Surface Roughness Tester – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Mon, 29 Mar 2021 07:39:05 +0000

Compact type all-in-one surface roughness tester has evolved by meeting customerr demands.

The color LCD can display not only calculation results and measurement conditions, but also surface roughness waveforms. In addition, bigger character size contributes to visibility.
Built-in rechargeable battery allows measurement without a mains power supply connection.

VIDEO:

Specifications:

Model No.			Standard drive unit		Retractable drive unit		Transverse tracing drive unit
			SJ-210 (0.75 mN type)	SJ-210 (4 mN type)	SJ-210 (0.75 mN type)	SJ-210 (4 mN type)	SJ-210 (0.75 mN type)	SJ-210 (4 mN type)
Order No.		mm	178-560-11	178-560-12	178-562-11	178-562-12	178-564-11	178-564-12
		inch/mm	178-561-11	178-561-12	178-563-11	178-563-12	178-565-11	178-565-12
Measuring range	X axis		16.0 mm				5.6 mm
	Detector	Range	360 µm (-200 µm to +160 µm)
		Range/Resolution	360 µm/0.02 µm, 100 µm/0.006 µm, 25 µm/0.002 µm
Measuring force/Stylus tip shape			Depends on the Order No.: 0.75 mN/2 µmR 60° (when the Order No. ends with “-11”) 4 mN/5 µmR 90° (when the Order No. ends with “-12”)
Applicable standards			JIS 1982/JIS 1994/JIS 2001/ISO 1997/ANSI/VDA
Assessed profile			Primary profile, Roughness profile, DF profile, Roughness motif profile

Surface Roughness Tester – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Mon, 29 Mar 2021 07:35:31 +0000

Dramatic improvement on compact type surface roughness testers.

Equipped with a large, touch-screen color graphic LCD to achieve both intuitive operation and high operability.
Skidded and skidless measurement are switchable to perform optium evaluation according to the measurement setup.
A wide-range, high-resolution detector and a very accurate drive unit provide superior high-accuracy measurement in its class.
Detector: Measuring range: 800 µm. Resolution: 0.0001 µm (when the measuring range is 8 µm)
Simplified contour analysis (Step, Step quantity, Area, Coordinate difference) is available using the point cloud data collected to evaluate the surface roughness.

VIDEO:

Specifications:

Model No.		SJ-411		SJ-412
Order No.	mm	178-580-11	178-580-12	178-582-11	178-582-12
	inch/mm	178-581-11	178-581-12	178-583-11	178-583-12
Measuring range	X axis	25 mm		50 mm
	Z axis (detector)	800 µm, 80 µm, 8 µm Up to 2,400 µm when using an optional stylus.
Detector	Detection method	Differential inductance
	Resolution	0.01 µm (800 µm range), 0.001 µm (80 µm range), 0.0001 µm (8 µm range)
	Stylus tip shape (Angle/Radius)	60°/2 µm	90°/5 µm	60°/2 µm	90°/5 µm
	Measuring force	0.75 mN	4 mN	0.75 mN	4 mN
	Radius of skid curvature	40 mm
	Measuring methods	Skidless/Skidded (switchable)
Drive unit (X axis	Measuring speed	0.05, 0.1, 0.2, 0.5, 1.0 mm/s
	Drive speed	0.5, 1, 2, 5 mm/s
	Straightness	0.3 µm/25 mm		0.5 µm/50 mm
Up/down inclination unit	Vertical trave	10 mm
	Inclination adjustment angle	±1.5°
Applicable standards		JIS 1982/JIS 1994/JIS 2001/ISO 1997/ANSI/VDA

Surface Roughness Tester – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Mon, 29 Mar 2021 07:21:30 +0000

Equipped with a 7.5 inch, color TFT LCD, large color icons and touch panel controls, the display unit is easy to read and simple to operate.
A built-in joystick on the control unit allows quick and easy positioning. The manual adjustment knob allows fine positioning of a small stylus for measuring small holes.
In addition to the roughness parameters compliant with ISO/JIS/ANSI/VDA surface roughness standards, contour analysis is also available.

