機械仕様
| Model | QMC-600 | |
| TRAVEL | X x Y x Z axis | 610 x 410 x 530 mm |
| Spindle nose to table | 100~630 mm | |
| Spindle center to solidm column surface | 495 mm | |
| TABLE | Working area | 900 x 410 mm |
| Max. loading | 300 kg | |
| T-Slots (No. x Width x Pitch) | 3 x 18 x 125 mm | |
| SPINDLE | Tool shank (optional) | BBT-40 |
| Speed | 12,000 rpm | |
| Transmission | High Speed Direct Drive | |
| Bearing lubrication | Grease | |
| Cooling system | Oil cooled | |
| Spindle motor max.rating (MITSUBISHI) | 7.5kw (10HP) | |
| Spindle motor max.rating (FANUC) | 7.5kw (10HP) / 11kw (15HP) | |
| Axis motor max.rating (MITSUBISHI) | 1.5 / 2.2 / 3.0 kw | |
| Axis motor max. rating (FANUC) | 1.8 / 1.8 / 2.5 kw (STD) 3.0 / 3.0 / 4.0 kw (OPT) |
|
| FEED RATES | Rapids on X & Y & Z axis(linear guideway) | 48 / 48 / 48 m/min |
| Max. cutting federate | 10 m/min | |
| TOOL MAGAZINE | Tool storage capacity | 20 |
| Type of tool (optional) | BBT-40 | |
| Max. tool diameter | 76 mm (Arm) | |
| Max. tool weight | 5 kg | |
| Max. tool length | 230 mm | |
| AVG. CHANGING TIME(A) | Tool to tool | 2.5 sec. |
| Chip to chip (50% Z axis) | 3.6. sec. | |
| Air source required | 6 kg / c㎡ up | |
| ACCURACY | Positioning | P 0.01 mm |
| Repeatability | Ps 0.006 mm | |
| DIMENSION | Machine weight | 4,000 |
| Power source required (KVA.) | 15 KVA | |
| Floor space (L x W x H) | 1,900 x 2,260 x 2,600 mm | |
| Shipment advice | 1 x 40’HQ (4 sets) |
