CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net Thu, 11 Jul 2024 01:32:18 +0000 ja hourly 1 //wordpress.org/?v=5.7.12 //ixox.net/wp-content/uploads/2021/01/cropped-logo-32x32.png CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net 32 32 CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/1%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-space-turn-lb-ex-%e2%85%b1-series/ //ixox.net/1%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-space-turn-lb-ex-%e2%85%b1-series/#respond Tue, 13 Apr 2021 09:24:09 +0000 //ixox.net/?post_type=product&p=10461
  • メーカー: OKUMA
  • 型式: LB2000 EX ? LB2500 EX ? LB3000 EX ? LB4000 EX ?/li>
  • 箱形ベッド上に主軸台・刃物台の主要ユニットを最適配置し、抜群の寸法安定性と高い剛性を実現。重切削でも安定した加工精度を発揮します?/li> ]]> T全身、高精度仕様

    造りが違う、剛性が違う
    ボックススラントベッド構?/strong>

    箱形ベッド上に主軸台・刃物台の主要ユニットを最適配置し、抜群の寸法安定性と高い剛性を実現。重切削でも安定した加工精度を発揮します?/p>

    Máy tiện CNC 1 bàn trượt OKUMA SPACE TURN LB EX ?series

    他の追随を許さない寸法安定?/strong>
    サーモフレンドリーコンセプト

    独自の構造設計と熱変位制御技術により驚異的な加工精度を実現する「サーモフレンドリーコンセプト」を全機種に採用しました。わずらわしい補正や暖機運転から解放され、長時間連続加工、複合加工、サブ主軸による表裏加工、さらにＹ軸加工でも抜群の寸法安定性を発揮します?/p>

    クラス最高の加工能力で生産性向?/strong>

    LB3000EXⅡ実績例

    D?liệu thực t?LB3000 EX ? width= D?liệu thực t?LB3000 EX ? width=

    豊富なバリエーション

    Y軸機能で完全工程集約
    複雑形状ワークもワンチャック加工

    ダブルスライド方式による高精度・広範囲なＹ軸ストロークにより、多彩なミーリング加工に対応。ワンチャッキングでの完全工程集約を実現します。（MY・MYW仕様?/p>
    Hoàn thành đa nhiệm với các chức năng trục Y Hoàn thành đa nhiệm với các chức năng trục Y

    多様な機種展?/strong>

    シリーズ展開4機種で、加工ワークに最適な機械サイズをお選び頂けます?/p>
    Máy tiện CNC 1 bàn trượt OKUMA SPACE TURN LB2000 EX ? width=

    最大加工径 ø430mm
    最大加工長 500mm

    		 Máy tiện CNC 1 bàn trượt OKUMA SPACE TURN LB2500 EX ? width=

    最大加工径 ø410mm
    最大加工長 150mm
    Máy tiện CNC 1 bàn trượt OKUMA SPACE TURN LB3000 EX ? width=

    最大加工径 ø410mm
    最大加工長 1,300mm

    		 Máy tiện CNC 1 bàn trượt OKUMA SPACE TURN LB4000 EX ? width=

    最大加工径 ø480mm
    最大加工長 2,150mm

    Video (LB3000 EX?:

    » カタログダウンロー?/strong>

    LB2000 EX ?/b> (PDF 464KB)

    LB2500 EX ?/b> (PDF 433KB)

    LB3000 EX ?/b> (PDF 493KB)

    LB4000 EX ?/b> (PDF 481KB)

    ]]>     //ixox.net/1%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-space-turn-lb-ex-%e2%85%b1-series/feed/ 0 CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/1%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-genos-l%e2%85%b1-series/ //ixox.net/1%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-genos-l%e2%85%b1-series/#respond Tue, 13 Apr 2021 09:09:13 +0000 //ixox.net/?post_type=product&p=10459
  • メーカー: OKUMA
  • 型式: GENOS L250? GENOS L400?/li>
  • コンパクト・高速動作で生産性アップ?/li> ]]> Máy tiện 1 bàn trượt OKUMA GENOS L?series

    生産性を向上

    コンパクト・高速動作で生産性アップ

    各軸の送り速度を従来機よりアップし、生産性を向上?br /> 設置?,400mm（GENOS L250Ⅱ）の高剛性構造が、強力切削時の負荷を支え、高い生産性を提供します?/p>

    Máy tiện 1 bàn trượt OKUMA GENOS L?series

    旋削刃物?/strong>

    刃物台仕?/strong>
    刃物台にはV8、V12刃物台を用意しました?br /> ø32mmまでのボーリングバーが取付可能です?/p>

    Máy tiện 1 bàn trượt OKUMA GENOS L?series

    あらゆる現場での使いやすさを徹底追求

    寄付きの良い機械構?/strong>

    機械前面から主軸中心まで260mmと、主軸への寄付きがよく、オペレータの作業負担を軽減します。機械の高さ?,620mmと低く、他の機械や作業者の様子を容易に把握できます?/p>

    Máy tiện 1 bàn trượt OKUMA GENOS L?series

    抜群の切粉処?/strong>

    切粉排出口を従来機比較で1.8倍に拡大。切粉の堆積を最小限に抑えます。清掃の頻度を少なくして、稼働時間を最大化します?/p>

    Máy tiện 1 bàn trượt OKUMA GENOS L?series

    油圧心押?/strong>

    高剛性・低心高の油圧心押台が強力・高精度加工をサポートします?/p>

    Máy tiện 1 bàn trượt OKUMA GENOS L?series

    クーラントタンクのメンテナンスを簡単?/strong>

    別置式のクーラントタンクにより、コンベヤを外すことなくタンクのみを引出し、清掃が可能です。また、メンテナンススペース内で洗浄が可能で、最小限のスペースに設置可能です?/p>

    Máy tiện 1 bàn trượt OKUMA GENOS L?series

    VIDEO:

    ]]>     //ixox.net/1%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-genos-l%e2%85%b1-series/feed/ 0 CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/1%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-genos-l2000-l3000/ //ixox.net/1%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-genos-l2000-l3000/#respond Tue, 13 Apr 2021 09:03:08 +0000 //ixox.net/?post_type=product&p=10458
  • メーカー: OKUMA
  • 型式: GENOS L2000, GENOS L3000
  • 求められる能力・精度を十分に満たし、高い生産性を実現?/li> ]]> Máy tiện CNC 1 bàn trượt OKUMA GENOS L2000/L3000

    求められる能力・精度を十分に満たし、高い生産性を実現

    強力・高品位加工を実?/strong>

    主軸にはビルトインモータ主軸を採用。高速・高出力による高い加工能力に加えて高品位な加工が可能です。また、オークマ伝統のすべりガイドの高剛性構造により、強力切削時の負荷を支え、高い生産性を提供します。刃物台は、V8、V12刃物台の2種類を用意しました。加工内容に応じて、選択いただけます?/p>

    Đạt được hiệu suất gia công mạnh m? chất lượng cao

    高精度なミーリング加?/strong>

    ミーリング仕様の刃物台には全箇所に回転工具を取付け可能?br /> 主軸?.001°割り出し指令により、任意の角度での高精度ミーリング加工が可能です。複合刃物台にはVDI刃物台とラジアル刃物台の2種類を用意しました?/p>

