OKUMA Multitasking Machines – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net Thu, 11 Jul 2024 02:36:52 +0000 en-US hourly 1 //wordpress.org/?v=5.7.12 //ixox.net/wp-content/uploads/2021/01/cropped-logo-32x32.png OKUMA Multitasking Machines – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net 32 32 OKUMA Multitasking Machines – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/intelligent-multitasking-machines-multus-u-series/ //ixox.net/intelligent-multitasking-machines-multus-u-series/#respond Sat, 27 Mar 2021 01:32:13 +0000 //ixox.net/?post_type=product&p=8498
  • Manufacturer: OKUMA
  • Model: MULTUS U3000, MULTUS U4000, MULTUS U5000
    • Flexible machining from all directions. Tough cutting in entire Y-axis range. With the ideal, large work envelope for lots of milling of complex parts. The class best Y-axis travel is fully utilized with a highly rigid traveling column, for powerful cutting along the entire Y axis.]]>     Máy gia công phức hợp thông minh OKUMA MULTUS U series

    Flexible machining from all directions

    Tough cutting in entire Y-axis range

    With the ideal, large work envelope for lots of milling of complex parts. The class best Y-axis travel is fully utilized with a highly rigid traveling column, for powerful cutting along the entire Y axis.

    Wide B-axis swing: 240°

    The wide 240-degree swing of the B axis spindle allows it to have equivalent machining areas for both the main and opposing spindle. With the NC-B axis, roller gears are used to achieve ??backlash during B-axis drive, and highly accurate 5-axis machining.
    Máy gia công phức hợp thông minh OKUMA MULTUS U series Máy gia công phức hợp thông minh OKUMA MULTUS U series

    Superb C-axis positioning accuracy: 0.0001°control

    As an option*, a highly accurate C-axis function is used for both the main and opposing spindles. This will support end-users requiring very accurate machining of component shapes that are quite complex.
    Moreover, heavy-duty milling, with a solid retention mechanism, makes possible applications that require both high accuracy and high efficiency.
    * Standard in certain markets.

    Maximum milling or turning performance

    Achieving highly efficient cutting of difficult-to-machine materials

    Hiệu qu?gia công cao nhất cho c?phay và tiện End milling
    604cm3/min(S45C)
    ø20-mm end mill 7-flute
    Cutting Speed:
    192m/min
    Cutting depth:
    6.5×20mm
    Feed rate:
    1.52mm/rev (MULTUS U3000)    		 OD Turning
    5.0mm2(S45C)
    Cutting Speed:
    150m/min
    Cutting depth:
    8mm
    Feed rate:
    0.625mm/rev
    (MULTUS U4000 / MULTUS U5000 ø160 spindle)

    An array of extended specs to match user workpiece applications

    Selections designed to match user workpiece applications

    29 diverse variations in all

    An assortment of variations are available for every possible requirement. You can choose the right solution that matches your application needs.

    Một loạt các thông s?k?thuật m?rộng đ?phù hợp với các kiểu phôi khác nhau

    Achieves process-intensive machining beyond the framework of multitasking machines

    Sloped axis turning
    Turn-Cut

    Turn-Cut is an original Okuma technology that enables turning on a milling spindle. The circular turning of the feed shaft and the spindle indexing angle are simultaneously controlled so that the tool edge is always facing the center of the milling spindle circular turning.

    Sloped axis turning can be done by sloping the B axis. Moreover, machining of any diameter can be done with a single tool. Inside and outside diameter machining that is larger than the maximum tool diameter can be done. In setting cutting conditions, the Turn-Cut Guide (Optional) advises the best turning speed when the diameter and roundness of the machining area are designated.

    Trục quay nghiêng Turn-Cut Trục quay nghiêng Turn-Cut

    High accuracy gear cutting with a multitasking machine
    Gear Machining Package (Optional)

    Gear cutting that previously required complex programming can now be done with ease. With easy programming, simply input the tool type, gear data, and cutting conditions to achieve highly accurate machining, reducing programming time to about one-tenth that of manual input. Process-intensive machining is achieved, including the gear cutting that used to be done on expensive special-purpose machines.
    (MULTUS U3000)

    Gear Machining Package Gear Machining Package Gear Machining Package
    Skiving (OD/ID splines) Hobbing Input screen

    VIDEO MULTUS U Series:

    VIDEO MULTUS U5000:

    Machine Specifications:

