Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:31:13 +0000

Heat-insulated frame.
Cut-away frame (behind anvil) for measuring in hard-to-reach places.
A ratchet stop or a friction thimble for a constant measuring force.
Measuring faces: Carbide.

Specifications:

Order No.	Range (mm)	Graduation (mm)	Flatness (µm)
102-301	0 – 25	0.01	0.6
102-302	25 – 50	0.01	0.6
102-311	0 – 25	0.001	0.3
102-313	0 – 25	0.001	0.3
102-312	25 – 50	0.001	0.3
102-303	50 – 75	0.01	0.6
102-304	75 – 100	0.01	0.6

Metric Set

Order No.

Range (mm)

Models included

102-911-40

0 – 100 (Four micrometers per set)

102-301/ 102-302/ 102-303/ 102-304

3 micrometer standards

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:28:25 +0000

More accurate in one-handed operation: inexperienced operators measure significantly more accurately with the new micrometer.
Ratchet function works both from the thimble and the speeder.
Rotating the thimble/speeder when workpiece is between the anvil and spindle causes the ratchet mechanism to operate and apply a constant measuring force to the workpiece.
Clearly aubible ratchet operation for reassurance that measurement is being performed at constant, preset force.

Specifications:

Order No	Range	Accuracy
Metric
102-701	0-25mm	±2µm
102-702	25-50mm	±2µm
102-707	0-25mm	±2µm
102-708	25-50mm	±2µm
Inch
102-717	0-1in	±.0001in
102-718	1-2in	±.0001in

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:26:03 +0000

Baked-enamel-finished frame.
Measuring faces: Carbide.
Equipped with Ratchet Stop for constant measuring force.

103-139-10

103-904-10

Specifications:

Metric
Order No	Range	Accu.	Mass	Remarks
103-129	0-25mm	±2µm	175g	With ratchet stop/0.001mm reading is obtained with vernier.
103-130	25-50mm	±2µm	215g	With ratchet stop
103-137	0-25mm	±2µm	175g	With ratchet stop
103-138	25-50mm	±2µm	215g	With ratchet stop
103-139-10	50-75mm	±2µm	315g	With ratchet stop
103-140-10	75-100mm	±3µm	375g	With ratchet stop
103-141-10	100-125mm	±3µm	515g	With ratchet stop
103-142-10	125-150mm	±3µm	665g	With ratchet stop
103-143-10	150-175mm	±4µm	720g	With ratchet stop
103-144-10	175-200mm	±4µm	920g	With ratchet stop
103-145-10	200-225mm	±4µm	1,080g	With ratchet stop
103-146-10	225-250mm	±5µm	1,255g	With ratchet stop
103-147-10	250-275mm	±5µm	1,405g	With ratchet stop
103-148-10	275-300mm	±5µm	1,565g	With ratchet stop
103-149	300-325mm	±6µm	1,985g	With ratchet stop
103-150	325-350mm	±6µm	2,155g	With ratchet stop
103-151	350-375mm	±6µm	2,305g	With ratchet stop
103-152	375-400mm	±7µm	2,455g	With ratchet stop
103-153	400-425mm	±7µm	2,715g	With ratchet stop
103-154	425-450mm	±7µm	2,965g	With ratchet stop
103-155	450-475mm	±8µm	3,215g	With ratchet stop
103-156	475-500mm	±8µm	3,450g	With ratchet stop
103-913-50	-Click Accessories Button-mm	–	–	–
103-914-50	-Click Accessories Button-mm	–	–	–
103-915-10	-Click Accessories Button-mm	–	–	–
103-927-10	-Click Accessories Button-mm	–	–	–

