Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net Thu, 11 Jul 2024 06:47:21 +0000 en-US hourly 1 //wordpress.org/?v=6.6.1 //ixox.net/wp-content/uploads/2021/01/cropped-logo-32x32.png Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net 32 32 Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/vmc-855-vertical-machining-center/ //ixox.net/vmc-855-vertical-machining-center/#respond Tue, 23 Mar 2021 01:42:35 +0000 //ixox.net/?post_type=product&p=8213
  • Manufacturer: MAXMILL
  • Model: VMC-855
    • Mitsubishi M80 controller. Spindle speed 10,000 rpm. Automatic tool changer. Heat exchanger for electric cabinet. Spindle air blast system (M code). Coolant system and tank. Cycle finish indicator and alarm lights. RS-232C interface with cable (10 m).]]>     Outstanding Features:
    • The pyramid machine construction features a perfect structural ratio. The major cast parts are scientifically rib reinforced. This machine construction effectively extends service life and features stable thermal effect and added dampening effect.
    • When installing 3 axes ball screws, ball bar testing and laser equipment are employed for parameter adjustment to achieve the best possible accuracy.
    • All slideways are hardened and precision ground and then coated with high quality, low friction Turcite-B for maximum wear resistance. The mating surfaces are precision treated for long term accuracy.
    • Optimized machine construction. The major machine parts, such as base, column and saddle, etc., are manufactured from high quality alloy cast iron. It features maximum material stability, minimum deformation and lifetime accuracy.

    VMC-855 Vertical Machining Center

    Specification:

    Model Unit VMC-855
    TRAVEL X x Y x Z axis mm 800 x 500 x 520
    Spindle nose to table mm 100~620
    Spindle center to solid column surface mm 550
    TABLE Working area mm 950 x 460
    Max. loading kg 500
    T-Slots (No. x Width x Pitch) mm 4 x 18 x 100
    SPINDLE Tool shank — BBT-40
    Speed rpm 10,000
    Transmission — Direct-Speed Belt Drive
    Bearing lubrication — Grease
    Cooling system — Oil cooled
    Spindle motor max. rating kw(HP) 7.5 (10)
    Spindle motor max.rating (FANUC) kw(HP) 11(15) / 15(20)
    Axis motor max.rating (MITSUBISHI) kw 1.5 / 2.2 / 3.0
    Axis motor max.rating (FANUC) kw 3.0 / 3.0 / 3.0 (STD)
    3.0 / 3.0 / 4.0 (OPT)
    FEED RATES Rapids on X & Y & Z axes m/min 20 / 20 / 20
    Max. cutting federat m/min 10
    TOOL MAGAZINE (ARM) Tool storage capacity pcs 24arm
    Type of tool (optional) type BBT-40
    Max. tool diameter mm 76 arm
    Max. tool weight kg 7
    Max. tool length mm 300 arm
    AVG.CHANGING TIME
    (ARM)    		 Tool to tool sec. 2.7
    Air source required kg/cm2 6 up
    ACCURACY Positioning (VDI 3341) mm P 0.01
    Repeatability (VDI 3341) mm Ps 0.006
    DIMENSION Machine weight (Net) kg 5,400
    Power source required KVA 15
    Floor space (L x W x H) mm 2,508 x 2,745 x 2,720
    Shipment advice —- 1 x 40’HQ (3 sets)
    ]]>     //ixox.net/vmc-855-vertical-machining-center/feed/ 0     Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/vmc-966-vertical-machining-center/ //ixox.net/vmc-966-vertical-machining-center/#respond Tue, 23 Mar 2021 01:34:38 +0000 //ixox.net/?post_type=product&p=8211
  • Manufacturer: MAXMILL
  • Model: VMC-966
    • Mitsubishi M80 controller. Spindle speed 10,000 rpm. Automatic tool changer. Heat exchanger for electric cabinet. Spindle air blast system (M code). Coolant system and tank. Cycle finish indicator and alarm lights. RS-232C interface with cable (10 m).]]>     Outstanding Features:
    • The pyramid machine construction features a perfect structural ratio. The major cast parts are scientifically rib reinforced. This machine construction effectively extends service life and features stable thermal effect and added dampening effect.
    • When installing 3 axes ball screws, ball bar testing and laser equipment are employed for parameter adjustment to achieve the best possible accuracy.
    • All slideways are hardened and precision ground and then coated with high quality, low friction Turcite-B for maximum wear resistance. The mating surfaces are precision treated for long term accuracy.
    • Optimized machine construction. The major machine parts, such as base, column and saddle, etc., are manufactured from high quality alloy cast iron. It features maximum material stability, minimum deformation and lifetime accuracy.