    Item MULTUS U3000
    1SC 1SW 2SC 2SW
    1000 1500 1000 1500 1000 1500 1000 1500
    Capacity Swing over saddle mm (in.) ø650 (25.59) Upper: ø650 (25.59), Lower: ø320 (12.60)
    Distance between centers mm (in.) 1,000 (39.37) 1,500 (59.06) 1,000 (39.37) 1,500 (59.06) 1,000 (39.37) 1,500 (59.06) 1,000 (39.37) 1,500 (59.06)
    Max machining dia mm (in.) ø650 (25.59) Upper: ø650 (25.59)*1, Lower: ø320 (12.60)
    Max machining length mm (in.) 1,000 (39.37) 1,500 (59.06) 1,000 (39.37) 1,500 (59.06) 1,000 (39.37) 1,500 (59.06) 1,000 (39.37) 1,500 (59.06)
    Travels X axis mm (in.) 645 (25.39) Upper: 645 (25.39), Lower: 235 (9.25)
    Z axis Upper: mm (in.) 1,100 (43.31) 1,600 (62.99) 1,100 (43.31) 1,600 (62.99) 1,100 (43.31) 1,600 (62.99) 1,100 (43.31) 1,600 (62.99)
    Lower: mm (in.) – 961 (37.83) 1,461 (57.52) 1,100 (43.31) 1,584 (62.36)
    Y axis mm (in.) 250 (9.84) (±125 (4.92))
    W axis mm (in.) – 1,325 (52.17) 1,594 (62.76) – 1,100 (43.31) 1,584 (62.36)
    B-axis / indexing angle degree -30 to 210 (min controlled angle 0.001)
    C-axis / indexing angle degree 360 (min controlled angle 0.0001)
    Spindle Speed min-1 50 to 5,000
    Speed ranges 2 auto ranges (2-speed motor coil switching)
    Nose shape JIS A2-6
    Taper bore mm (in.) ø80 (3.15)
    Bearing dia mm (in.) ø120 (4.72)
    Opposing spindle* Speed min-1 ?/span> 50 to 5,000 ?/span> 38 to 5,000
    Speed ranges ?/span> 2 auto ranges (2-speed motor coil switching) ?/span> 2 auto ranges (2-speed motor coil switching)
    Nose shape ?/span> JIS A2-6 ?/span> JIS A2-6
    Taper bore mm (in.) ?/span> ø80 (3.15) ?/span> ø62 (2.44)
    Bearing dia mm (in.) ?/span> ø120 (4.72) ?/span> ø100 (3.94)
    Turret
    (tool spindle)    		 Type H1 Upper: H1, Lower: V12
    No. of tools L / M: 1 Upper: L / M: 1, Lower: 12
    Tool shank dimensions mm (in.) ?5(1 × 1)
    ID tool shank diameter mm (in.) ø40 (1-1/2)
    Milling tool spindle min-1 Upper: 50 to 12,000
    Milling tool spindle speed ranges Upper: 2 auto ranges (2-speed motor coil switching)
    Feed rates X, Z, Y axes Upper: m/min X?0, Z?0, Y?0
    lower: m/min ?/span> X: 25, Z: 40
    W-axis m/min 20
    (tailstock)    		 12
    (tailstock)    		 30 20
    (tailstock)    		 12
    (tailstock)    		 30
    C, B axis min-1 C: 200, B: 30
    Tailstock Tapered bore MT No.5
    (revolving center)    		 – MT No.5
    (revolving center)    		 –
    Travel mm (in.) 1,186
    (46.69)    		 1,594
    (62.76)    		 – 961
    (37.83)    		 1,359.5
    (53.52)    		 –
    ATC Tool shank HSK-A63
    No. of tools tools 40
    Max tool dia mm (in.) ø90 (3.54) (w/o adjacent tools: ø130 (5.12))
    Max tool length mm (in.) 400 (15.75) (from gauge line)
    Max tool mass kg (lb) 10 (22)
    Motor Main spindle motor kW (hp) 22/15 (30/20) (30 min/cont)
    Opposing spindle motor kW (hp) ?/span> 22/15 (30/20)
    (30 min/cont)    		 ?/span> 22/15 (30/20)
    (20 min/cont)
    Milling tool spindle motor kW(hp) 25/19 (33/25) (3 min/cont)
    X-, Z-, Y-, B axis motors kW(hp) X: 5.2, Z: 4.6, Y: 3.5, B: 3.0
    (X: 6.9, Z: 6.1, Y: 4.7, B: 4.0)    		 XA: 5.2, ZA: 4.6, Y: 3.5, B: 3.0
    (XA: 6.9, ZA: 6.1, Y: 4.7, B: 4.0)
    XB: 3.5, ZB: 3.5 (XB: 4.7, ZB: 4.7) (DBC 1,000)/
    4.6 (6.1) (DBC 1,500)
    W-axis motor kW(hp) 2.8 (3.7) (tailstock) 3.5 (4.7) 4.6 (6.1) 2.8 (3.7) (tailstock) 3.5 (4.7) 4.6 (6.1)
    Coolant motor (50Hz/60Hz) kW(hp) 0.25/0.25 (0.33/0.33)×1 , 0.55/0.75(0.73/1.0)×3
    Machine size Height mm (in.) 2,955 (116.34) 3,030 (119.29)
    Floor space
    W × D
    (tank included)    		 mm × mm (in.) DBC 1,000: 4,925 × 2,995
    (193.90 × 117.91)
    DBC 1,500: 5,425 × 2,995
    (213.58 × 117.91)    		 DBC 1,000: 4,925 × 3,018
    (193.90 × 118.82)
    DBC 1,500: 5,425 × 3,082
    (213.58 × 121.34)
    Mass kg(lb) DBC 1,000: 15,500 (34,100)
    DBC 1,500: 16,500 (36,300)    		 DBC 1,000: 16,500 (36,300)
    DBC 1,500: 17,500 (38,500)
    CNC OSP-P300SA

    *1.ø320 (swing over lower turret) during shaft work and when machining with opposing spindles.
    *The opposing spindle capacity and working range near the opposing spindle differ with 1SW and 2SW specifications.

