (Optional) \u00f8200 face mill Material: S45C<\/p>\n\n\n\n\n
      Tool<\/strong><\/td>\nSpindle speed<\/strong>
      \nmin-1<\/sup><\/strong><\/td>\n
      Cutting<\/strong>
      \nm\/min<\/strong><\/td>\n
      Feedrate<\/strong>
      \nmm\/min<\/strong><\/td>\n
      Cut width<\/strong>
      \nmm<\/strong><\/td>\n
      Cut depth<\/strong>
      \nmm<\/strong><\/td>\n
      Chips<\/strong>
      \ncm3<\/sup>\/min<\/strong><\/td>\n<\/tr>\n
      \u00f8200 face mill 10 blades (cermet)<\/td>\n330<\/td>\n207<\/td>\n1,404<\/td>\n140<\/td>\n5.5<\/td>\n1,081<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      *1 D\u1eef li\u1ec7u \u0111\u01b0\u1ee3c \u0111\u0103ng \u1edf tr\u00ean l\u00e0 gi\u00e1 tr\u1ecb hi\u1ec7u su\u1ea5t th\u1ef1c t\u1ebf. Do s\u1ef1 kh\u00e1c bi\u1ec7t v\u1ec1 th\u00f4ng s\u1ed1 k\u1ef9 thu\u1eadt, c\u00f4ng c\u1ee5, \u0111i\u1ec1u ki\u1ec7n x\u1eed l\u00fd, v.v., d\u1eef li\u1ec7u thu \u0111\u01b0\u1ee3c c\u00f3 th\u1ec3 kh\u00e1c v\u1edbi d\u1eef li\u1ec7u \u0111\u00e3 \u0111\u0103ng.<\/em><\/span><\/p>\n

      Outstanding dimensional stability with long-run machining of large workpieces<\/strong><\/span><\/h2>\n

      Manageable Deformation\u2014Accurately Controlled<\/strong><\/span>
      \nThermo-Friendly Concept<\/strong><\/span><\/h3>\n

      Dimensional changes of less than 8\u03bcm over time in a wide machining range (actual data with room temperature change of 8\u00b0C [TAS-C applicable])<\/p>\n

      In addition to maintaining high dimensional accuracy when room temperature changes, Okuma’s Thermo-Friendly Concept provides high dimensional accuracy during machine startup and machining restart.
      \nTo stabilize thermal deformation, warming-up time is shortened and the burden of dimensional correction during machining restart is reduced.<\/p>\n

