- Slim design avoids interference with the side wall and draft of the mold.
- Clamping Range:ø4 – ø20
- New ø4 model available. It achieves precise machining with a smaller diameter minimizing the interferences.
- NEW Jet-through Type: Ideal solution for ball-nosed endmills without a hole through for coolant.
A Type (DIN 69893-1) (ISO 12164)
| Model | Fig. | Clamping diameter ød | øD | øD1 | L | L1 | H | E | Weight (kg) |
| HSK-A63-SRC6S-120 | 1 | 6 | 10 | 19 | 120 | 81 | (98) | 26 | 0.9 |
| HSK-A63-SRC6S-165 | 23 | 165 | 121 | (143) | 1.0 | ||||
| HSK-A63-SRC8S-120 | 2 | 8 | 13 | 22 | 120 | 81 | (98) | 1.0 | |
| HSK-A63-SRC8S-165 | 26 | 165 | 123 | (143) | 1.1 | ||||
| HSK-A63-SRC10S-120 | 10 | 16 | 25 | 120 | 81 | 62 | 32 | 1.0 | |
| HSK-A63-SRC10S-165 | 29 | 165 | 123 | 1.2 | |||||
| HSK-A63-SRC12S-120 | 12 | 19 | 28 | 120 | 81 | 72 | 36 | 1.0 | |
| HSK-A63-SRC12S-165 | 32 | 165 | 125 | 1.3 |
A Type (DIN 69893-1) (ISO 12164)
| Model | Fig. | Clamping diameter ød | øD | øD1 | L | L1 | H | E | Weight (kg) |
| HSK-A63-SRC4-90 | 1 | 4 | 10 | 15 | 90 | 46 | (68) | 16 | 0.9 |
| HSK-A63-SRC6-90 | 6 | 14 | 20 | 51 | (68) | 26 | 0.9 | ||
| HSK-A63-SRC6-150 | 2 | 26 | 150 | 108 | (128) | 1.1 | |||
| HSK-A63-SRC8-90 | 8 | 18 | 24 | 90 | 51 | (68) | 1.0 | ||
| HSK-A63-SRC8-150 | 30 | 150 | 110 | (128) | 1.2 | ||||
| HSK-A63-SRC10-90 | 10 | 22 | 28 | 90 | 51 | 62 | 32 | 1.0 | |
| HSK-A63-SRC10-150 | 34 | 150 | 111 | 1.3 | |||||
| HSK-A63-SRC12-90 | 12 | 24 | 30 | 90 | 51 | 65 | 36 | 1.0 | |
| HSK-A63-SRC12-150 | 36 | 150 | 112 | 72 | 1.4 | ||||
| HSK-A63-SRC16-90 | 16 | 28 | 34 | 90 | 51 | 65 | 38 | 1.1 | |
| HSK-A63-SRC16-165 | 41 | 165 | 119 | 80 | 1.8 | ||||
| HSK-A63-SRC20-90 | 20 | 34 | 40 | 90 | 53 | 65 | 42 | 1.2 | |
| HSK-A63-SRC20-165 | 47 | 165 | 122 | 100 | 1.9 |