    Item MULTUS U4000
    1SC 1SW 2SC 2SW
    1500 2000 1500 2000 1500 2000 1500 2000
    Capacity Swing over saddle mm (in.) ø650 (25.59) Upper: ø650 (25.59), Lower: ø320 (12.60)
    Distance between centers mm (in.) 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)
    Max machining dia mm (in.) ø650 (25.59) Upper: ø650 (25.59)*1, Lower: ø320 (12.60)
    Max machining length mm (in.) 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)
    Travels X axis mm (in.) 695 (27.36) Upper: 695 (27.36), Lower: 235 (9.25)
    Z axis upper: mm (in.) 1,600
    (62.99)    		 2,100
    (82.68)    		 1,600
    (62.99)    		 2,100
    (82.68)    		 1,600
    (62.99)    		 2,100
    (82.68)    		 1,600
    (62.99)    		 2,100
    (82.68)
    lower: mm (in.) – 1,461
    (57.52)    		 1,961
    (77.20)    		 1,524*2
    (60.00)    		 2,045*3
    (80.51)
    Y axis mm (in.) 300 (11.81) (±150 (5.91))
    W axis mm (in.) – 1,554
    (61.18)    		 2,054
    (80.87)    		 – 1,524*2
    (60.00)    		 2,024*3
    (79.69)
    B-axis / indexing angle degree ?0 to +210 (min controlled angle 0.001)
    C-axis / indexing angle degree 360 (min controlled angle 0.0001)
    Spindle Speed min-1 45 to 4,200
    Speed ranges 2 auto ranges (2-speed motor coil switching)
    Nose shape JIS A2-8
    Taper bore mm (in.) ø91 (3.58)
    Bearing dia mm (in.) ø140 (5.51)
    Opposing spindle* Speed min-1 ?/span> 45 to 4,200 ?/span> 38 to 3,800
    Speed ranges ?/span> 2 auto ranges
    (2-speed motor coil switching)    		 ?/span> 2 auto ranges
    (2-speed motor coil switching)
    Nose shape ?/span> JIS A2-8 ?/span> JIS A2-8
    Taper bore mm (in.) ?/span> ø91 (3.58) ?/span> ø80 (3.15)
    Bearing dia mm (in.) ?/span> ø140 (5.51) ?/span> ø120 (4.72)
    Turret
    (tool spindle)    		 Type H1 H1, Lower: V12 Upper: H1, Lower: V12
    No. of tools L / M: 1 Upper: L / M: 1, Lower: 12
    Tool shank dimensions mm (in.) ?5 (1 × 1)
    ID tool shank diameter mm (in.) ø40 (1-1/2)
    Milling tool spindle min-1 Upper: 50 to 12,000
    Milling tool spindle speed ranges Upper: 2 auto ranges (2-speed motor coil switching)
    Feed rates X, Z, Y axes upper: m/min X: 50, Z: 50,Y: 40 X: 50, Z: 40,Y: 40 X: 50, Z: 50,Y: 40 X: 50, Z: 40,Y: 40 X: 50, Z: 50,Y: 40 X: 50, Z: 40,Y: 40 X: 50, Z: 50,Y: 40 X: 50, Z: 40,Y: 40
    lower: m/min ?/span> X: 25, Z: 40 X: 25, Z: 30 X: 25, Z: 40 X: 25, Z: 30
    W-axis m/min 12
    (tailstock)    		 30 20 12
    (tailstock)    		 30 20
    C, B axes min-1 C: 200, B: 30
    Tailstock Tapered bore MT No. 5
    (revolving center)    		 – MT No. 5
    (revolving center)    		 –
    Travel mm (in.) 1,594
    (62.76)    		 2,094
    (82.44)    		 – 1,359.5
    (53.52)    		 1,961
    (77.20)    		 –
    ATC Tool shank HSK-A63
    No. of tools tools 40
    Max tool dia mm (in.) ø90 (3.54) (w/o adjacent tools: ø130 (5.12))
    Max tool length mm (in.) 400 (15.75) (from gauge line)
    Max tool mass kg (lb) 10 (22)
    Motor Main spindle motor kW (hp) 22/15 (30/20) (30 min/cont)
    Opposing spindle motor kW (hp) ?/span> 22/15 (30/20)
    (30 min/cont)    		 ?/span> 22/15 (30/20)
    (20 min/cont)
    Milling tool spindle motor kW (hp) 25/19 (33/25) (3 min/cont)
    X-, Z-, Y-, B-axis motors kW (hp) X: 5.2, Z: 4.6 (X: 6.9, Z: 6.1) (DBC 1,500)/
    5.2 (6.9) (DBC 2,000),Y: 3.5 (4.7), B: 3.0 (4.0)    		 XA: 5.2, ZA: 4.6 (DBC 1,500), /5.2 (DBC 2,000)
    (XA: 6.9, ZA: 6.1 (DBC 1,500), /6.9 (DBC 2,000))
    XB: 3.5, ZB: 4.6, Y: 3.5, B: 3.0
    (XB: 4.7, ZB: 6.1, Y: 4.7, B: 4.0)
    W-axis motor kW (hp) 2.8 (3.7) (tailstock) 4.6 (6.1) 2.8 (3.7) (tailstock) 4.6 (6.1)
    Coolant motor (50Hz/60Hz) kW (hp) 0.25/0.25 (0.33/0.33)×1, 0.55/0.75 (0.73/1.0)×3
    Machine size Height mm (in.) 2,955 (116.34) 3,030 (119.29)
    Floor space
    W × D
    (tank included)    		 mm × mm (in.) DBC 1,500: 5,425 × 2,995
    (213.58 × 117.91)
    DBC 2,000: 6,175 × 2,995
    (243.11 × 117.91)    		 DBC 1,500: 5,425 × 3,082
    (213.58 × 121.34)
    DBC 2,000: 6,175 × 3,082
    (243.11 × 121.34)
    Mass kg (lb) DBC 1,500: 17,000 (37,400)
    DBC 2,000: 19,000 (41,800)    		 DBC 1,500: 18,000 (39,600)
    DBC 2,000: 20,000 (44,000)
    CNC OSP-P300SA

    *1.ø320 (swing over lower turret) during shaft work and when machining with opposing spindles.
    *2.In the main Big-Bore spindle, it will be 1,500.
    *3.In the main Big-Bore spindle, it will be 2,000.
    *The opposing spindle capacity and working range near the opposing spindle differ with 1SW and 2SW specifications.