    Phay chính xác cao

    センタワークの段取りを簡単に

    心押台にはサーボモータ制御のNC心押台を採用。移動や推力をプログラム指令で設定でき、操作性が大幅に向上?br /> 容易な段取り替えが可能になりました?/p>

    Đơn giản hóa quá trình gia công

    加工に集中できる、高い作業?/strong>

    寄付きの良い機械構?/strong>

    機械前面から主軸中心まで380mmと主軸への寄付きがよく、オペレータの作業負担を軽減します?/p>

    Máy được thiết k?tối ưu đ?có kh?năng tiếp cận tốt

    抜群の切粉処?/strong>

    切粉排出口を従来機比較で2倍と拡大することで切粉の堆積を最小限に抑えます。清掃の頻度を少なくして、稼働時間を最大化します?/p>

    X?phoi vượt trội

    VIDEO:

    ]]>     //ixox.net/1%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-genos-l2000-l3000/feed/ 0 CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/%e3%82%b3%e3%83%b3%e3%83%91%e3%82%af%e3%83%88cnc%e6%97%8b%e7%9b%a4-hj-250/ //ixox.net/%e3%82%b3%e3%83%b3%e3%83%91%e3%82%af%e3%83%88cnc%e6%97%8b%e7%9b%a4-hj-250/#respond Tue, 13 Apr 2021 08:58:44 +0000 //ixox.net/?post_type=product&p=10457
  • メーカー: OKUMA
  • 型式: HJ-250
    •  ]]>     Máy tiện CNC OKUMA HJ-250

    機械仕様

    Item Unit HJ-250
    Capacity Swing over bed mm (in.) ø450 (ø17.71)
    Max turning dia mm (in.) ø280 (ø11.02) [ø220 (ø8.66) (V12)]
    Max turning length mm (in.) 330 (12.99)
    Travels X axis mm (in.) 160 {+140 to -20} (6.30 {+5.51 to -0.79})
    Z axis mm (in.) 330 (12.99)
    Spindle Speed range min-1 {rpm} 30 to 3,000 [4,200]
    Speed ranges Infinitely variable
    Spindle nose JIS A2-6
    Spindle bore dia mm (in.) ø62 (ø2.44)
    Spindle bearing ID mm (in.) ø100 (ø3.94)
    Turret Type V8［V12?/span>
    No. of tools 8?2?/span>
    OD tool shank mm (in.) 25 (1)
    ID tool shank dia mm (in.) ø40 [32] (1-1/2 [1-1/4])
    Indexing time s 0.3 sec/ index
    Feedrates Rapid traverse m/min (ipm) X : 20 (787) Z : 25 (984)
    Cutting feed mm/rev X, Z : 0.001 to 200.0
    Tailstock
    [Optional]    		 Quill diameter mm (in.) [ø55 (ø2.16)]
    Quill taper [MT 4 (revolving center)]
    Quill travel mm (in.) [80 (3.15)]
    Motors Spindle kW (hp) 7.5/5.5 (10/7) (15 min/cont)[11/7.5 (15/10) (15 min/cont)]
    Axial drive kW (hp) X : 1.8 (2.5) Z : 2.5 (3.4)
    Coolant pump kW (hp) 0.25 (0.34)
    Power Requirements Power Source kVA Standard : 13.9, High power : 16.5
    Tank Coolant amount L (gal) 100 (26)
    Machine Size Height mm (in.) 1,590 (62.60)
    Floor space mm (in.) 1,595 × 1,589 (62.80 × 62.56)
    Weight (incl. CNC) kg (lb) 2,800 (6,160)
    CNC FANUC-0iTD

    [ ]: Optional

    ]]>     //ixox.net/%e3%82%b3%e3%83%b3%e3%83%91%e3%82%af%e3%83%88cnc%e6%97%8b%e7%9b%a4-hj-250/feed/ 0     CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/2%e8%bb%b8%e5%88%b6%e5%be%a1cnc%e6%97%8b%e7%9b%a4-hl-series-hl-20-hl-35/ //ixox.net/2%e8%bb%b8%e5%88%b6%e5%be%a1cnc%e6%97%8b%e7%9b%a4-hl-series-hl-20-hl-35/#respond Tue, 13 Apr 2021 08:56:46 +0000 //ixox.net/?post_type=product&p=10456
  • メーカー: OKUMA
  • 型式: HL-20, HL-35, HL-35L
    •  ]]>     Máy tiện CNC giường nghiêng 2 trục HL series HL-20 / HL-35

    機械仕様

    Item Unit HL-20 HL-35(L)
    Standard High-speed Standard L
    Capacity Max swing over bed mm (in.) ø500 (19.69) ø500 (19.69)
    Std turning dia mm (in.) ø260 (10.24) ø300 (11.81)
    Max turning dia mm (in.) ø350 (13.78) ø350 (13.78)
    Max work length mm (in.) 460 (18.11) 610 (24.02) 1,020 (40.16)
    Bar machining capacity mm (in.) ø51 (2.01) ø78 (3.07)
    Distance between centers mm (in.) 480 (18.90) 610 (24.02) 1,020 (40.16)
    Headstock Spindle nose A2-6 A2-8
    Spindle front dia mm (in.) ø100 (3.94) ø130 (5.12)
    Spindle bore dia mm (in.) ø62 (2.44) ø92 (3.62)
    Spindle Speed ranges Infinitely variable Infinitely variable
    Spindle speed min-1 32?,200 45?,500 35?,500
    Spindle speed command system Spindle speed direct command Spindle speed direct command
    Spindle speed override % 50?50 50?50
    Turret Type V8 / V12 (Opt.) V12
    OD tool shank mm (in.) ?5 (0.98) ?5 (0.98)
    Boring bar dia mm (in.) ø32, ø40 (1.26, 1.57) (V8) /
    ø40, ø50 (1.57, 1.97) (V12) (Opt.)    		 ø40, ø50 (1.57, 1.97)
    Feedrate Travel X axis mm (in.) 200 (7.87) 200 (7.87)
    Travel Z axis mm (in.) 460 (18.11) 610 (24.02) 1,020 (40.16)
    Rapid traverse X axis m/min(fpm) 24 (78.74) 24 (78.74)
    Rapid traverse Z axis m/min(fpm) 30 (98.43) 30 (98.43)
    Cutting feed override % 0?00 0?00
    Tailstock Tailstock quill mm (in.) ø100 (3.94) (Opt.) ø100 (3.94)
    Taper bore type MT5 (Opt.) MT5
    Quill travel mm (in.) 120 (4.72) (Opt.) 120 (4.72)
    Motor CNC control FANUC 31i-B FANUC 31i-B
    Spindle motor
    (cont/30 min)    		 kW AC 11/15 AC 15/18.5
    Motor for hydraulics kW AC 1.5 AC 1.5
    Slideway lubricant motor kW AC 0.017 AC 0.017
    Motor for coolant
    (for turret, tools)    		 kW AC 0.18 AC 0.18
    Total power capacity KVA 20 26
    Machine Size Floor space
    (length × width)    		 mm (in.) 1,810 × 1,600 (71.26 × 62.99) 2,430×1,630
    (95.67 × 64.17)    		 3,370×1,630
    (132.67 × 64.17)
    Height mm (in.) 1,795 (70.67) 1,895 (74.61)
    Weight kg (lb) 3,000 (6,600) 3,800 (8,360) 5,000 (11,000)
    ]]>     //ixox.net/2%e8%bb%b8%e5%88%b6%e5%be%a1cnc%e6%97%8b%e7%9b%a4-hl-series-hl-20-hl-35/feed/ 0     CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/%e5%af%be%e5%90%91%e4%b8%bb%e8%bb%b8%e3%82%bf%e3%83%bc%e3%83%8b%e3%83%b3%e3%82%b0%e3%82%bb%e3%83%b3%e3%82%bf-twin-star-lt-ex-series/ //ixox.net/%e5%af%be%e5%90%91%e4%b8%bb%e8%bb%b8%e3%82%bf%e3%83%bc%e3%83%8b%e3%83%b3%e3%82%b0%e3%82%bb%e3%83%b3%e3%82%bf-twin-star-lt-ex-series/#respond Tue, 13 Apr 2021 08:53:51 +0000 //ixox.net/?post_type=product&p=10455
  • メーカー: OKUMA
  • 型式: LT2000EX, LT3000EX
  • 左右同能力主軸による高能率加工。精度ビルトインモータを搭載した左右主軸は、C軸同期制御によって、主軸回転中にワークの受け渡しが可能です?/li> ]]> Trung tâm tiện 2 trục chính OKUMA TWIN STAR LT EX series