Inch
Order No	Range	Accr.	Mass	Remarks
103-127	0-1in	±.0001in	175g	With friction thimble
103-128	1-2in	±.0001in	215g	With friction thimble
103-131	0-1in	±.0001in	175g	With ratchet stop
103-132	1-2in	±.0001in	215g	With ratchet stop
103-135	0-1in	±.0001in	175g	With friction thimble
103-136	1-2in	±.0001in	215g	With friction thimble
103-177	0-1in	±.0001in	175g	With ratchet stop
103-178	1-2in	±.0001in	215g	With ratchet stop
103-179	2-3in	±.0001in	315g	With ratchet stop
103-180	3-4in	±.00015in	375g	With ratchet stop
103-181	4-5in	±.00015in	515g	With ratchet stop
103-182	5-6in	±.00015in	665g	With ratchet stop
103-183	6-7in	±.0002in	720g	With ratchet stop
103-184	7-8in	±.0002in	920g	With ratchet stop
103-185	8-9in	±.0002in	1080g	With ratchet stop
103-186	9-10in	±.00025in	1255g	With ratchet stop
103-187	10-11in	±.00025in	1405g	With ratchet stop
103-188	11-12in	±.00025in	1565g	With ratchet stop
103-189	12-13in	±.0003in	1985g	With ratchet stop
103-190	13-14in	±.0003in	2155g	With ratchet stop
103-191	14-15in	±.0003in	2305g	With ratchet stop
103-192	15-16in	±.00035in	2455g	With ratchet stop
103-193	16-17in	±.00035in	2715g	With ratchet stop
103-194	17-18in	±.00035in	2965g	With ratchet stop
103-195	18-19in	±.0004in	3215g	With ratchet stop
103-196	19-20in	±.0004in	3450g	With ratchet stop
103-197	20-21in	±.0004in	4060g	With ratchet stop
103-198	21-22in	±.00045in	4080g	With ratchet stop
103-199	22-23in	±.00045in	4500g	With ratchet stop
103-200	23-24in	±.00045in	4525g	With ratchet stop
103-201	24-25in	±.0005in	4915g	With ratchet stop
103-202	25-26in	±.0005in	4930g	With ratchet stop
103-203	26-27in	±.0005in	5200g	With ratchet stop
103-204	27-28in	±.00055in	5215g	With ratchet stop
103-205	28-29in	±.00055in	5835g	With ratchet stop
103-206	29-30in	±.00055in	5860g	With ratchet stop
103-207	30-31in	±.0006in	6385g	With ratchet stop
103-208	31-32in	±.0006in	6410g	With ratchet stop
103-209	32-33in	±.0006in	6925g	With ratchet stop
103-210	33-34in	±.00065in	6940g	With ratchet stop
103-211	34-35in	±.00065in	7565g	With ratchet stop
103-212	35-36in	±.00065in	7590g	With ratchet stop
103-213	36-37in	±.0007in	8215g	With ratchet stop
103-214	37-38in	±.0007in	8240g	With ratchet stop
103-215	38-39in	±.0007in	8860g	With ratchet stop
103-216	39-40in	±.00075in	8880g	With ratchet stop
103-217	2-3in	±.0001in	315g	With ratchet stop
103-218	3-4in	±.00015in	375g	With ratchet stop
103-219	4-5in	±.00015in	515g	With ratchet stop
103-220	5-6in	±.00015in	665g	With ratchet stop
103-221	6-7in	±.0002in	720g	With ratchet stop
103-222	7-8in	±.0002in	920g	With ratchet stop
103-223	8-9in	±.0002in	1080g	With ratchet stop
103-224	9-10in	±.00025in	1255g	With ratchet stop
103-225	10-11in	±.00025in	1405g	With ratchet stop
103-226	11-12in	±.00025in	1565g	With ratchet stop
103-259	0-1in	±.0001in	175g	With ratchet stop
103-260	0-1in	±.0001in	175g	With ratchet stop
103-262	1-2in	±.0001in	215g	With ratchet stop

Inch Set
Order No	Image
103-904-10
103-905-10
103-906	–
103-907-40	–
103-908-40
103-909
103-922	–
103-929
103-930	–
103-931

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:23:10 +0000

Satin-chrome-finished frame, tapered (on the anvil side) for hard-to-reach places.
Supplied with a setting standard (except for 0-1 in models).
Measuring faces: Carbide.