    Item MULTUS U5000
    1SC 1SW 2SC 2SW
    1500 2000 1500 2000 1500 2000 1500 2000
    Capacity Swing over saddle mm (in.) ø650 (25.59) Upper: ø650 (25.59), Lower: ø320 (12.60)
    Distance between centers mm (in.) 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)
    Max machining dia mm (in.) ø650 (25.59) Upper: ø650 (25.59)*1, Lower: ø320 (12.60)
    Max machining length mm (in.) 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)    		 1,500
    (59.06)    		 2,000
    (78.74)
    Travels X axis mm (in.) 695 (27.36) Upper: 695 (27.36), Lower: 235 (9.25)
    Z axis upper:mm (in.) 1,600
    (62.99)    		 2,100
    (82.68)    		 1,600
    (62.99)    		 2,100
    (82.68)    		 1,600
    (62.99)    		 2,100
    (82.68)    		 1,600
    (62.99)    		 2,100
    (82.68)
    lower:mm (in.) – 1,461
    (57.52)    		 1,961
    (77.20)    		 1,524
    (60.00)    		 2,024
    (79.69)
    Y axis mm (in.) 300 (11.81) (±150 (5.91))
    W axis mm (in.) – 1,554
    (61.18)    		 2,054
    (80.87)    		 – 1,500
    (59.06)    		 2,000
    (78.74)
    B-axis / indexing angle degree -30 to +210 (min controlled angle 0.001)
    C-axis / indexing angle degree 360 (min controlled angle 0.0001)
    Spindle Speed min-1 30 to 3,000
    Speed ranges 2 auto ranges (2-speed motor coil switching)
    Nose shape JIS A2-11
    Taper bore mm (in.) ø112 (4.41)
    Bearing dia mm (in.) ø160 (6.30)
    Opposing spindle* Speed min-1 ?/span> 30 to 3,000 ?/span> 38 to 3,800
    Speed ranges ?/span> 2 auto ranges
    (2-speed motor coil switching)    		 ?/span> 2 auto ranges
    (2-speed motor coil switching)
    Nose shape ?/span> JIS A2-11 ?/span> JIS A2-8
    Taper bore mm (in.) ?/span> ø112 (4.41) ?/span> ø80 (3.15)
    Bearing dia mm (in.) ?/span> ø160 (6.30) ?/span> ø120 (4.72)
    Turret
    (tool spindle)    		 Type H1 H1, Lower: V12
    No. of tools L / M: 1 Upper: L / M: 1, Lower: 12
    Tool shank dimensions mm (in.) ?5 (1 × 1)
    ID tool shank diameter mm (in.) ø40 (1-1/2)
    Milling tool spindle min-1 Upper: 50 to 12,000
    Milling tool spindle speed ranges Upper: 2 auto ranges (2-speed motor coil switching)
    Feed rates X, Z, Y axes upper: m/min X: 50, Z: 50, Y: 40 X: 50, Z: 40, Y: 40 X: 50, Z: 50, Y: 40 X: 50, Z: 40, Y: 40 X: 50, Z: 50, Y: 40 X: 50, Z: 40, Y: 40 X: 50, Z: 50, Y: 40 X: 50, Z: 40, Y: 40
    lower: m/min ?/span> X: 25, Z: 40 X: 25, Z: 30 X: 25, Z: 40 X: 25, Z: 30
    W-axis m/min 8 (tailstock) 30 20 8 (tailstock) 30 20
    C, B axes min-1 C: 200, B: 30
    Tailstock Tapered bore MT No. 5 (Built-in) – MT No. 5 (Built-in) –
    Travel mm (in.) 1,554
    (61.18)    		 2,054
    (80.87)    		 – 1,359.5
    (53.52)    		 1,961
    (77.20)    		 –
    ATC Tool shank HSK-A63
    No. of tools tools 40
    Max tool dia mm (in.) ø90 (3.54) (w/o adjacent tools: ø130 (5.12))
    Max tool length mm (in.) 400 (15.75) (from gauge line)
    Max tool mass kg (lb) 10 (22)
    Motor Main spindle motor kW (hp) 37/30 (49/40) (30 min/cont)
    Opposing spindle motor kW (hp) ?/span> 32/22 (42/30)
    (20 min/cont)    		 ?/span> 22/15/11 (30/20/15)
    (20 min/cont)
    Milling tool spindle motor kW (hp) 25/19 (33/25) (3 min/cont)
    X-, Z-, Y-, B-axis motors kW (hp) X: 5.2, Z: 4.6 (DBC 1,500) /5.2 (DBC 2,000)
    (X: 6.9, Z: 6.1 (DBC 1,500) /6.9 (DBC 2,000))
    Y: 3.5, B: 3.0
    (Y: 4.7, B: 4.0)    		 XA: 5.2, ZA: 4.6 (DBC 1,500), /5.2 (DBC 2,000)
    (XA: 6.9, ZA: 6.1 (DBC 1,500), /6.9 (DBC 2,000))
    XB: 3.5, ZB: 4.6, Y: 3.5, B: 3.0
    (XB: 4.7, ZB: 6.1, Y: 4.7, B: 4.0)
    W-axis motor kW (hp) 2.8 (3.7) (tailstock) 4.6 (6.1) 2.8 (3.7) (tailstock) 4.6 (6.1)
    Coolant motor (50Hz/60Hz) kW(hp) 0.25/0.25 (0.33/0.33) × 1, 0.55/0.75 (0.73/1.0) ×3
    Machine size Height mm (in.) 2,955 (116.34) 3,030 (119.29)
    Floor space
    W × D
    (tank included)    		 mm × mm (in.) DBC 1,500: 5,530 × 2,995
    (217.72 × 117.91)
    DBC 2,000: 6,280 × 2,995
    (247.24 × 117.91)    		 DBC 1,500: 5,530 × 3,082
    (217.72 × 121.34)
    DBC 2,000: 6,280 × 3,082
    (247.24 × 121.34)
    Mass kg (lb) DBC 1,500: 17,300 (38,060)
    DBC 2,000: 19,300 (42,460)    		 DBC 1,500: 18,300 (40,260)
    DBC 2,000: 20,300 (44,660)
    CNC OSP-P300SA