      Machine Specifications:<\/strong><\/span><\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Item<\/span><\/strong><\/td>\nUnit<\/span><\/strong><\/td>\nMA-500H\u2161<\/span><\/strong><\/td>\nMA-600H\u2161<\/span><\/strong><\/td>\n<\/tr>\n
      No. 50<\/span><\/td>\nNo. 40*1<\/sup><\/span><\/td>\nNo. 50<\/span><\/td>\nNo. 40*1<\/sup><\/span><\/td>\n<\/tr>\n
      Travels<\/span><\/strong><\/td>\nX-axis travel<\/span>
      \n(column left\/right)<\/span><\/td>\n
      mm (in.)<\/span><\/td>\n700 (27.56)<\/span><\/td>\n1,000 (39.37)<\/span><\/td>\n<\/tr>\n
      Y-axis travel<\/span>
      \n(spindle up\/down)<\/span><\/td>\n
      mm (in.)<\/span><\/td>\n900 (35.43)<\/span><\/td>\n<\/tr>\n
      Z-axis travel<\/span>
      \n(table front\/back)<\/span><\/td>\n
      mm (in.)<\/span><\/td>\n780 (30.71)<\/span><\/td>\n1,000 (39.37)<\/span><\/td>\n<\/tr>\n
      Spindle center to pallet top<\/span><\/td>\nmm (in.)<\/span><\/td>\n50 to 950 (1.97 to 37.40)<\/span><\/td>\n<\/tr>\n
      Spindle nose to pallet center<\/span><\/td>\nmm (in.)<\/span><\/td>\n70 to 850 (2.76 to 33.46)<\/span><\/td>\n70 to 1,070 (2.76 to 42.13)<\/span><\/td>\n<\/tr>\n
      Pallet<\/span><\/strong><\/td>\nWork area<\/span><\/td>\nmm (in.)<\/span><\/td>\n500 \u00d7 500 (19.69 \u00d7 19.69)<\/span><\/td>\n630 \u00d7 630 (24.80 \u00d7 24.80)<\/span><\/td>\n<\/tr>\n
      Max load capacity<\/span><\/td>\nkg (lb)<\/span><\/td>\n800 [1,000] (1,760 [2,200])<\/span><\/td>\n1,200 [1,400] (2,640 [3,080])<\/span><\/td>\n<\/tr>\n
      Indexing angle<\/span><\/td>\ndeg<\/span><\/td>\n1 [0.001]<\/span><\/td>\n<\/tr>\n
      Max workpiece dimensions<\/span><\/td>\nmm (in.)<\/span><\/td>\n\u00f8800 \u00d7 1,000 (\u00f831.50 \u00d7 39.37)<\/span><\/td>\n\u00f81,000 \u00d7 1,000 (\u00f839.37 \u00d7 39.37)<\/span><\/td>\n<\/tr>\n
      Spindle<\/span><\/strong><\/td>\nSpindle speed<\/span><\/td>\nmin-1<\/sup><\/span><\/td>\n50 to 6,000[50 to 6,000(Super-heavyspindle), 50 to12,000]<\/span><\/td>\n50 to 15,000, 50 to 20,000<\/span><\/td>\n50 to 6,000[50 to 6,000,(Super-heavyspindle), 50 to12,000, 20,000]<\/span><\/td>\n50 to 15,000, 50 to 20,000<\/span><\/td>\n<\/tr>\n
      Tapered bore<\/span><\/td>\n<\/td>\n7\/24 taper No. 50[HSK-A100]<\/span><\/td>\n7\/24 taper No. 40, HSK-A63*2<\/sup><\/span><\/td>\n7\/24 taper No. 50[HSK-A100]*3<\/sup><\/span><\/td>\n7\/24 taper No. 40, HSK-A63*2<\/sup><\/span><\/td>\n<\/tr>\n
      Bearing dia<\/span><\/td>\nmm (in.)<\/span><\/td>\n\u00f8100 (\u00f83.94)<\/span><\/td>\n\u00f870 (\u00f82.76)<\/span><\/td>\n\u00f8100 (\u00f83.94)<\/span><\/td>\n\u00f870 (\u00f82.76)<\/span><\/td>\n<\/tr>\n
      Feedrate<\/span><\/strong><\/td>\nRapid traverse<\/span><\/td>\nm\/min (ipm)<\/span><\/td>\nX-Y-Z: 60 (2,362)<\/span><\/td>\n<\/tr>\n
      Cutting feed<\/span><\/td>\nmm\/min (ipm)<\/span><\/td>\nX-Y-Z: 1 to 60,000 (0.04 to 2,362)<\/span><\/td>\n<\/tr>\n
      Motors<\/span><\/strong><\/td>\nSpindle (10 min\/cont)\u00a0*4<\/sup><\/span><\/td>\nkW (hp)<\/span><\/td>\n30\/22[45\/37*4<\/sup>, 37\/26](40\/30[60\/50, 50\/35])<\/span><\/td>\n26\/18.5, 30\/22(35\/25, 40\/30)<\/span><\/td>\n30\/22 [45\/37*4<\/sup>,37\/26, 55\/50*5](40\/30 [60\/50,50\/35, 75\/66])<\/span><\/td>\n26\/18.5, 30\/22(35\/25, 40\/30)<\/span><\/td>\n<\/tr>\n
      Feed axis motors<\/span><\/td>\nkW (hp)<\/span><\/td>\nX: 4.6 (6.13), Y: 4.6 (6.13) \u00d7 2, Z: 4.6 (6.13)<\/span><\/td>\nX: 4.6 (6.13), Y: 4.6 (6.13) \u00d7 2, Z: 5.2 (6.93)<\/span><\/td>\n<\/tr>\n
      Table indexing<\/span><\/td>\nkW (hp)<\/span><\/td>\n3.5 (4.67)<\/span><\/td>\n<\/tr>\n
      ATC<\/span><\/strong><\/td>\nTool shank<\/span><\/td>\n<\/td>\nMAS403 BT50[HSK-A100]<\/span><\/td>\nMAS 403 BT40, HSK-A63*2<\/sup><\/span><\/td>\nMAS403 BT50[HSK-A100]*3<\/sup><\/span><\/td>\nMAS 403 BT40, HSK-A63*2<\/span><\/td>\n<\/tr>\n
      Pull stud<\/span><\/td>\n<\/td>\nMAS-2 [\u2013]<\/span><\/td>\n<\/tr>\n
      Magazine capacity<\/span><\/td>\ntools<\/span><\/td>\n40 [60, 81, 111, 141, 171, 195, 225, 255, 285, 320, 400]<\/span><\/td>\n<\/tr>\n
      Max tool dia<\/span>
      \n(w\/ adjacent)\u00a0*6<\/sup><\/span><\/td>\n
      mm (in.)<\/span><\/td>\n\u00f8140 (5.51)<\/span><\/td>\n\u00f8100 (3.94)<\/span><\/td>\n\u00f8140 (5.51)<\/span><\/td>\n\u00f8100 (3.94)<\/span><\/td>\n<\/tr>\n
      Max tool dia<\/span>
      \n(w\/o adjacent)\u00a0*6<\/sup><\/span><\/td>\n
      mm (in.)<\/span><\/td>\n\u00f8240 (9.45)<\/span><\/td>\n\u00f8150 (5.91)<\/span><\/td>\n\u00f8240 (9.45)*7<\/sup><\/span><\/td>\n\u00f8150 (5.91)<\/span><\/td>\n<\/tr>\n
      Max tool length<\/span><\/td>\nmm (in.)<\/span><\/td>\n450 (17.72)<\/span><\/td>\n450 (17.72)<\/span><\/td>\n450 [600] (17.72 [23.62])<\/span><\/td>\n450 (17.72)<\/span><\/td>\n<\/tr>\n
      Max tool weight<\/span><\/td>\nkg (lb)<\/span><\/td>\n25 (55)<\/span><\/td>\n10 (22)<\/span><\/td>\n25 (55)<\/span><\/td>\n10 (22)<\/span><\/td>\n<\/tr>\n
      Tool selection<\/span><\/td>\n<\/td>\nMemory random (Fixed with 81 or more tools)<\/span><\/td>\n<\/tr>\n
      Machine size<\/span><\/strong><\/td>\nHeight<\/span><\/td>\nmm (in.)<\/span><\/td>\n3,174 (124.96)<\/span><\/td>\n<\/tr>\n
      Floor space; width x depth<\/span><\/td>\nmm (in.)<\/span><\/td>\n3,110 \u00d7 5,971 (122.44 \u00d7 235.08)<\/span><\/td>\n3,410 \u00d7 6,495 (134.25 \u00d7 255.71)<\/span><\/td>\n<\/tr>\n
      Weight<\/span><\/td>\nkg (lb)<\/span><\/td>\n21,500 (47,300)<\/span><\/td>\n24,500 (53,900)<\/span><\/td>\n<\/tr>\n
      Controller<\/span><\/strong><\/td>\n<\/td>\nOSP-P300MA<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      [ ]: Optional<\/em><\/span><\/p>\n

