PCB Routers Line-up
Routers for contour routing
RCMB/RCM series, RHM series Standard diamond-cut type router
RCMB/RCM/RHM routers have diamond-cut geometry and can be used for contour routing on most general printed circuit boards. The design offers good swarf evacuation and long life.
*(RHMFT) |
RCMB/RCM series, up draft type: RHM series, down draft type: |
SC series Chip-breaker flute router
SIZE:ø0.6-3.175mm *Some models are made to order. |
The SC router has a right hand, up draft design with a chip-breaker geometry that chops the swarf into smaller parts and helps to reduce the radial load on the spiral flute. It is suitable for peripheral contour routing. And this series have a beneficial effect on burr reduction. |
SCMB/SCM series Chip-breaker flute router
SIZE:ø0.8-1.8mm *Some models are made to order. |
The SCMB/SCM routers are suitable for general routing and slitting. It also has higher ability to resist breakage and good dimensional stability. |
RLE series Chip-breaker flute router
SIZE:ø1.0-2.0mm *Some models are made to order. |
The RLE router has improved design for good swarf evacuation, and it is made from anti-wear material. This router keeps good accuracy in long routing distance. This router shows best performance in contour routing. |
Routers for slitting
RP series Up draft 2-flute slitting router
SIZE:ø0.4-3.175mm *Some models are made to order. |
The RP router has a right hand, up draft design for slitting.Because swarf is evacuated upwards, this router is suitable for CNC routing machines with vacuum extraction. |
RPU series Up draft 2-flute slitting router with ULF coating
SIZE:ø0.4-3.175mm *Limited availability; May require special order. |
The RPU router is a ULF-coated version of RP series and the coating excels in self-lubricating performance. This series have a beneficial effect on burr reduction, because ULF coating can prevent deposition during routing nonferrous metals such as aluminum and copper. |
RS series Down draft 2-flute slitting router
SIZE:ø0.4-3.175mm *Some models are made to order. |
The RS router has a left hand, down draft design for slitting.It is suitable for slitting when dimensional precision is required. It is also suitable for spot facing work to prevent burr on the board surface. |
RPEM series UP draft 2-flute slitting and cavity router
SIZE:ø0.4-3.175mm *Some models are made to order. |
Right-hand helix 2-flute type with flat end cutting edges. Performs both slitting and pocket milling with excellent surface finish on the wall and bottom of the pocket. |
Routers for soft materials
SF series DP type single-flute router
SIZE:ø0.8-3.175mm *Limited availability; May require special order. |
The SF router is an up draft spiral single-flute router with a large chip pocket design. This router prevents a rise of cutting heat and provides excellent routing performance in soft materials such as Teflon and flexible boards. |
Cutters for spot facing
SM series Semilunar type cutter
SIZE:ø1.0-3.0mm *Limited availability; May require special order. |
The SM cutter is suitable for small spot facing on the surface of printed circuit boards for surface mounted components.Its simple shape is suitable for the finishing of the recess face with appropriate roughness for mounting components. |
SI series Straight 2-flute type cutter
SIZE:ø1.0-3.0mm *Limited availability; May require special order. |
The SI cutter offers improved quality of the recess surface after spot facing, and prevents surface distortion on the back side of the boards when thin boards are cutting. |
Cutters for V-shape grooving
RV series V-groove cutter
SIZE:ø1.0-3.175mm *Limited availability; May require special order. |
The RV cutter is a V-groove cutter for standard printed circuit boards.It offers stable V-groove cutting without burr and unevenness. |
Routers for nonferrous metals
RA series Router for nonferrous metals
SIZE:ø0.8-3.0mm *Limited availability ; May require special order |
The RA router has a sharp rake angle on peripheral cutting edge. It is suitable for nonferrous metal such as aluminum and copper. Because the top geometry is similar to drill bit, this series can be applied to the board which needs drilling. |
RAU series Router for nonferrous metals with ULF coating
SIZE:ø0.8-3.0mm *Limited availability; May require special order. |
The RAU router is a ULF-coated version of RA series, and the coating excels in self-lubricating. This series have a beneficial effect on burr reduction, because ULF coating can prevent deposition during routing nonferrous metals such as aluminum and copper. In addition, because the top geometry is similar to drill bit, this series can be applied to the board which needs drilling. |
Cutters for contour finishing
RI series Notched straight 3-flute type cutter
SIZE:ø0.8-3.175mm *Limited availability; May require special order. |
The RI cutter has notched straight 3-flute design, and allows chips to be divided. It is suitable for contouring the general glass epoxy boards as well as nonferrous metallic boards and offers an excellent surface finish. |
Diamond coated routers
DCE series Diamond Coated Routers with Chip-breaker flute
SIZE:ø1.5-2.5mm *Limited availability; May require special order. |
Union Tool diamond coating features excellent adhesion on the tools with a very hard surface. It is applied on the routers that are designed for high rigidity and efficient swarf evacuation. The DC routers achieve outstanding tool life and stable dimensional accuracy even on cutting-resistant materials. DCET series have modified base design for further improvement in rigidity. |
DCRP series UP draft 2-flute slitting Diamond Coated Routers
SIZE:ø1.5-2.0mm *Limited availability; May require special order. |
Diamond coating on up draft 2-flute slitting router (DCRP) offers excellent wear resistance. Union Tool diamond coating features excellent adhesion on the tools with a very hard surface. DCRP series are suitable for metal boards with insulating layers (IMS). |
