Feature

Side cutter with excellent cutting edge sharpness realizes low resistance and low vibration milling

Side Cutter Suitable For A Variety Of Applications

Standard design	Multi-stepped design

Made-to-order bodies possible with cutting width of 17mm and up

Suitable for various applications such as groove milling and shoulder milling

Realises Low Resistance and Low Vibration Milling

Design emphasizes cutting edge sharpness with +10° inclination angle
Excellent cutting edge sharpness suppresses chatter to enable stable machining

Inclination Angle	True Rake Angle

Neutral-handed 4-cornered Insert

Easy management with neutral-handed insert design that eliminates the need to align right-hand and left-hand inserts

Complex arc-shaped cutting edge achieves a smaller cutting angle and a larger depth of cut simultaneously.High-efficiency machining at maximum feed rate per tooth of 3.5mm/t is possible.

Economical double-sided insert with 6-corner specification. Reassuringly thick at 7mm.

Even at high feedrates of 2.0mm/t or more, a reasonable surface finish can be attained without a wiper insert.

With a combination of optimised cutting edge shape and high-precision molding technology, superb wall surface accuracy and surface finish quality are achieved.

• Supports Various Machining Operations

Applicable to various machining applications, the cutter lineup includes diameters of ø14 to ø160mm, enabling large ramping.

• Excellent Machining Quality

With a combination of optimised cutting edge shape and high-precision molding technology, superb wall surface accuracy and surface finish quality are achieved.

• Excellent Sharpness with Low Resistance

Reduces machining noise and suppresses burrs. Lineup includes ground inserts with a focus on sharpness.

• General-purpose Grade Applicable to Any Work Material

Introducing the new grade ACU2500, supporting machining in a wide range of fields and applicable to steel, stainless steel, and cast iron.

• Applicable to Various Applications

VIDEO

Tough cutter for high-efficiency machining of stainless steel and exotic alloy

�?High-efficiency, high-rigidity radius cutter

Wide insert seat face design achieves excellent durability, for high efficiency machining of stainless steel etc. and is ideal for roughing of aerospace components such as turbine blades.

�?Lineup of ground type and M class inserts

In addition to the 4-cornered Ground type inserts, economical 8-cornered M Class inserts are also available.

Cutter body can be shared by optimizing the locating surface design

�?Uses new grades for exotic alloy machining

Utilizing newly developed ACS2500/ACS3000 grades to achieve stable and long tool life in machining exotic alloys, such as titanium alloys and Ni-based heat-resistant alloys, as well as stainless steel.

Achieves High-speed and High-efficiency Aluminum Alloys machining

• Lightweight Aluminum Alloy Body

Utilizing aluminum alloy to achieve a total weight of less than 1.3kg for a ø125mm cutter with 22 teeth.

• Drastically Reduced Runout Adjustment Time

Simple screw-fastening structure enables fine adjustments to be made easily

• Through-Tool Coolant

Secures a supply of coolant to the cutting edge and breaks chips thoroughly.

VIDEO

Excellent machined surface quality and superior toughness thanks to high precision tangential inserts.

• Superior Machined Surface Quality

High accuracy and a superior machined surface quality are achieved by the use of ground inserts.

• A Blade Design with Both High Cutting Edge Strength and Sharpness

Both high cutting edge strength and sharpness are possible due to the use of tangential inserts and optimized cutting edge shape.

• A Wide Range of Products

On top of the 2 types of insert size and 3 types of chipbreaker, there is also a wide range of grades available for use in a variety of machining applications.

VIDEO

Economical double-sided insert Unique and precise insert design provides high efficiency and high accuracy milling

SEC-Sumi Dual Mill DFC type is a general purpose, high efficiency face milling cutter which uses an unique shaped insert that delivers both cutting edge sharpness and strength,to cover a wide range of applications from high efficiency to finish milling operations.

It is avairable both facing and shoulder milling due to GS type chipbreaker has been added.

• Unique insert shape delivers both cutting edge sharpness and strength.
• Insert indexing accuracy of the DFC type is not affected as flank wear does not move pass the support face.

Suitable for face milling and shoulder milling with a 90° cutting edge angle.

VIDEO

Unique chipbreaker design to provide lower resistance and higher quality surface finish than conventional tools

Reduced cutting resistance

High-rake chipbreaker designed for WGX type provides low cutting resistance.

High quality

1. Improved run-out precision and unique wiper edge shape ensure excellent surface finish.
2. Additional chamfer reduces burrs and edge chipping.

Utilizing new coated grade

1. High precision technology helps minimize inconsistent cutter run-out while a new coating provides stable long life.
2. Grade expansion with ACM200 and ACM300 for machining hard-to-cut materials, to cover a wider application range.

VIDEO

Optimized insert shape for shoulder milling combined with a high precision body achieves superior machined surface finish

Screw lock type cutter using 4-cornered inserts with ideal cutting edge design that delivers good squareness

The WFX08000 series has also been added (max. depth of cut:6.0mm) for small-depth cutting.
Our wide lineup covers a wide variety of applications.

Maximum depth of cut

Utilizing a high raked design + a high rigidity body to achieve low cutting force machining with less chattering

Cutter body designed with both edge sharpness and rigidity, achieves stable machining even on machines with low clamping rigidity. In addition, utilizing insert grades for machining stainless steel and exotic alloys, long tool life can be achieved in machining of stainless steel and inconel etc.

Significantly improved reliability in the machining of exotic alloys

Low cutting force and low chattering design

Achieving low cutting force and low chattering machining with a super high-raked and high rigidity cutter body design.

Superior ease-of-use

Original insert locating mechanism provides high accuracy, ease-of-use and easy corner management.
12mm/16mm insert sizes can use up to 8 corners while 10mm insert size can use up to 4 corners.

VIDEO

Strong cutting edge design coupled with a high rigidity body, for stable and high efficiency milling with low cutting force

Precision inserts with strong cutting edge and low cutting force design

1. Unique curved cutting edge design increases cutting edge strength yet reduces cutting force.
2. High precision cutting edges produces machined surfaces close to finishing quality
3. Smooth cutting even for deep grooves and low rigidity machines.

Highly-durable body

1. Improved corrosion and scratch resistance with a special surface treatment.
2. Improved clamping force and durability by using larger screws.

Coolant holes are standard in the whole series

Improved chip evacuation with air or coolant supply.

 Wide selection of inserts

1. 6 different chipbreakers designs. (L, G, H, E, EH and S type)
2. 9 different grades to cover a wide variety of work materials and applications.

Cutter with tanigentially-mounted, screw-lock inserts developed for high efficiency roughing and finishing of cast iron components

Highly reliable cutter with tanigentially-mounted inserts

Multi-edge design (approximately three tooths per inch)

GFX and GFS for finishing is fitted with easy-to-use cutter runout fine tuning mechanism for adjustment of 5μm or lower runout

Chipbreaker type inserts for low cutting force