    *1.ø320 (swing over lower turret) during shaft work and when machining with opposing spindles.
    *The opposing spindle capacity and working range near the opposing spindle differ with 1SW and 2SW specifications.

    ]]>     //ixox.net/intelligent-multitasking-machines-multus-u-series/feed/ 0     OKUMA Multitasking Machines – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/intelligent-multitasking-machines-multus-b%e2%85%b1-series/ //ixox.net/intelligent-multitasking-machines-multus-b%e2%85%b1-series/#respond Sat, 27 Mar 2021 01:16:40 +0000 //ixox.net/?post_type=product&p=8497
  • Manufacturer: OKUMA
  • Model: MULTUS B200? MULTUS B250? MULTUS B300? MULTUS B400?/li> Multitasking is easier than ever. Lathe, vertical or horizontal machining center, and material handling operations consolidated into one machine...]]> Máy gia công phức hợp OKUMA MULTUS B?series

    Multitasking is easier than ever!

    Lathe, vertical or horizontal machining center, and material handling operations consolidated into one machine…

    Shorter deliveries and more effective use of floor space, plus fewer setups and operation with fewer workers, result in better process control and greatly reduced total cost.

    Máy gia công phức hợp OKUMA MULTUS B?series

    Máy gia công phức hợp OKUMA MULTUS B?series Máy gia công phức hợp OKUMA MULTUS B?series Máy gia công phức hợp OKUMA MULTUS B?series

    Both high machining capacity and large machining area on a compact machine

    Large work envelope

    Y-axis travel
    MULTUS B200Ⅱ：160mm / MULTUS B250Ⅱ：200mm / MULTUS B300Ⅱ：160mm / MULTUS B400Ⅱ：230mm
    ?/span>

    Máy gia công phức hợp OKUMA MULTUS B?series Máy gia công phức hợp OKUMA MULTUS B?series

    Highly rigid bed and guideways

    • Stable machining achieved with wide, rigid bed.
    • Featuring X-Y-Z-axis roller guides designed with high rigidity, antiwear, and vibration damping.
      Roller guide rigidity 2.6 to 3.0 times that of ball guide.

    Bàn máy và thanh dẫn có đ?cứng vững cao

    Powerful, compact turret

    • Compactness and high output with PREX motor
    • Highly rigid roller bearings for live tool spindle (front bearings)
      (for MULTUS B300?/ B400?

    Motor output

    MULTUS B200?
    MULTUS B250?/td>     		12,000min-1?2kW
    20,000min-1?kW*
    MULTUS B300?/td> 6,000min-1?1kW
    10,000min-1?6kW
    MULTUS B400?/td> 6,000min-1?4kW
    10,000min-1?0kW

    *HSK-A63

    Spec extensions to handle all kinds of workpieces

    Abundant spec extensions

    Thông s?k?thuật m?rộng đ?đáp ứng gia công tất c?các loại phôi

    High accuracy gear machining with a multitasking machine
    Gear Machining Package (Optional)

    Gear machining that previously required complex programming can now be done with ease. With GMP, simply input the tool type, gear data, and cutting conditions. Programming time is reduced to about one-tenth that of manual input. Process-intensive machining is achieved, including the gear machining that used to be done on expensive special-purpose machines.

    Gear Machining Package

    Video MULTUS BII Series:

    » Download Catalog MULTUS B200?/a>

    » Download Catalog MULTUS B400?/a>

    Video (MULTUS B250?:

    » Download Catalog MULTUS B250?/a>

    Video (MULTUS B250?:

    » Download Catalog MULTUS B300?/a>

    ]]>     //ixox.net/intelligent-multitasking-machines-multus-b%e2%85%b1-series/feed/ 0 OKUMA Multitasking Machines – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/5-axis-vertical-multitasking-machines-vtm-1200yb-vtm-2000yb/ //ixox.net/5-axis-vertical-multitasking-machines-vtm-1200yb-vtm-2000yb/#respond Sat, 27 Mar 2021 01:08:08 +0000 //ixox.net/?post_type=product&p=8496
  • Manufacturer: OKUMA
  • Model: VTM-1200VB, VTM-2000YB
  • Superior machine structure delivers high performance. Highly rigid structure that gives stable accuracies. Integrated structure column resists twisting and bending.
    • ]]>     Máy gia công phức hợp 5 trục dọc OKUMA VTM-1200YB / VTM-2000YB

    Superior machine structure delivers high performance

    Máy gia công phức hợp 5 trục dọc OKUMA VTM-1200YB / VTM-2000YB

    Highly rigid structure that gives stable accuracies

    1. Integrated structure column resists twisting and bending

    2. Fixed headstock for high rigidity

    • Spindle structure also handles unbalanced workpieces
    • Spindle bearing:
      VTM-1200YB ø260
      VTM-2000YB ø200 + thrust bearing ø650
    • Loading mass:
      VTM-1200YB 3,000 kg (chuck included)
      Optional 5,000 kg
      VTM-2000YB 10,000 kg (chuck not included)