    理想的な1?工程のバランスを実現

    Trung tâm tiện 2 trục chính OKUMA TWIN STAR LT EX series

    左右同能力主軸による高能率加?/strong>

    高精度ビルトインモータを搭載した左右主軸は、C軸同期制御によって、主軸回転中にワークの受け渡しが可能です?/p>

    LT2000 EX:
    -Spindle motor: 11.5/7.5 kW (5 min/cont)
    -Bar dia: Standard spindle: ø51mm / Big-Bore spindle: ø65mm*1

    LT3000 EX:
    -Spindle motor: 22/15 kW (30 min/cont)
    -Bar dia: Standard spindle: ø65mm*2 / Big-Bore spindle: ø80mm

    *1. Left spindle only
    *2. Up to ø69 mm is possible with 10-inch chuck.
    Note: The chuck/cylinder used may limit machinable bar diameters.

    本格的な工程集約が可能な上下同能力刃物台

    上下ともにV16刃物台を採用し、複雑な形状、多工程加工、多品種生産に対応します。ツールのパーマネントセットで、段取時間の短縮が可能です?/p>

    LT2000 EX:
    -Milling-tool spindle motor: 5.5/3.7 kW (2 min/cont)

    LT3000 EX:
    -Milling-tool spindle motor: 7.1/4.1 kW (25 min/cont)

    With Rapid traverse: X axis: 30 m/min, Z axis: 40 m/min

    豊富なラインナップでベストな生産体制を実?/strong>

    上下3基の刃物台による同時加工、上下Y軸同時加工など、用途に合わせた仕様選択で、さらなる生産性向上、工程集約を実現します?/p>

    H?thống sản xuất tốt nhất với cấu hình đa dạngH?thống sản xuất tốt nhất với cấu hình đa dạng

    ?刃物台（特別仕様）でタクトタイム最小化

    上部の左右刃物台と下刃物台による同時加工で、バランスのとれたサイクルタイムを実現。加工時間を大幅に短縮できます?/p>

    Giảm thiểu thời gian thao tác với chức năng cài đặt đài dao th?3 (tùy chọn) Giảm thiểu thời gian thao tác với chức năng cài đặt đài dao th?3 (tùy chọn)

    すべての刃物台にY軸仕様（特別仕様）を付加

    上下Y軸同時加工が可能です?/p>
    LT2000 EX LT3000 EX
    Y-axis travel 95 mm
    YA, YB, YC: +50 to ?5    		 125 mm
    YA, YB, YC: +70 to ?5

    VIDEO TWIN STAR LT2000EX:

    機械仕様

    Model LT2000 EX
    2-turret specs 3-turret specs
    2M 1MY 2MY 3M 2MY 3MY
    Capacity Swing over saddle mm (in.) ø400 (ø15.75)
    Max machining dia ×
    length*1    		 mm (in.) ø210 × L130 (ø8.28 × L5.12)
    Distance between noses mm (in.) 960 (37.80) 990 (38.98)
    Travel X axis mm (in.) XA, XB: 205 (+175 to ?0) (8.07 (+6.89 to ?.18)) XA, XB, XC: 205 (+175 to ?0) (8.07 (+6.89 to ?.18))
    Z axis mm (in.) ZA, ZB: 700 (27.56), W: 730 (28.74) ZA, ZC: 400 (15.75), ZB: 730 (28.74), W: 760 (29.92)
    Y axis mm (in.) – YA: 95 (3.74)
    (+50 to ?5)
    (+1.97 to ?.77)    		 YA, YB: 95 (3.74)
    (+50 to ?5)
    (+1.97 to ?.77)    		 – YA, YB: 95 (3.74)
    (+50 to ?5)
    (+1.97 to ?.77)    		 YA, YB, YC: 95 (3.74)
    (+50 to ?5)
    (+1.97 to ?.77)
    C axis deg 360 (minimum control angle 0.001)
    Spindle (L/R) Speed min-1 50 to 6,000 [50 to 5,000 (Left spindle only)]
    Speed ranges 2 auto ranges (motor coil switching, 2 ranges)
    Spindle nose ø140 flat [JIS A2-6 (Left spindle only)]
    Spindle bore /
    Front bearing ID    		 mm (in.) ø62/100 (ø2.44/3.94) [ø80/120 (ø3.15/4.72) (Left spindle only)]
    Turret Type Multitasking V16 [V12]
    No. of tools 16 [12] (L, M)
    OD tool shank mm (in.) ?0/ø32 (?.79/ø1.26)
    Milling tool spindle speed min-1 45 to 6,000
    Rapid traverse X axis m/min (ipm) 30 (1,181)
    Z axis m/min (ipm) 40 (1,575)
    Y axis m/min (ipm) – 15 (591) – 15 (591)
    W axis m/min (ipm) 32 (1,260)
    C axis min-1 200
    Motors Main spindles kW (hp) L/R: 11.5/7.5 (15.3/10) [22/15 (30/20)] (5 min/cont)
    Milling tool kW (hp) 5.5/3.7 (7.5/5) (2 min/cont)
    X axis kW (hp) XA: 3.5 (4.7), XB: 3.0 (4) XA, XC: 3.5 (4.7), XB: 3.0 (4)
    Z axis kW (hp) ZA, ZB: 3.5 (4.7) ZA, ZB, ZC: 3.5 (4.7)
    Ys axis kW (hp) – YsA: 3.5 (4.7) YsA: 3.5 (4.7)
    YsB: 2.2 (3)    		 – YsA: 3.5 (4.7)
    YsB: 2.2 (3)    		 YsA, YsC: 3.5 (4.7)
    YsB: 2.2 (3)
    Coolant motor (50/60 Hz) kW (hp) 0.55/0.75 (0.7/1) × 3 0.55/0.75 (0.7/1) × 4
    Machine size Height mm (in.) Side discharge: 2,285 (89.96)
    Rear discharge: 2,435 (95.87)    		 Side discharge: 2,301 (90.59)
    Rear discharge: 2,451 (96.50)    		 Side discharge: 2,285 (89.96)
    Rear discharge: 2,435 (75.87)    		 Side discharge: 2,301 (90.59)
    Rear discharge: 2,451 (96.50)
    Floor space (including tank) mm × mm (in.) Side discharge: 3,745 × 2,464 (147.44 × 97.01), Rear discharge: 3,231 × 3,417 (127.20 × 134.53)
    Weight (with CNC) kg (Ib) 8,500 (18,700) 9,000 (19,800) 9,300 (20,460) 9,800 (21,560)
    CNC OSP-P300LA