101-113

101-114

101-117

Specifications:

Inch
Order No	Range	Accuracy	Remarks	Mass
101-113	0-1in	±.0001in	with ratchet stop	180g
101-114	1-2in	±.0001in	with ratchet stop	245g
101-117	0-1in	±.0001in	With friction thimble	180g
101-118	1-2in	±.0001in	With friction thimble	245g
101-119	2-3in	±.0001in	with ratchet stop	410g
101-120	3-4in	±.00015in	with ratchet stop	550g

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:21:00 +0000

Mechanical digit counter with 0.01mm or 0.001 inch resolution for quick and error-free reading.
Equipped with Ratchet Stop for constant measuring force.

Specifications:

Metric
Order No	Range	Accuracy	Remarks
193-101	0-25mm	±2µm	with ratchet stop
193-102	25-50mm	±2µm	with ratchet stop
193-103	50-75mm	±2µm	with ratchet stop
193-104	75-100mm	±3µm	with ratchet stop
193-111	0-25mm	±2µm	with ratchet stop
193-112	25-50mm	±2µm	with ratchet stop
193-113	50-75mm	±2µm	with ratchet stop
193-114	75-100mm	±3µm	with ratchet stop

Inch
Order No	Range	Accu	Remarks
193-201	0-1in	±.0001in	With friction thimble
193-211	0-1in	±.0001in	With friction thimble
193-212	1-2in	±.0001in	with standard,Friction Thimble
193-213	2-3in	±.0001in	with Ratchet Stop
193-214	3-4in	±.00015in	with Ratchet Stop

Metric Set
Order No	Range	Includes
193-901	0-75mm	193-101,193-102,193-103
193-902	0-100mm	193-101,193-102,193-103,193-104

Inch Set
Order No	Range	Includes
193-923	0-3in	193-211,193-212,193-213

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Wed, 10 Mar 2021 06:00:57 +0000

Non-rotating spindle type which accepts seven forms of optional interchangeable anvil/spindle tip (flat, spline, spherical, point, knife-edge, disk, and blade) for a wide range of applications.
Equipped with Ratchet Stop for constant measuring force.
Optional anvils/spindle tips for screw thread measurement (matching V and cone) are also available.

116-101

SPECIFICATIONS:

Metric
Order No.	Range (mm)	Graduation (mm)	Accuracy (µm)
116-101	0 – 25	0.01	±4
116-102	25 – 50	0.01	±4

Metric
Order No.	Range (in)	Graduation (in)	Accuracy (in)
116-105	0 – 1	0.001	±0.0002
116-106	1 – 2	0.001	±0.0002

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:18:31 +0000

Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
Anvil retracting trigger for quick measurement.
Various kinds of indicators are selectable depending on the measurement type.
Anvil stroke: 3 mm

Specifications:

Metric
Order No	Range	Accuracy
107-201	0-25mm	±2µm
107-202	25-50mm	±2µm
107-203	50-75mm	±2µm
107-204	75-100mm	±3µm
107-205	100-125mm	±3µm
107-206	125-150mm	±3µm
107-207	150-175mm	±4µm
107-208	175-200mm	±4µm

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:15:48 +0000

Wide measuring range with interchangeable anvils.
Measuring face of the spindle is carbide tipped.
Equipped with Ratchet Stop for constant measuring force.

104-135A

104-136

104-141A

Specifications:

Metric
Order No	Range	Intechg Anvils	Mass
104-135A	0-150mm	0,25,50,75,100,125mm	1.35kg
104-136A	150-300mm	0,25,50,75,100,125mm	2.65kg
104-139A	0-100mm	0,25,50,75mm	0.79kg
104-140A	100-200mm	0,25,50,75mm	1.38kg
104-141A	200-300mm	0,25,50,75mm	2.22kg
104-142A	300-400mm	0,25,50,75mm	3.31kg
104-143A	400-500mm	0,25,50,75mm	4.81kg
104-144A	500-600mm	0,25,50,75mm	6.35kg
104-145A	600-700mm	0,25,50,75mm	7.72kg
104-146A	700-800mm	0,25,50,75mm	9.08kg
104-147A	800-900mm	0,25,50,75mm	10.41kg
104-148A	900-1000mm	0,25,50,75mm	11.78kg
104-161A	50-150mm	0,25,50,75mm	1.35kg
104-171	0-50mm	0,25mm	0.32kg