    High speed operation:

    • Faster axis feeds 32 m/min (X-Y-Z axes)
    • Shorter ATC time (C-C) 12.5 sec
    • Shorter B axis indexing 2.4 sec/90°

    Máy gia công phức hợp 5 trục dọc OKUMA VTM-1200YB / VTM-2000YB

    High machining capacity even with difficult-to-cut materials

    Turning [VTM-2000YB actual data] Heavy-duty cutting: 6.5 mm2
    (Workpiece: S45C)

    Kh?năng gia công cao ngay c?với các vật liệu khó cắt

    Milling [VTM-2000YB actual data] Face milling Stock removal: 1,000 cm3/min
    (Workpiece: S45C, Tool: ø100 mm face mill 10-flute)

    Kh?năng gia công cao ngay c?với các vật liệu khó cắt

    Highly accurate control

    Circular cutting (X-Y planes)

    Roundness:2.1 μm (actual data)
    Material: Al
    Machining dia: ø115
    Machining width: 25 mm
    Tool: Carbide end mill ø13 mm (4-flute)
    Cutting: 326 m/min(8,000 min-1)
    Feedrate: 1,000 mm/min(0.03125 mm/flute)

    Cắt tròn (mặt phẳng XY)

    B-axis control

    Standard: 0.001° indexing
    Optional: NC-B axis (simultaneous 5-axis control)

    Simultaneous 5-axis machining: B-axis NC control (optional)

    〈Process-intensive machining of large spiral bevel gears?/p>

    Process-intensive machining on one multitasking machine of processes normally done on three different machine types, including expensive special purpose machines. Not only are equipment costs and installation space greatly reduced; lead times are also a significantly shortened.

    High-accuracy machining is achieved with simultaneous 5-axis control (B-axis NC) and a highly accurate C axis.

    Gia công 5 trục đồng thời: Điều khiển NC trục B (tùy chọn)

    Gia công 5 trục đồng thời: Điều khiển NC trục B (tùy chọn)

    VIDEO VTM-1200YB:

    Machine Specifications:

    Item Unit VTM-1200YB VTM-2000YB
    Capacity Maximum chuck size mm (in.) ø1,250 (49.21) ø2,000 (78.74)
    Max machining diameter mm (in.) ø1,200 (47.24) ø2,000 (78.74)
    Max swing diameter mm (in.) ø1,500 (59.06) ø2,400 (94.49)
    Max turning length
    (height)    		 mm (in.) 1,080 (42.52) 1,400 (55.12)
    Max workpiece load kg (lb) 3,000 [5,000] [with chuck] (6,600 [11,000]) 10,000 (22,000)
    Travel X-axis travel mm (in.) 1,270 (50) 1,600 (62.99)
    Y-axis travel mm (in.) 1,000 (-500 to +500) [1,240 (-620 to +620)]
    (39.37 (-19.69 to +19.69) [-24.4 to +24.41])    		 1,600 (-800 to +800)
    (62.99 (-31.50 to +31.50))
    Z-axis travel mm (in.) 1,080 [1,530] (42.52 [60.24]) 1,400 (55.12)
    C-axis travel deg 360 (minimum control angle 0.001)
    B-axis travel deg 150 (-30 to +120) (minimum control angle 0.001)
    Turning spindle Spindle speed min-1 5 to 500 [4 to 400] 4 to 300 [4 to 200]
    Spindle speed ranges 2 auto ranges
    Max spindle torque N-m 6,093/4,062 (20 min/cont) 8,415/5,610 (20 min/cont)
    Spindle nose type mm (in.) ø380 (14.96) flat ø1,400 [2,000] (55.12 [78.74]) table
    Spindle bearing ID mm (in.) ø260 (10.24) ø650/ø200 (25.59/7.87)
    Through-hole diameter mm (in.) ø160 (6.30) ø110 (4.33)
    Turret
    (tool spindle)    		 Turret type H1, ATC
    Number of tools mounted in turret 1 (L/M)
    Tool shank/
    boring bar shank diameter    		 mm (in.) ?5 (0.98), ?2 (1.26) / ø40 (1.57), ø50 (1.97)
    Milling tool spindle Maximum spindle speed min-1 40 to 10,000
    Max spindle torque N-m 505 / 300 / 205 (3 min / 30 min / cont)
    Spindle bore dia mm (in.) ø90 (3.54)
    ATC Tool Shank / Pull stud MAS BT50 [CAPTO C8, HSK-A100]
    Max tools
    (magazine capacity)    		 tool 36 [60, 120*1] 36 [60, 120]
    Max tool diameter mm (in.) w/o adjacent tool : ø290 (11.42) [ø250 (9.84)*2], with adjacent tool : ø170 (6.69)
    Max tool length
    (from gauge line)    		 mm (in.) 500 [600] (19.69 [0.78])*3 500 [600] (19.69 [0.78])
    Max tool mass kg (lb) 30 [40] (66 [88])*3 30 [40] (66 [88])
    Feed axis Feedrate command range mm/rev 0.001 to 1,000.000
    Rapid feedrate m/min X/Y/Z: 32 (105)
    min-1 B: 19.5, C: 20
    Motor Motor spindle kW (hp) OSP : 30 / 22 (40 / 30) (30 min / cont), FANUC : 30 / 22 (40 / 30) (30 min / cont)
    Milling tool spindle motor kW (hp) OSP : 37 / 30 / 22 (50 / 40 / 30) (3 min / 30 min / cont),
    FANUC : 37 / 30 / 22 (50 / 40 / 30) (3 min / 30 min / cont)
    Axis drive motors kW (hp) OSP : X: 5.2 (6.9), Y: 4.6 (6.1), Z: 4.6 (6.1) × 2
    FANUC : X: 5.0 (6.7), Y: 5.5 (7.5), Z: 5.5 (7.5) × 2    		 X : 4.6 (6.1) ×2, Y : 4.6 (6.1), Z: 5.2 (6.92 ) × 2
    B-axis drive motors kW (hp) OSP: 4.6 (6.1), FANUC: 5.5 (7.5)
    Machine size Required floor space
    (L × W)    		 mm (in.) 4,273 (168.23) [4,990 (196.46)] 4,967 (195.55)
    Height mm (in.) 5,512 × 5,471 (217.01 × 215.39) 5,970 × 6,973 (235.04 × 274.53)
    Weight kg (lb) 28,000 (61,600) [29,500 (64,900)]*4 43,000 (94,600)*4
    Control OSP-P300SA, FANUC 31i-B