    *1: Rough dimensions for work lengths that can be axially milled simultaneously on 2 turrets

    [ ] Optional

    Model LT3000 EX
    2-turret specs 3-turret specs
    2M 1MY 2MY 3M 2MY 3MY
    Capacity Swing over saddle mm (in.) ø550 (ø21.66)
    Max machining dia ×
    length*1    		 mm (in.) ø350 × L200 (ø13.78 × L7.88)
    Distance between noses mm (in.) 1,200 (47.25)
    Travel X axis mm (in.) XA, XB: 255 (+225 to ?0) (10.04 (+8.86 to ?.18)) XA, XB, XC: 255 (+225 to ?0) (10.04 (+8.86 to ?.18))
    Z axis mm (in.) ZA, ZB: 930 (36.61), W: 940 (37.01) ZA, ZC: 480 (18.90), ZB: 930 (36.61), W: 940 (37.01)
    Y axis mm (in.) – YA: 125 (4.92)
    (+70 to ?5)
    (+2.76 to ?.17)    		 YA, YB: 125 (4.92)
    (+70 to ?5)
    (+2.76 to ?.17)    		 – YA, YB: 125 (4.92)
    (+70 to ?5)
    (+2.76 to ?.17)    		 YA, YB, YC: 125 (4.92)
    (+70 to ?5)
    (+2.76 to ?.17)
    C axis deg 360 (minimum control angle 0.001)
    Spindle (L/R) Speed min-1 45 to 5,000 [45 to 4,200]
    Speed ranges 2 auto ranges (motor coil switching, 2 ranges)
    Spindle nose A2-6 [A2-8]
    Spindle bore /
    Front bearing ID    		 mm (in.) ø80/120 (ø3.15/4.72) [ø91/140 (ø3.58/5.51)]
    Turret Type Multitasking V16 [V12]
    No. of tools 16 [12] (L, M)
    OD tool shank mm (in.) ?5/ø40 (?.98/ø1.57)
    Milling tool spindle speed min-1 45 to 6,000
    Rapid traverse X axis m/min (ipm) 30 (1,181)
    Z axis m/min (ipm) 40 (1,575)
    Y axis m/min (ipm) – 20 (787) – 20 (787)
    W axis m/min (ipm) 40 (1,575)
    C axis min-1 200
    Motors Main spindles kW (hp) L/R: 22/15 (30/20) [30/22 (40/30)] (30 min/cont)
    Milling tool kW (hp) 7.1/4.1 (9.5/5.5) (25 min/cont)
    X axis kW (hp) XA, XB: 3.5 (4.7) XA, XB, XC: 3.5 (4.7)
    Z axis kW (hp) ZA, ZB: 3.5 (4.7) ZA, ZB, ZC: 3.5 (4.7)
    Ys axis kW (hp) – YsA: 3.5 (4.7) YsA: 3.5 (4.7)
    YsB: 2.2 (3)    		 – YsA: 3.5 (4.7)
    YsB: 2.2 (3)    		 YsA, YsC: 3.5 (4.7)
    YsB: 2.2 (3)
    Coolant motor (50/60 Hz) kW (hp) 0.55/0.75 (0.7/1) × 3 0.55/0.75 (0.7/1) × 4
    Machine size Height mm (in.) Side discharge: 2,650 (104.33)
    Rear discharge: 2,750 (108.27)
    Floor space (including tank) mm × mm (in.) Side discharge: 4,504 × 2,750 (177.32 × 108.27), Rear discharge: 3,994 × 3,743 (157.24 × 147.36)
    Weight (with CNC) kg (Ib) 11,200 (24,640) 12,600 (27,720)
    CNC OSP-P300LA

    *1: Rough dimensions for work lengths that can be axially milled simultaneously on 2 turrets

    [ ] Optional

    ]]>     //ixox.net/%e5%af%be%e5%90%91%e4%b8%bb%e8%bb%b8%e3%82%bf%e3%83%bc%e3%83%8b%e3%83%b3%e3%82%b0%e3%82%bb%e3%83%b3%e3%82%bf-twin-star-lt-ex-series/feed/ 0 CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/2%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-simul-turn-lu-ex-series/ //ixox.net/2%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-simul-turn-lu-ex-series/#respond Tue, 13 Apr 2021 08:47:44 +0000 //ixox.net/?post_type=product&p=10454
  • メーカー: OKUMA
  • 型式: LU3000EX, LU4000EX
  • 上下刃物台による同時4軸加工で大幅な加工時間短縮を実現?/li> ]]> Máy tiện CNC 2 đài dao SIMUL TURN LU EX series

    4軸のフレキシビリティで実現する多彩な加工

    上下刃物台による同時4軸加工で大幅な加工時間短縮を実現

    Đáp ứng nhiều kiểu gia công với s?linh hoạt của 4 trục

    上下刃物台での同時外径旋削や内外径同時旋削で加工時間を大幅に短縮します?br /> 4軸同時加工以外にも、仮受台や下刃物台取付振止などの特別仕様と組み合わせることで、可能性は無限大です?/p>

    Đáp ứng nhiều kiểu gia công với s?linh hoạt của 4 trục

    振止で長尺ワークをびびらずに加工

    振止（特別仕様）を下刃物台に取り付け、ワークをサポート。NCプログラムで上刃物台と同期制御することで、長尺ワークや突出の長い片持ちワークの加工でも常に加工箇所の近くをサポート可能です?/p>

    Tiện các trục dài với đ?ổn định cao, không rung động

    バランスカットで長尺ワークを高能率加?/strong>

    同時加工によりパス回数が半減。びびりを防ぎながら、加工時間を大幅に短縮できます?/p>

    Gia công hiệu qu?cao các phôi dài với đường cắt cân bằng

    サイクルタイム短縮を実現する強力加工、高速動?/strong>

    負荷の大きな同時加工もパワフルにこなす高い加工能力（実績値）

    Hiệu suất gia công cao (giá tr?thực t? có th?x?lý mạnh m?quá trình tiện đồng thời với tải lớn

    豊富なラインナップでベストな生産体制を実?/strong>

    Y軸機能で工程集約
    複雑形状ワークもワンチャック加工

    Cung cấp h?thống sản xuất tốt nhất với đa dạng tính năng tích hợp

    ダブルスライド方式による高精度・広範囲なY軸ストロークにより、多彩なミーリング加工に対応。ワンチャッキングでの工程集約を実現します。（MY仕様?/p>
    LU3000 EX LU4000 EX
    Y-axis-travel 120 mm (+70 to ?0) 140 mm (+70 to ?0)
    Y-axis rapid traverse 12.5 m/min 12.5 m/min