Inch
Order No	Range	Interchg Anvils	Mass
104-137	0-6in	0,1,2,3,4,5 in	1.35kg
104-138	6-12in	0,1,2,3,4,5 in	2.65kg
104-150	4-8in	0,1,2,3 in	1.38kg
104-151	8-12in	0,1,2,3 in	2.22kg
104-162	2-6in	0,1,2,3 in	1.35kg
104-165	0-2in	0,1 in	0.32kg
104-201	12-18in	0,1,2,3,4,5 in	4.69kg
104-202	18-24in	0,1,2,3,4,5 in	6.51kg
104-203	24-30in	0,1,2,3,4,5 in	9.95kg
104-204	30-36in	0,1,2,3,4,5 in	11.87kg
104-205	36-42in	0,1,2,3,4,5 in	13.68kg

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:12:58 +0000

Effective for measuring workpiece features where access is dificult.
Measuring faces: Carbide.
Equipped with Ratchet Stop for constant measuring force.

143-101

143-123

Specifications:

Metric
Order No.	Range (mm)	Graduation (mm)	Accuracy (µm)
143-101	0 – 25	0.01	±5
143-102	25 – 50	0.01	±6
143-103	50 – 75	0.01	±7
143-104	75 – 100	0.01	±8
143-105	100 -125	0.01	±9
143-106	125 – 150	0.01	±9
143-107	150 – 175	0.01	±10
143-108	175 – 200	0.01	±10
143-109	200 – 225	0.01	±11
143-110	225 – 250	0.01	±11
143-111	250 – 275	0.01	±12
143-112	275 – 300	0.01	±12

Inch
Order No.	Range (in)	Graduation (in)	Accuracy (in)
143-121	0 – 1	0.001	±0.00025
143-122	1 – 2	0.001	±0.0003
143-123	2 – 3	0.001	±0.00035

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:10:26 +0000

Adjustable measuring range with extension collars.
50 mm/2 in spindle stroke.
Measuring faces: Carbide.
Equipped with Ratchet Stop for constant measuring force.

Specifications:

Metric
Order No	Range	Ext Collars	Mass
105-103	500-600mm	50mm	5.53g
105-104	600-700mm	50mm	6.35g
105-105	700-800mm	50mm	7.17g
105-106	800-900mm	50mm	7.99g
105-107	900-1000mm	50mm	8.81g
105-408	1000-1100mm	50mm	6.37g
105-409	1100-1200mm	50mm	7.08g
105-410	1200-1300mm	50mm	7.79g
105-411	1300-1400mm	50mm	8.5g
105-412	1400-1500mm	50mm	9.21g
105-413	1500-1600mm	50mm	10.17g
105-414	1600-1700mm	50mm	11.13g
105-415	1700-1800mm	50mm	12.09g
105-416	1800-1900mm	50mm	13.05g
105-417	1900-2000mm	50mm	14.01g
105-418	1100-1200mm	50mm,100mm	13.77g
105-419	1200-1400mm	50mm,100mm	15.77g
105-420	1400-1600mm	50mm,100mm	17.91g
105-421	1600-1800mm	50mm,100mm	20.8g
105-422	1800-2000mm	50mm,100mm	22.76g

Inch
Order No	Range	Ext Collars	Mass
105-428	40 �?44 in	1 pc. (2 in)	–
105-429	44 �?48 in	1 pc. (2 in)	–
105-430	48 �?52 in	1 pc. (2 in)	–
105-431	52 �?56 in	1 pc. (2 in)	–
105-432	56 �?60 in	1 pc. (2 in)	–
105-433	60 �?64 in	1 pc. (2 in)	–
105-434	64 �?68 in	1 pc. (2 in)	–
105-435	68 -72 in	1 pc. (2 in)	–
105-436	72 �?76 in	1 pc. (2 in)	–
105-437	76 �?80 in	1 pc. (2 in)	–

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:05:29 +0000

Fixed anvil type to suit 60^o threads.
Directly indicates screw pitch diameter (no need for calculation).
Equipped with Ratchet Stop for constant measuring force.

