Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm. All types come with limit markers and a bezel clamp as standard.
- The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and remove without tools.
- Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
- The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
- A carbide contact point is used.
- The grand gear is made of stainless steel with high resistance to wear and deformation.
- Application of a hard coating on the surface of the crystal makes the gage highly scratch-and chemical-resistant.
Specifications:
Metric |
||||||||||
Order No. | Graduation (mm) | Range (range/rev) (mm) | Accuracy (µm) | Repeat-ability (µm) | Dial reading | Measuring force (N) | ||||
w/lug | Flat-back | Measuring range | Retrace | 1/10 Rev | 1 Rev | |||||
2046S | 2046SB | 0.01 | 10 (1) | 13 | 3 | 5 | 10 | 3 | ±0-100 | 1.4 or less |
2046S-09 | 2046SB-09 | 0.01 | 10 (1) | 15 | 3 | 5 | 10 | 3 | ±0-100 | 1.4 or less |
2047S | 2047SB | 0.01 | 10 (1) | 13 | 3 | 5 | 10 | 3 | 0-50-0 | 1.4 or less |
2902S | 2902SB | 0.01 | 10 (1) | 13 | 3 | 5 | 10 | 3 | 100-0 | 1.4 or less |
2310S-10 | 2310SB-10 | 0.01 | 10 (1) | 15 | 3 | 5 | 10 | 3 | ±0-100 | 1.4 or less |
2044S | 2044SB | 0.01 | 5 (1) | 12 | 3 | 5 | 10 | 3 | ±0-100 | 1.4 or less |
2044S-09 | 2044SB-09 | 0.01 | 5 (1) | 12 | 3 | 5 | 10 | 3 | ±0-100 | 1.4 or less |
2045S | 2045SB | 0.01 | 5 (1) | 12 | 3 | 5 | 10 | 3 | 0-50-0 | 1.4 or less |