    Cung cấp h?thống sản xuất tốt nhất với đa dạng tính năng tích hợp

    サブスピンドルによる工程結合
    表裏加工?台で完結

    サブスピンドル仕様により表裏加工?台でこなします?br /> 1台で両端面の加工が完結できるので、ワークの保管スペースや後工程用の機械が不要となります。（LU3000 EXのみ?/p>

    Trục ph?cho các hoạt động tích hợp trước/sau (1 máy)

    Trục ph?cho các hoạt động tích hợp trước/sau (1 máy)

    VIDEO SIMUL TURN LU4000 EX:

    機械仕様

    Item LU3000 EX LU4000 EX
    Capacity Max turning diameter mm (in.) ø410 (ø16.14) ø480 (ø18.90)
    Distance between centers mm (in.) 600, 1,000
    (23.62, 39.37)    		 650, 1,250, 2,000, 3,000
    (25.59, 49.21, 78.74, 118.11)
    Spindle Speed min-1 5,000 4,200
    Spindle noze JIS A2-6 JIS A2-8
    Front bearing dia mm (in.) ø120 (ø4.72) ø140 (ø5.51)
    Turret No. of tools tools Upper turret: 12 , lower turret: 8 Upper turret: 12 , lower turret: 10
    Feedrates Rapid traverse m/min (fpm) X: 25, Z: 30 (X: 82, Z: 98) X: 25, Z: 30 (X: 82, Z: 98)
    Tailstock Quill bore taper MT.No.5 MT.No.5
    Motors Spindle kW (hp) 22/15 (30/20) (30 min/cont) 22/15 (30/20) (30 min/cont)
    Max torque N-m 427/280 (10 min/cont) 700/477 (30 min/cont)
    Machine size Height mm (in.) 2,080, 2,230 (81.89, 87.80) 2,200, 2,440 (86.61, 96.06)
    Floor space mm (in.) 2,950 × 2,176, 3,980 × 2,478
    (116.14 × 85.67, 156.69 × 97.56)    		 3,570 × 2,310, 4,780 × 2,620
    (140.55 × 90.94, 188.19 × 103.15)
    CNC OSP OSP
    ]]>     //ixox.net/2%e3%82%b5%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-simul-turn-lu-ex-series/feed/ 0 CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/%e6%a8%aa%e5%bd%a2%e4%b8%a6%e8%a1%8c2%e3%82%b9%e3%83%94%e3%83%b3%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-2sp-2500h/ //ixox.net/%e6%a8%aa%e5%bd%a2%e4%b8%a6%e8%a1%8c2%e3%82%b9%e3%83%94%e3%83%b3%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-2sp-2500h/#respond Tue, 13 Apr 2021 08:37:45 +0000 //ixox.net/?post_type=product&p=10453
  • メーカー: OKUMA
  • 型式: 2SP-2500H (L), 2SP-2500H (M)
  • 高速ローディングと強力ミーリング加工でサイクルタイムを最短に
    • ]]>     Máy tiện CNC 2 trục nằm ngang OKUMA 2SP-2500H

    高速ローディングと強力ミーリング加工でサイクルタイムを最短に

    高速ローディングと強力加工を実現する機械構?/strong>

    ワークの着脱時間を4秒に短縮し、加工からワーク搬送までのラインタクトを最短化?br /> また、強固なすべりガイドの上に移動体（主軸台・刃物台）の重心を配置?br /> 量産加工に最適な機械構造で強力・高精度加工を実現しました?/p>

    Cấu trúc máy tối ưu cho vận hành tốc đ?cao và gia công mạnh m? width=

    大幅に強化した主軸で生産性を向上

    主軸はビルトインモータ駆動により高速・高精度化しました?br /> 回転工具主軸?.1kWに高出力化し、従来機よりトルクを1.25倍、エンドミル加工能力?5cm 3/min?倍に強化しました。ミーリング加工の工程集約が可能です?/p>

    Cải thiện năng suất với trục chính mạnh hơn đáng k? width=

    高速ローダでラインタクトを最短に

    ワーク着脱時は主軸台が着脱位置に移動。刃物台の位置にかかわらずローダが機械へ進入可能です?br /> また、サーボ駆動のハンド旋回、あらゆる動作の高速化により、ワーク着脱時??※を実現しました?br /> ※上部ドア開閉時間含まず?/span>
    着脱時?秒は実績値であり、運転条件によっては4秒より長くなる場合があります?/span>

    Transportable weight 4kg × 2pcs 8kg × 2pcs
    Workpiece dimensions ø200 × L125 ø250 × L80

    Thời gian x?lý rút ngắn với b?nạp tốc đ?cao

    長時間、高精度に安定加?/strong>

    高品位加工を実現する切割構造のベッ?/span>

    Giường phân tách đ?gia công chất lượng caoベッド形状は切割構造を採用。左右分離することで切削時の振動伝達を抑制します。高い面粗度要求にも効果を発揮します?/p>

     

     

     

     

     

     

    最大?50mmの量産部品加工に最?/span>

    ø250mmワークのローダ搬送に対応し、量産部品のミニマムタクトを実現します?br /> M仕様では回転工具主軸能力を強化し、より多彩な工程集約が可能です?/p>

    Lý tưởng đ?sản xuất hàng loạt các chi tiết lên đến ø250 mm Lý tưởng đ?sản xuất hàng loạt các chi tiết lên đến ø250 mm

    VIDEO (2SP-2500H):

    機械仕様

    Model Unit 2SP-2500H (L) 2SP-2500H (M)
    Capacity Standard chuck size 8 [10]
    Travels X- / Z-axis mm (in.) 210 (8.27) / 200 (7.87)
    C-axis control angle deg – 360 (minimum control angle 0.001)
    Spindles Spindle speed min-1 45 to 5,000
    Spindle speed ranges 2 auto ranges (2-speed motor coil switching)
    Spindle nose type JIS A2-6
    Spindle bore dia/Spindle bearing dia mm (in.) ø62 (2.44) / ø100 (3.94)
    Turrets Turret type V12 + V12 Multitasking V12 + Multitasking V12
    No. of turret tools tools 12 + 12 For both L, M 12 + 12
    OD tool shank size mm (in.) ?5 (0.98)
    ID tool shank diameter mm (in.) ø40 (1.57)
    Milling tool Milling tool spindle speed min-1 – 45 to 6,000
    Milling tool speed range – Infinitely variable
    Feed rates Rapid feed rate X, Z-axis m/min (fpm) X: 25 (82), Z: 25 (82)
    Rapid feed rate C-axis min-1 – 200
    Cutting feed rate X, Z-axis mm/rev 0.001 to 1,000.000
    Motors Motor spindle kW (hp) 15 (20) / 11 (15) (20 min/cont)
    Milling tool spindle motor kW (hp) – OSP: 7.1 (9) /4.1 (5) (25 min/cont)
    FANUC: 5.5 (7.5) (cont)
    Axis drive motors (X / Z) kW (hp) OSP: 3.0 (4) / 2.8 (4) FANUC: 2.7 (3.6) / 4.5 (6)
    Coolant motor (50/60 Hz) kW (hp) 0.55 ( 0.7) / 0.75 (1)
    Machine size Machine height mm (in.) 3,259 (128.31) (maximum loader height)
    Required floor space:
    length × width (including tank)    		 mm×mm (in.×in.) 2,200 × 2,734 (86.61 × 107.64) (w/o loader)
    Machine weight kg (lb) 8,000 (17,600) (w/loader)
    CNC OSP-P300LA/FANUC 0i-TF [Twin loader specs: FANUC 31i-B]