Specifications:

Metric
Order No	Range	Screw to be measured
125-101	0-25mm	0.4 – 0.5mm/64 – 48TPI
125-102	0-25mm	0.6 – 0.9mm/44 – 28TPI
125-103	0-25mm	1 – 1.75mm/24 – 14TPI
125-104	0-25mm	2 – 3mm/13 – 9TPI
125-105	0-25mm	3.5 – 5mm/8 – 5TPI
125-106	25-50mm	0.4 – 0.5mm/64 – 48TPI
125-107	25-50mm	0.6 – 0.9mm/44 – 28TPI
125-108	25-50mm	1 – 1.75mm/24 – 14TPI
125-109	25-50mm	2 – 3mm/13 – 9TPI
125-110	25-50mm	3.5 – 5mm/8 – 5TPI
125-111	50-75mm	0.6 – 0.9mm/44 – 28TPI
125-112	50-75mm	1 – 1.75mm/24 – 14TPI
125-113	50-75mm	2 – 3mm/13 – 9TPI
125-114	50-75mm	3.5 – 5mm/8 – 5TPI
125-115	50-75mm	5.5 – 7mm/4.5 – 3.5TPI
125-116	75-100mm	0.6 – 0.9mm/44 – 28TPI
125-117	75-100mm	1 – 1.75mm/24 – 14TPI
125-118	75-100mm	2 – 3mm/13 – 9TPI
125-119	75-100mm	3.5 – 5mm/8 – 5TPI
125-120	75-100mm	5.5 – 7mm/4.5 – 3.5TPI

Mechanical Micrometers – Công Ty TNHH Thương Mại Dịch V�?Tinh Hà

Tinh Hà — Tue, 30 Mar 2021 08:03:27 +0000

Anvils and spindle tips are interchangeable in matching pairs to enable measurement of Metric/Unified or Whitworth threads.
Direct reading of screw pitch diameter (no need for calculation).
Equipped with Ratchet Stop for constant measuring force.
Interchangeable anvils/spindle tips are optional.

126-125

126-140

Specifications:

Metric
Order No	Range	Accuracy	Mass
126-125	0-25mm	±4µm	240g
126-126	25-50mm	±4µm	290g
126-127	50-75mm	±4µm	390g
126-128	75-100mm	±5µm	450g
126-129	100-125mm	±5µm	530g
126-130	125-150mm	±5µm	620g
126-131	150-175mm	±6µm	730g
126-132	175-200mm	±6µm	860g
126-133	200-225mm	±6µm	1,030g
126-134	225-250mm	±7µm	1,200g
126-135	250-275mm	±7µm	1,370g
126-136	275-300mm	±7µm	1,540g

Inch
Order Number	Range Inch	Accuracy	Mass	Remarks
126-137	0-1in	±.0002in	240g	–
126-138	1-2in	±.0002in	290g	–
126-139	2-3in	±.0002in	390g	–
126-140	3-4in	±.00025in	450g	with Standard
126-141	4-5in	±.00025in	530g	–
126-142	5-6in	±.00025in	620g	–
126-143	6-7in	±.00025in	730g	–
126-901	0-1in	±.0002in	240g	with Anvil Set (126-800)
126-902	1-2in	±.0002in	290g	with Anvil Set (126-800)
126-903	2-3in	±.0002in	390g	with Anvil Set (126-800)
126-904	3-4in	±.00025in	450g	with Anvil Set (126-800)
126-905	4-5in	±.00025in	530g	with Anvil Set (126-800)
126-906	5-6in	±.00025in	620g	with Anvil Set (126-800)