Specifications:

Model No.		SJ-500	*SV-2100M4^1**	*SV-2100S4^1**	*SV-2100H4^1**	*SV-2100W4^1**
Stand type		(Optional)^*2	Manual stand	Motorized stand
Measuring range	Z1 axis (detector)	800 µm, 80 µm, 8 µm
	X axis	50 mm	100 mm
Resolution	X axis	0.05 µm
	Z1 axis (detector	0.01 µm (800 µm), 0.001 µm (80 µm), 0.0001 µm (8 µm)
	Z2 axis (column)	�?/span>	�?/span>	1 µm
Assessed profile		Primary profile, Roughness profile, Waviness profile, DF profile, Roughness motif profile, Waviness motif profile

*1 While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.
*2 Stand for SJ-500 is optional.

Surface Roughness Tester – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Mon, 29 Mar 2021 07:04:06 +0000

Advanced handheld tester that is easy to operate and meets a variety of needs.

Equipped with a large, touch-screen color graphic LCD for intuitive operation and excellent ease of use.
High-speed thermal printer (whose printing speed is approx. 1.5 times that of conventional models) is provided as standard. Allows landscape mode printing to match the display on the LCD.

Specifications:

Surface Roughness Tester – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Mon, 29 Mar 2021 07:00:30 +0000

The X1, Y and Z2 axes have a maximum drive speed of 200 mm/s. This permits high-speed positioning that can potentially result in a large increase in the throughput of multiple-profile/multiple-workpiece measurement tasks.
Capable of inclined plane measurement through 2 axis simultaneous control in X and Y.
For models equipped with the α axis, it is possible to perform continuous measurement over horizontal and inclined surfaces by power-tilting the drive unit.
It is possible to expand the measuring range for multiple workpieces through positioning in Y.
All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.
Since the Z1-axis detector incorporates an anti-collision safety devide, the detector unit will automatically stop if it touches a workpiece or fixture.
Surftest Extreme SV-M3000CNC (CNC Surface Roughness Tester with a movable Y-axis table) that handles measurement of large/heavy workpieces, such as engine blocks or crankshafts, is also available.
Optional external control function (Ext I/O) through bidirectional communication (RS-232C) with the PLC (programmable logic controller) is available.

Specifications:

SV-3000CNC

SV-M3000CNC

Surface Roughness Tester – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Mon, 29 Mar 2021 06:53:48 +0000

FORMTRACER Avant S3000 series are highly functional and user-friendly surface roughness measuring systems with innovative design features.

Often a special method of workholding, such as a custom jig, is required to measure an inclined workpiece surface but this is not needed if you select from the FORMTRACER Avant S3000 series since some models have an inclining drive unit to handle this situation. This feature makes approaching the target surface and measurement of a large workpiece much easier.

The new style remote box has been developed in pursuit of operational usability. An overdrive knob controls the drive speed in real time and is very convenient when fine positioning is required. Another new feature is a part program key that strongly supports creation of measurement part programs, including a move command for manual operation and a measurement start command.

High throughput is achieved thanks to high drive speed (X axis: Max. 80 mm/s, Z2 axix: Max. 30 mm/s) and acceleration (X axis: 30 mm/s2).
All connecting cables are contained within the measuring instrument to eliminate any inconveniece during measurement.
Since the Z-axis detector incorporates an anti-collision safery device, the detector unit will automatically stop if it touches a workpiece or fixture.
A variety of detector holders (optional) are available.
A detector for measuring contours can be retrofitted.

VIDEO:

Specifications:

Model No.		FTA-S4S3000	FTA-H4S3000	FTA-W4S3000	FTA-L4S3000	FTA-S8S3000	FTA-H8S3000	FTA-W8S3000	FTA-L8S3000
Measuring range	X axis	100 mm				200 mm
	Z1 axis	800 µm, 80 µm, 8 µm
Straightness (when the X axis is horizontal)		(0.05+0.001L) µm L = Measurement Length (mm)				(0.1+0.002L) µm L = Measurement Length (mm)
X-axis inclination angle		±45° (Only for models with X-axis inclining drive unit)
Z2-axis (column) travel range		300 mm	500 mm		700 mm	300 mm	500 mm		700 mm
Base size (W×D)		60×450 mm		1000×450 mm		60×450 mm		1000×450 mm
Base material		Granite

Surface Roughness Tester – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Mon, 29 Mar 2021 06:42:00 +0000

Often a special method of workholding, such as a custom jig, is required to measure an inclined workpiece surface but this is not needed if you select a model from the FORMTRACER Avant C3000/4000 series since these have an inclining drive unit to handle this situation. This feature makes approaching the target surface and measurement of a large workpiece much easier.