    [ ]: Optional

    ローダ仕様

    Model Unit 2SP-2500H (L) 2SP-2500H (M)
    Loader Transportable parts size (dia × length) mm (in.) 4 kg specs: ø200 × 125 (7.87 × 4.92) [8 kg specs: ø250 × 80 (9.84 × 3.15)]
    Transportable parts weight × number kg (ib) × pts 4 (8.8) × 2 [8 (17.6) × 2]
    X-axis travel (traveling axis) mm (in.) 2,838 (111.73) (with work tables on right and left)
    Y-axis travel (vertical axis) mm (in.) 750 (29.53)
    Z-axis travel (front/back axis) mm (in.) 290 (11.42)
    Rapid feed rate X, Y, Z-axis m/min (fpm) X: 180 (591), Y: 110 (361), Z: 48 (157)
    Hand type Swivel-type double hand, 3-jaw air chuck
    Gripper open/close travel mm (in.) ø32 (1.26) (effective travel: ø24 (0.94))
    Work table Loaded workpiece diameter mm (in.) ø40 (1.57) to ø250 (9.84)
    Loaded workpiece mass kg (lb) 50 (110) /1 station
    Stacking height mm (in.) 450 (17.72)
    No. of stations 16

    [ ]: Optional

    ]]>     //ixox.net/%e6%a8%aa%e5%bd%a2%e4%b8%a6%e8%a1%8c2%e3%82%b9%e3%83%94%e3%83%b3%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-2sp-2500h/feed/ 0     CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/%e6%a8%aa%e5%bd%a22%e3%82%b9%e3%83%94%e3%83%b3%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-2sp-150h/ //ixox.net/%e6%a8%aa%e5%bd%a22%e3%82%b9%e3%83%94%e3%83%b3%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-2sp-150h/#respond Tue, 13 Apr 2021 08:31:27 +0000 //ixox.net/?post_type=product&p=10452
  • メーカー: OKUMA
  • 型式: 2SP-150H
    •  ]]>     Máy tiện CNC 2 trục song song OKUMA 2SP-150H

    機械仕様

    Model 2SP-150H
    Capacity Chuck size 6 in [8 in]
    Max turning dia mm (in.) ø150 <ø220>*1 (ø5.91 <ø8.66>)
    Max turning length mm (in.) 80 <150>*1 (3.15 <5.91>)
    No. controlled axes 4
    Travels X axis mm (in.) 150 (5.91)
    Z axis mm (in.) 155 (6.10)
    Spindles Speed range min-1 (rpm) 50 to 4,500 [6,000]
    No. of speed ranges min-1 Infinitely variable
    Nose ø140 (ø5.51) flat
    Bore dia mm (in.) ø42 (ø1.65)
    Bearing ID mm (in.) ø80 (ø3.15)
    Turrets Type V12
    No. of tools 12
    OD tool shank mm (in.) ?5 (1)
    ID tool shank mm (in.) ø40 (ø1.57)
    Rapids (X-Z) mm/min (ipm) 24,000 (945)
    Motors Spindle (30 min/cont) kW (hp) 11/7.5 (15/10) × 2
    Saddle (X) kW (hp) BL 2.5 (3.4) × 2
    Cross slide (Z) kW (hp) BL 2.5 (3.4) × 2
    Machine size Height *2 mm (in.) 2,593 (102.09)
    Floor space *3 mm (in.) 1,850 × 2,150 (72.83 × 84.65)
    Weight *4 kg (lb) 5,000 (11,000)

    [ ] : Optional

    *1. < > : Machine capacity without loader application

    *2. With max loader height

    *3. Machine only

    *4. Loader included

    ]]>     //ixox.net/%e6%a8%aa%e5%bd%a22%e3%82%b9%e3%83%94%e3%83%b3%e3%83%89%e3%83%abcnc%e6%97%8b%e7%9b%a4-2sp-150h/feed/ 0     CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/%e7%ab%8b%e5%bd%a2cnc%e6%97%8b%e7%9b%a4-v760ex-2sp-v760ex-v920ex-2sp-v920ex/ //ixox.net/%e7%ab%8b%e5%bd%a2cnc%e6%97%8b%e7%9b%a4-v760ex-2sp-v760ex-v920ex-2sp-v920ex/#respond Tue, 13 Apr 2021 08:29:13 +0000 //ixox.net/?post_type=product&p=10451
  • メーカー: OKUMA
  • 型式: V760EX, 2SP-V760EX, V920EX, 2SP-V920EX
  • チャッキングが難しい大径薄物ワークやアンバランスな異形ワークも安定して加工できます?/li> ]]> Máy tiện CNC đứng V760EX / 2SP-V760EX / V920EX / 2SP-V920EX

    大径ワークを安定加工

    チャッキングが難しい大径薄物ワークやアンバランスな異形ワークも安定して加工できます?/p>
    Pulley

    プーリー

    		 Bearing

    ベアリン?/td>

    		Valve body

    バルブボディ

     

    ワイドな加工領域が幅広い加工ニーズに対応

    省スペース化を図りながら、ワイドな加工領域を実現。異形ワークのチャッキングにも十分なスペース（最大振り：ø800mm/V760EX、?,000mm/V920EX）を確保し、お客様の幅広い加工ニーズに対応します?/span>

     

    Khu vực gia công lớn có th?đáp ứng nhiều nhu cầu khác nhau

    優れた高剛性構造で強力・高精度加工を実?/strong>

    剛性、減衰性の高い大形ベースに強固な箱形コラムを固定。刃先とガイドの距離が近く、重切削による負荷にも十分に耐えられる剛性を確保しました。X、Z軸の案内面には、角形すべりガイドを採用することで、大物ワークの強力・高精度加工を実現します?/span>

    Kết cấu tiên tiến, có đ?cứng vững cao cho phép gia công mạnh m?và rất chính xác

    立形旋盤の特性が高精度で安定した加工を実?/strong>

    ワークがチャック基準面に自重密着するため、安定してワークを把握できます。把握力によるワークの歪が抑えられるので、薄物ワークから大径・重量ワークまで、高精度で安定した加工が可能です?/span>
    また、クランプ治具を用いるような異形ワークの手動でのチャッキング時にもワークを支える必要がないので、着脱が容易です?/span>

    加工能力（実績値）

    Công suất gia công (d?liệu thực t?