      *1. No. 40 spindle is optional.<\/em><\/span><\/p>\n

      *2. 20,000 min-1<\/sup>\u00a0with HSK-A63 only<\/em><\/span><\/p>\n

      *3. 20,000 min-1<\/sup>\u00a0with HSK-A100 only<\/em><\/span><\/p>\n

      *4. Super-heavy spindle motor rating is 20 min\/cont (for heavy-duty cutting)<\/em><\/span><\/p>\n

      *5. 20,000 min-1<\/sup>\u00a0spindle motor rating is 30 min\/cont<\/em><\/span><\/p>\n

      *6. Values differ with a matrix magazine. Please inquire.<\/em><\/span><\/p>\n

      *7. With MA-600H\u2161 20,000 min-1<\/sup>, the maximum tool diameter is limited depending on the spindle speed used.<\/em><\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

        \n
      • Manufacturer: OKUMA<\/li>\n
      • Model: MA-500H\u2161, MA-600H\u2161<\/li>\n<\/ul>\n

        Machine structure for high speed feed and high rigidity. Outstanding dimensional stability with long-run machining of large workpieces. Ideal performance levels from a variety of spindles for a wide range of applications.<\/p>\n","protected":false},"featured_media":4801,"comment_status":"open","ping_status":"closed","template":"","meta":[],"lang":"en","translations":{"en":8505,"vi":4797,"zh":9662,"ja":10438},"pll_sync_post":[],"_links":{"self":[{"href":"https:\/\/ixox.net\/wp-json\/wp\/v2\/product\/8505"}],"collection":[{"href":"https:\/\/ixox.net\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/ixox.net\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/ixox.net\/wp-json\/wp\/v2\/comments?post=8505"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ixox.net\/wp-json\/wp\/v2\/media\/4801"}],"wp:attachment":[{"href":"https:\/\/ixox.net\/wp-json\/wp\/v2\/media?parent=8505"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}