High throughput is achieved thanks to high drive speed (X axis: MAX. 80 mm/s, Z2 axis: MAX. 30 mm/s) and acceleration (X axis: 30 mm/s2).
All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.
Since the Z1-axis detector incorporates an anti-collision safety device, the detector unit will automatically stop if it touches a workpiece or fixture.
A detector for measuring contours can be retrofitted.
The arm of the detector for contour measurement has a magnetic one-touch detachable mechanism that improves usability.
C4000 type is a highly functional contour measuring system that has a digital detector (measuring range: 60 mm, resolution: 0.02 µm) that enables a Wide range measurement, top/bottom plane continuous measurement function, automatic variable measuring force funtion and stylus drop detection function.

Specifications:

VIDEO:

Surface Roughness Tester – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Mon, 29 Mar 2021 06:25:46 +0000

FORMTRACER Avant D3000/4000 series are highly functional and user-friendly surface roughness and contour measuring systems with innovative design features. Both surface roughness measurement and contour measurement are available on a single system just by replacing the detector.

A detector can be replaced easily without turning off the power and without needing a tool just by using the thumb-turn clamp lever, and the new contour/roughness detector is automatically recognized. This quick changeover minimises downtime and improves useability by removing concerns about detector switch and about damage to the detector from the malfunction.

Often a special method of workholding, such as a custom jig, is required to measure an inclined workpiece surface but this is not needed if you select a model from the FORMTRACER Avant D3000/4000 series since these have an inclining drive unit to handle this situation. This feature makes approaching the target surface and measurement of a large workpiece much easier.

High throughput is achieved thanks to high drive speed (X axis: Max. 80 mm/s, Z2 axis: Max. 30 mm/s) and acceleration (X asxis: 30 mm/s2).

Specifications:

Surface Roughness Tester – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Mon, 29 Mar 2021 06:08:49 +0000

Large sized base models and high-column models are newly added to the line-up.
Equipped with a wide range and high resolution Z1-axis detector.
Often a special method of workholding, such as a custom jip, is required to measure an inclined workpiece surface but this is not needed if you select a model from the CS-3300 series since these have an inclining drive unit to handle this situation. This feature makes approaching the target surface and measurement of a large workpiece much easier.
High throughput is achieved thanks to high drive speed (X axis: Max. 80 mm/s, Z2 axis: Max. 30 mm/s2).
All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.
Since the Z1-axis detector incorporates an anti-collision safety device, the detector unit will automatically stop if it touches a workpiece or fixture.

Specifications:

Model No		CS-3300S4	CS-3300H4	CS-3300W4	CS-3300L4	CS-3300S8	CS-3300H8	CS-3300W8	CS-3300L8
Measuring range	X axis	100 mm				200 mm
	Z1 axis	5 mm (±2.5 mm in horizontal situation)
Straightness (when the X axis is horizontal)		0.2 µm/100 mm				0.8 µm/200 mm
Accuracy (20 °C)	X axis	±(0.8+0.01L) µm L = Measurement Length (mm)				(0.8+0.015L) µm L = Measurement Length (mm)
	Z1 axis (detector unit)	±(1.5+\|2H\|/100) µm H = Measurement height from the horizontal position (mm)
Detector (Z1 axis)	Detection method	Differential inductance
	Measuring force	0.75 mN
	(Stylus tip) Standard	Tip radius 2 µm, Tip angle 60°, Diamond (surface roughness/contour)
	Stylus tip) Cone	Tip radius 25 µm, Tip angle 30°, Sapphire (contour)
	Stylus up/down	Available (stoppable at mid-stroke if required)
X-axis inclination angle		±45°
Z2-axis (column) travel range		300 mm	500 mm		700 mm	300 mm	500 mm		700 mm
Base size (W×D)		600×450 mm		1000×450 mm		600×450 mm		1000×450 mm
Base material		Granite