    [ ] : Options

    *1: With 120 tool magazine (matrix) specifications, maximum tool length becomes 600 mm × mass 40 kg

    *2: With 120 tool magazine

    *3: With maximum tool length 600 mm × mass 40 kg specifications, the machine has high column specifications

    *4: Machine only (includes ATC magazine mass)

    ]]>     //ixox.net/5-axis-vertical-multitasking-machines-vtm-1200yb-vtm-2000yb/feed/ 0     OKUMA Multitasking Machines – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/intelligent-multitasking-machines-multus-b-series/ //ixox.net/intelligent-multitasking-machines-multus-b-series/#respond Sat, 27 Mar 2021 00:59:59 +0000 //ixox.net/?post_type=product&p=8495
  • Manufacturer: OKUMA
  • Model: MULTUS B550, MULTUS B750
  • Full process-intensive machining of large-diameter, long workpieces
  • » Download Catalog model MULTUS B550
  • » Download Catalog modelMULTUS B750
    • ]]> Máy gia công phức hợp OKUMA MULTUS B series

    Video (MULTUS B550):

    Video (MULTUS B750):

    ]]>     //ixox.net/intelligent-multitasking-machines-multus-b-series/feed/ 0 OKUMA Multitasking Machines – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/large-vertical-multitasking-machines-vtm-series/ //ixox.net/large-vertical-multitasking-machines-vtm-series/#respond Sat, 27 Mar 2021 00:55:12 +0000 //ixox.net/?post_type=product&p=8494
  • Manufacturer: OKUMA
  • Model: VTM-65, VTM-100, VTM-200
    •  ]]>     Máy gia công phức hợp đứng c?lớn OKUMA VTM series

    Machine Specifications:

    Item Unit VTM-65 VTM-100 VTM-200
    Capacity Max swing diameter mm (in) ø750 (29.53) ø1,000 (39.37) ø2,400 (94.49)
    Max machining diameter mm (in) ø650 (25.59) ø1,000 (39.37) ø2,000 (78.74)
    Max machining length mm (in) 635 (25) 840 (33.07) 1,200 (47.24)
    Max workpiece load
    (including chuck)    		 kg (lb) 800 (1,760)
    [2,000 kg/200 min-1]*1    		 1,200 (2,640)
    [2,000 kg/200 min-1]*1    		 7,000 (15,400)
    [8,500 kg/65 min-1]*1
    Travels X axis mm (in) 500 (19.69) 650 (25.59) 1,600 (62.99)
    Z axis mm (in) 635 (25) 840 (33.07) 1,200 (47.24)
    C axis deg 360 (minimum control angle: 0.001)
    Work Spindle Speed min-1 10 to 1,250 6 to 1,250 5 to 200
    Speed ranges OSP: infinitely variable
    FANUC: 2 auto
    (2-spd mtr coil sw)    		 2 auto ranges (2-speed motor coil switching)
    Type of spindle nose JIS A2-11 ø380 flat
    Front bearing ID mm (in) ø200 (7.87) ø260 (10.24)
    Through-hole diameter mm (in) ø110 (4.33) ø160 (6.30)
    Floor to spindle nose mm (in) 1,105 (43.50) 1,150 (45.28) 1,240 (48.82)
    Spindle support 2-point roller bearing spindle support
    Turret
    (tool spindle)    		 Turret type ATC single tool
    Standard tool mm (in) ?5, ?2 (1, 1-1/4)
    Boring bar diameter mm (in) ø40, ø50 (ø1-1/2, ø2)
    Milling Tool Spindle Maximum spindle speed min-1 OSP: 20 to 4,500
    FANUC: 10 to 4,500
    Speed ranges 2 auto ranges (2-speed motor coil switching)
    Shape, tapered bore BT50 [BIG-PLUS®]
    Front diameter mm (in) ø90 (3.54)
    Tool Change Tool shank BT50
    Pull stud MAS ?/span>
    Max tools (magazine capacity) tool 36 [60]
    Tool selection Fixed adress type
    Max tool diameter mm (in) ø170 (ø6.70) [w/o adjacent ø250 (ø69.85): 500 L (19.69), ø300 (11.82): 450 L (17.72)]
    Max length (from gauge line) mm (in) 500 (19.69) [Touch Setter gauging length: max 360 (14.18)] 500 (19.69)
    Max tool mass kg 30 (average 20)
    Feed Axes Rapid feedrate X axis m/min (fpm) 18 (59.06) 16 (52.50)
    Rapid feedrate Z axis m/min (fpm) 20 (65.62) 16 (52.50)
    Rapid feedrate C axis min-1 20 10
    Motors Work spindle motor kW (hp) OSP: 30/22 (40/30) (30 min/cont)
    FANUC: 30/22 (40/30) (30 min/cont)
    Milling tool motor kW (hp) OSP: 15/11 (20/15) (15 min/cont)
    FANUC: 7.5/5.5 (10/7.5) (15 min/cont)
    Machine size Height mm (in) 4,100 (161.42) 4,300 (169.29) 4,603 (181.22)
    Floor space
    (L × W)    		 mm (in) OSP: 4,066 × 2,990
    (160.08 × 117.72)
    FANUC: 4,066 × 3,030
    (160.08 × 119.29)    		 OSP: 4,286 × 3,175
    (168.74 × 125.00)
    FANUC: 4,286 × 3,205
    (168.74 × 126.18)    		 OSP: 5,561 × 5,258
    (218.94 × 207.01)
    FANUC: 5,561 × 5,288
    (218.94 × 208.19)
    Mass kg (lb) 11,000 (24,200)*2 OSP: 13,700 (30,140)*2
    FANUC: 13,500 (29,700)*2    		 27,000 (59,400)*2
    CNC Control OSP-P300SA, FANUC 31i-B