    強力ミーリングで工程集約

    より強力に、より多数の工具を取付可能に

    Máy tiện CNC đứng V760EX / 2SP-V760EX / V920EX / 2SP-V920EX
    V760EX

    旋削と穴あけ・エンドミル加工?台で完結させ、幅広い加工に対応します?br /> 回転工具主軸を従来機から大幅にパワーアップし、より強力な加工と、より多彩な工程集約を可能にしました。隣接工具との干渉を最小化した刃物台は?2本全箇所にミーリング工具を取り付け可能です?br /> 旋削からミーリングまでをワンチャッキングで加工でき、仕掛品保管スペースや工程間の待ち時間を削減できます。また、ワーク取付時のチャッキング誤差を排除できるので、加工精度が向上します?/p>

     

     

    幅広い生産形態で製造現場を革新

    1?役の高生産性（2SP-V760EX?SP-V920EX?/strong>

    Năng suất cao với 2 chức năng trên 1 máy (2SP-V760EX, 2SP-V920EX)

    標準のR機（右）と左右反転構造のL機（左）を一体化し、一つの制御装置で動かす2スピンドル仕?2SP-V760EX?SPV920EX?br /> 1?工程の連続加工でリードタイム短縮、中間仕掛品の削減など、最小のフロアスペースで最大の生産性を引き出します?br /> また、左右分離構造のため、他軸の加工振動の影響を受けず、安定した加工が可能です?/p>

    • ロボットの走行距離を最短にした幅狭ラインの構築が可能です?/li>

     

    VIDEO: 

    機械仕様

    Item Unit V760EX 2SP-V760EX
    L M L M
    Capacity Max turning diameter mm (in.) ø760 (29.92)
    Max swing diameter mm (in.) ø800 (31.50)
    Swing on carriage mm (in.) ø610 (24.02)
    Max work length (height) mm (in.) 770 (30.31)
    Max workpiece weight (w/ chuck) kg (lb) 500 (1,100) [When limited to 1,000 kg/200 min-1]
    Height from floor to spindle nose*1 mm (in.) 1,085 (42.72)
    Travel X-axis travel mm (in.) 390 (15.35)
    Z-axis travel mm (in.) 770 (30.31)
    C-axis travel Degrees ?/span> 360 (minimum control angle 0.001) ?/span> 360 (minimum control angle 0.001)
    Spindle Spindle speed min-1 20 to 2,000
    Spindle speed ranges 2 auto ranges (2-speed motor coil switching)
    Spindle nose shape JIS A2-11
    Spindle bore diameter mm (in.) ø92 (3.62)
    Spindle front bearing diameter mm (in.) ø160 (6.30)
    Turret Turret type V12 M-V12 V12 + V12 M-V12 + M-V12
    No. of tools 12 L/M: 12 12 + 12 L/M: 12 + 12
    OD tool shank dimensions mm (in.) ?5, ?2 (1, 1-1/4)
    ID tool shank diameter mm (in.) ø40, ø50, ø63 (1.57, 1.97, 2.48)
    Milling tool Milling tool spindle speed min-1 ?/span> 4,000 ?/span> 4,000
    Milling tool spindle torque N-m ?/span> OSP:57.8/33.1 (25min/cont)
    FANUC:70/30 (inter/cont)    		 ?/span> OSP:57.8/33.1 (25min/cont)
    FANUC:70/30 (inter/cont)
    Milling tool speed range ?/span> Infinitely variable ?/span> Infinitely variable
    Feedrates Rapid traverse X, Z-axis m/min (fpm) X: 24 (78.74), Z: 24 (78.74)
    Rapid traverse C-axis min-1 ?/span> 20 ?/span> 20
    Cutting feedrate X, Z-axis mm/rev 0.001 to 300.000
    Motor Spindle drive kW (hp) 30/22 (40/30) (30 min/cont) 30/22 (40/30) (30 min/cont) × 2
    Milling tool spindle motor kW (hp) ?/span> OSP: 7.5/4.3 (10/5.7)
    (25 min/cont)
    FANUC: 5.5 (cont)    		 ?/span> OSP: 7.5/4.3 (10/5.7)
    (25 min/cont)
    FANUC: 5.5 (cont)
    Axis drive motors kW (hp) OSP
    X: 3.5 (4.7), Z: 4.6 (6.1) FANUC
    X: 4.0 (5.3), Z: 4.0 (5.3)    		 OSP
    X: 3.5 (4.7), Z: 5.2 (6.9) FANUC
    X: 4.0 (5.3), Z: 4.0 (5.3)    		 OSP
    X: 3.5 (4.7), Z: 4.6 (6.1) FANUC
    X: 4.0 (5.3), Z: 4.0 (5.3)    		 OSP
    X: 3.5 (4.7), Z: 5.2 (6.9) FANUC
    X: 4.0 (5.3), Z: 4.0 (5.3)
    Coolant pump motors (50 Hz/60 Hz) kW (hp) Turret: 0.25/0.25 (0.3/0.3) shower: 0.37/0.55 (0.5/0.7)
    Machine Size Machine height*1 mm (in.) 3,489 (137)
    Required floor space (length × width)*2 mm×mm (in.) 1,842 × 2,732 (72.52×107.56) 3,680 × 2,732 (144.88×107.56)
    Machine weight kg (lb) 8,500 (18,700) 8,700 (19,140) 17,000 (37,400) 17,400 (38,280)
    CNC OSP-P300LA, FANUC 0i-TF

    *1. Machine height and center height may become taller depending on attached cylinder type

    *2. Including tank, not including operation panel

    Item Unit V920EX 2SP-V920EX
    L M L M
    Capacity Max turning diameter mm (in.) ø920 (36.22)
    Max swing diameter mm (in.) ø1,000 (39.37)
    Swing on carriage mm (in.) ø710 (27.95)
    Max work length (height) mm (in.) 860 (33.86)
    Max workpiece weight (w/ chuck) kg (lb) 1,200 (2,640) [When limited to 2,000 kg/200 min-1]
    Height from floor to spindle nose*1 mm (in.) 1,150 (45.28)
    Travel X-axis travel mm (in.) 485 (19.09)
    Z-axis travel mm (in.) 860 (33.86)
    C-axis travel Degrees ?/span> 360 (minimum control angle 0.001) ?/span> 360 (minimum control angle 0.001)
    Spindle Spindle speed min-1 20 to 1,250
    Spindle speed ranges 2 auto ranges (2-speed motor coil switching)
    Spindle nose shape JIS A2-11
    Spindle bore diameter mm (in.) ø110 (4.33)
    Spindle front bearing diameter mm (in.) ø200 (7.87)
    Turret Turret type V12 M-V12 V12 + V12 M-V12 + M-V12
    No. of tools 12 L/M: 12 12 + 12 L/M: 12 + 12
    OD tool shank dimensions mm (in.) ?5, ?2 (1, 1-1/4)
    ID tool shank diameter mm (in.) ø40, ø50, ø63 (1.57, 1.97, 2.48)
    Milling tool Milling tool spindle speed min-1 ?/span> 4,000/3,000 (inter/cont) ?/span> 4,000/3,000 (inter/cont)
    Milling tool spindle torque N-m ?/span> OSP: 125.6/42
    (inter/cont)    		 ?/span> OSP: 125.6/42
    (inter/cont)
    Milling tool speed range ?/span> Infinitely variable ?/span> Infinitely variable
    Feedrates Rapid traverse X, Z-axis m/min (fpm) X: 24 (78.74), Z: 24 (78.74)
    Rapid traverse C-axis min-1 ?/span> 20 ?/span> 20
    Cutting feedrate X, Z-axis mm/rev 0.001 to 300.000
    Motor Spindle drive kW (hp) 30/22 (40/30) (30 min/cont) 30/22 (40/30) (30 min/cont)×2
    Milling tool spindle motor kW (hp) ?/span> OSP: 5.6 (7.5) (cont)
    FANUC: 5.5 (7.3) (cont)    		 ?/span> OSP: 5.6 (7.5) (cont)
    FANUC: 5.5 (7.3) (cont)
    Axis drive motors kW (hp) OSP X: 3.5 (4.7), Z: 5.2 (6.9)
    FANUC X: 4.0 (5.3), Z: 5.0 (6.7)
    Coolant pump motors (50 Hz/60 Hz) kW (hp) Turret: 0.28/0.46 (0.37/0.61) shower: 0.39/0.62 (0.52/0.83)
    Machine Size Machine height *1 mm (in.) 3,693 (145.39)
    Required floor space (length × width) *2 mm×mm (in.) 2,252 × 2,845 (88.66×112.01) [3,302 × 2,845 (130.00×112.01)]*3 4,500 × 2,845 (177.17×112.01)
    Machine weight kg (lb) 11,400 (25,080) 11,700 (25,740) 22,800 (50,160) 23,400 (51,480)
    CNC OSP-P300LA, FANUC 0i-TF

    *1. Machine height and center height may become taller depending on attached cylinder type

    *2. Including tank, not including operation panel

    *3: With ATC specs

    ]]>     //ixox.net/%e7%ab%8b%e5%bd%a2cnc%e6%97%8b%e7%9b%a4-v760ex-2sp-v760ex-v920ex-2sp-v920ex/feed/ 0 CNC 旋盤 – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/%e7%ab%8b%e5%bd%a2cnc%e6%97%8b%e7%9b%a4-v-series/ //ixox.net/%e7%ab%8b%e5%bd%a2cnc%e6%97%8b%e7%9b%a4-v-series/#respond Tue, 13 Apr 2021 08:20:30 +0000 //ixox.net/?post_type=product&p=10450
  • メーカー: OKUMA
  • 型式: V40R, 2SP-V40, V100R
  • 中・大物の箱・異形のワーク加工に威力を発揮。箱形ベース・コラム採用により高信頼の高剛性構造。加工物が自重でチャック面に密着する安定加工?/li> ]]> Máy tiện CNC đứng OKUMA V series

    精度安定

    • 中・大物の箱・異形のワーク加工に威力を発?/li>
    • 箱形ベース・コラム採用により高信頼の高剛性構?/li>
    • 加工物が自重でチャック面に密着する安定加工

    高剛性構?/strong>

    • 剛性、減衰性の高い大形ベース上に、強固な箱形コラムを配しＸ、Ｚ軸共にワイドな角形すべり面を採用した高剛性、高信頼性構造?/li>
    • 送り速度の影響を受けないウェイト式カウンターバランスの採用で、低速から高速までスムーズな安定送りを実現?/li>

    刃物?/strong>

    • 大径12角タレットの採用でパーマネントセットを含めた容易なツーリングが可能?/li>
    • 大径カップリングによる高精度な割り出しと、強固な油圧クランプで強力重切削が可能?/li>

     
    Cấu trúc rất vững chắc Đài dao lớn

    自重でチャック面に密着 安定した加工を実?/strong>

    ワークがチャック基準面に自重で密着するため、安定してワークを把握できます。把握力によるワークの歪が抑えられるので、薄物ワークから大径・重量ワークまで、高精度で安定した加工が可能です?br /> また、クランプ治具を用いるような異形ワークの手動でのチャッキング時にもワークを支える必要がないので、着脱が容易です?/p>
    Máy tiện CNC đứng OKUMA V series

    強力加工

    • 広範囲定出力メインモータ採用
    • 熱変位、振動の影響を最小にするフランジ構造主軸台

    主軸

    • 主軸台はフランジ構造とし、剛性の高い箱形ベースに強固に固定。熱変位、振動の影響のミニマム化を実現?/li>
    • 主軸には高馬力広範囲定出力モータを採用。大径主軸と併せて、強力重切削が可能?/li>
    V40R/2SP-V40 V100R
    Spindle type A2-8 Flat ø380 (14.96)
    Outside diameter ø120 (4.72) ø200 (7.87)
    Inside diameter ø77 (3.03) ø110 (4.33)

    mm(in.)

    Máy tiện CNC đứng OKUMA V series

    高生産?/strong>

    • 工程結合で仕掛品ゼロ
    • 複合加工仕様で生産効率向?/li>

    2スピンドルシリーズ（2SP-V40?/strong>
    1?役の高生産?/strong>

    • 左右分離構造のため、他軸の加工振動の影響を受けず安定加工?/li>
    Máy tiện CNC đứng OKUMA V series Máy tiện CNC đứng OKUMA V series

    VIDEO 2SP-V40:

    機械仕様

    Item Unit V40R 2SP-V40 V100R
    Capacity Max turning diameter mm (in.) ø400 (15.75) ø1,000 (39.37)
    Max swing diameter mm (in.) ø500(19.69) ø1,250 (49.21)
    Max turning length mm (in.) 450 (17.72) 890 (35.04)
    Max chuck size mm (in.) ø450 (17.72) ø1,010 (39.76)
    Max workpiece weight*1 kg (lb) 300 (660)
    400 kg/800 min-1 *2    		 1,200 (2,640)
    2,000 kg/200 min-1 *2
    Travel X axis mm (in.) 265 (10.43) 565 (22.24)
    Z axis mm (in.) 450 (17.72) 890 (35.04)
    Spindle Speed min-1 25 to 2,500 13 to 1,250
    Speed ranges Infinitely variable 2 auto ranges
    (2 range motor coil switching)
    Type of nose A2-8 Flat ø380 (ø14.96)
    Front bearing dia mm (in.) ø120 (4.72) ø200 (7.87)
    Bore dia mm (in.) ø77 (3.03) ø110 (4.33)
    Floor to spindle nose mm (in.) 960 (37.80) 1,170 (46.06)
    Spindle support 2-point roller bearing
    Turret Turret type V12
    OD tool shank dimensions mm (in.) ?5 (1) ?2 (1-1/4)
    ID tool shank diameter mm (in.) ø40, ø50 (1.57, 1.97) ø40, ø50, ø63 (1.57, 1.97, 2.48)
    Feed Axis Rapid traverse X axis m/min (fpm) 24 (78.74)
    Rapid traverse Z axis m/min (fpm) 24 (78.74)
    Motor Spindle drive OSP kW (hp) 22/18.5 (30/25) (30 min/cont) 45/37 (60/50) (5 min/10 min)
    Spindle drive FANUC kW (hp) 22/18.5 (30/25) (30 min/cont) 45/37 (60/50) (10 min/15 min)
    Machine Size Required floor space (width × depth) mm (in.) 1,705 × 2,788 (67 × 110) 2,970 × 2,738 (116 × 108) 2,735 × 3,445 (107 × 135)
    Machine height mm (in.) 3,040 (119) OSP: 3,510 (138)
    FANUC: 3,565 (140)
    Machine weight kg (lb) 7,200 (15,840) 14,000 (30,800) 14,000 (30,800)
    CNC Control OSP-P300LA, FANUC 31i-B

    *1. With chuck

    *2. Maximum workpiece load and spindle speed when spindle speed is restricted

    ]]>     //ixox.net/%e7%ab%8b%e5%bd%a2cnc%e6%97%8b%e7%9b%a4-v-series/feed/ 0