    [ ]: Optional

    *1. Max workpiece mass at the indicated spindle speed limit.

    *2. Machine only; without ATC magazine.

    ]]>     //ixox.net/large-vertical-multitasking-machines-vtm-series/feed/ 0     OKUMA Multitasking Machines – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/double-column-multitasking-machines-vtr-a-series/ //ixox.net/double-column-multitasking-machines-vtr-a-series/#respond Sat, 27 Mar 2021 00:52:43 +0000 //ixox.net/?post_type=product&p=8493
  • Manufacturer: OKUMA
  • Model: VTR-160A, VTR-350A
    •  ]]>     Máy gia công phức hợp cột đôi OKUMA VTR-A series

    Machine Specifications:

    Model Unit VTR-160A VTR-350A
    Capacity Max swing mm (in.) ø1,600 (62.99) ø3,500 (137.79)
    Max turning length (height) mm (in.) 1,250 [1,600] (49.21 [62.99]) 1,600 [2,000, 2,400] (62.99 [78.74, 94.49])
    Max table load kg (lb) 10,000 (22,000) 20,000 (44,000)
    Floor to table top (standard table) mm (in.) 900 (35.43) 1,190 (46.85)
    Table diameter mm (in.) ø1,250 (ø49.21) ø3,000 (ø118.11)
    Travel X-axis*1 mm (in.) 1,130 [1,840*2] (44.49 [72.44]) + 600 (23.62) 2,100 [3,850*2] (82.68 [151.57]) + 680 (26.77)
    Z-axis mm (in.) 900 [1,250] (35.43 [49.21]) 1250 [1,500] (49.21 [59.06])
    W-axis mm (in.) 600 [800] (23.62 [31.49]) 800 [1,000, 1,200]*3
    C-axis deg 360 (minimum control angle: 0.001)
    Table top to milling tool spindle nose mm (in.) 0 to 1,455 [0 to 1,805]
    (0 to 57.28 [0 to 71.06])    		 0 to 1,820 [0 to 2,220, 0 to 2,620]
    (0 to 71.65 [0 to 87.40, 0 to 103.15])
    Table (turning spindle) Speed min-1 1 to 400 1 to 160
    Speed ranges Auto 2 speeds
    Torque (30 min/cont) N·m 17,100/14,000
    [28,500/22,800]    		 42,500/34,800
    [58,000/46,400]
    Milling tool spindle Speed min-1 30 to 3,000 [45 to 4,500]
    Speed ranges Stepless
    Torque N·m (ft-lbf) 230/190 (169/140) (30 min/cont) [380/300/250 (279/221/184) (3 min/10 min/cont)]
    Tool shank BT50 [BIG-PLUS®]
    Pull stud MAS2
    Tools Turning tool mm ?2
    Magazine capacity tool 23 [35, 59] (0.91 [1.38, 2.32]) + 1 protective ring
    Feed axis Rapid traverse (X & Z) m/min (ipm) X: 20 [15*4] (65.62 [49.22]), Z: 20 (65.62)
    Rapid traverse (C) min-1 5 2
    Rapid traverse (W) N (kgf·m) 0.4 1
    Motors Table motor (30 min/cont) kW (hp) 45/37 [75/60] 55/45
    Milling tool kW (hp) 18.5/15 (25/20) (30 min/cont) [30/24/20 (40/32/27) (3 min/10 min/cont)]
    Machine size Height mm (in.) 5,000 [6,000] (196.85 [236.22]) 6,300 [6,500, 7,250] (248.03 [255.91, 285.43])
    Required floor space mm (in.) 6,550 × 3,693 (257 x 145) 8,615 × 5,374 (339 x 211)
    Weight kg (lb) 22,000 (48,400) 43,000 (94,600)
    Max cutting force N (kgf·m) 30,000 (3,061)
    Standard power capacity kVA 80 95
    Standard air flow L/min 700
    CNC OSP-P300SA

    [ ]: Optional

    *1: For machining + ATC

    *2: Travel with in-process work gauging (diameter measuring) specifications

    *3: With 36-tool magazine specifications: 650 [875, 1,050] (partial restrictions on W axis travel)

    *4: Rapid traverse on X axis limited to 15 m/min during in-process gauging, diameter measuring specifications

    VIDEO (VTR-160A):

    VIDEO (VTR-350A):

    ]]>     //ixox.net/double-column-multitasking-machines-vtr-a-series/feed/ 0