    VMC-966 Vertical Machining Center

    Specification:

    Model Unit VMC-966
    TRAVEL X x Y x Z axis mm 900 x 650 x 600
    Spindle nose to table mm 120~720
    Spindle center to solid column surface mm 701
    TABLE Working area mm 1,100 x 600
    Max. loading kg 1,000
    T-Slots (No. x Width x Pitch) mm 5 x 18 x 100
    SPINDLE Tool shank — BBT-40
    Speed rpm 10,000 rpm
    Transmission — Direct-Speed Belt Drive
    Bearing lubrication — Grease
    Cooling system — Oil cooled
    Spindle motor max. rating kw(HP) 11 (15)
    Spindle motor max.rating (FANUC) kw(HP) 11(15) / 15(20)
    Axis motor max.rating (MITSUBISHI) kw 2.0 / 3.5 / 3.5
    Axis motor max.rating (FANUC) kw 3.0 / 3.0 / 3.0 (STD)
    3.0 / 3.0 / 4.0 (OPT)
    FEED RATES Rapids on X & Y & Z axes m/min 20 / 20 / 20
    Max. cutting federat m/min 10
    TOOL MAGAZINE (ARM) Tool storage capacity pcs 24arm
    Type of tool (optional) type BBT-40
    Max. tool diameter mm 76 arm
    Max. tool weight kg 7
    Max. tool length mm 300 arm
    AVG.CHANGING TIME
    (ARM)    		 Tool to tool sec. 2.7
    Air source required kg/cm2 6 up
    ACCURACY Positioning (VDI 3341) mm P 0.01
    Repeatability (VDI 3341) mm Ps 0.006
    DIMENSION Machine weight (Net) kg 6,700
    Power source required KVA 15
    Floor space (L x W x H) mm 2,795 x 2,875 x 2,700
    Shipment advice —- 1 x 40’HQ (2 sets)
    ]]>     //ixox.net/vmc-966-vertical-machining-center/feed/ 0     Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/nvm-1166-vertical-machining-center/ //ixox.net/nvm-1166-vertical-machining-center/#respond Tue, 23 Mar 2021 01:31:19 +0000 //ixox.net/?post_type=product&p=8210
  • Manufacturer: Maxmill
  • Model: NVM-1166
    • Mitsubishi M80 controller. Spindle speed 10,000 rpm. Automatic tool changer. Heat exchanger for electric cabinet. Spindle air blast system (M code). Coolant system and tank. Cycle finish indicator and alarm lights. RS-232C interface with cable (10 m).]]>     Outstanding Features:
    • The pyramid machine construction features a perfect structural ratio. The major cast parts are scientifically rib reinforced. This machine construction effectively extends service life and features stable thermal effect and added dampening effect.
    • When installing 3 axes ball screws, ball bar testing and laser equipment are employed for parameter adjustment to achieve the best possible accuracy.
    • All slideways are hardened and precision ground and then coated with high quality, low friction Turcite-B for maximum wear resistance. The mating surfaces are precision treated for long term accuracy.
    • Optimized machine construction. The major machine parts, such as base, column and saddle, etc., are manufactured from high quality alloy cast iron. It features maximum material stability, minimum deformation and lifetime accuracy.

    NVM-1166 Vertical Machining Center

    Specification:

    Model Unit NVM-1166
    TRAVEL X x Y x Z axis mm 1,150 x 670 x 600
    Spindle nose to table mm 100~700
    Spindle center to solid column surface mm 720
    TABLE Working area mm 1,300 x 600
    Max. loading kg 1,200
    T-Slots (No. x Width x Pitch) mm 5 x 18 x 100
    SPINDLE Tool shank — BBT-40
    Speed rpm 10,000
    Transmission — Direct-Speed Belt Drive
    Bearing lubrication — Grease
    Cooling system — Oil cooled
    Spindle motor max. rating kw(HP) 11 (15)
    Spindle motor max.rating (FANUC) kw(HP) 11(15) / 15(20)
    Axis motor max.rating (MITSUBISHI) kw 2.0 / 3.5 / 3.5
    Axis motor max.rating (FANUC) kw 3.0 / 3.0 / 3.0 (STD)
    3.0 / 3.0 / 4.0 (OPT)
    FEED RATES Rapids on X & Y & Z axes m/min 20 / 20 / 20
    Max. cutting federat m/min 10
    TOOL MAGAZINE (ARM) Tool storage capacity pcs 24arm
    Type of tool (optional) type BBT-40
    Max. tool diameter mm 76 arm
    Max. tool weight kg 7
    Max. tool length mm 300 arm
    AVG.CHANGING TIME
    (ARM)    		 Tool to tool sec. 2.7
    Air source required kg/cm2 6 up
    ACCURACY Positioning (VDI 3341) mm P 0.01
    Repeatability (VDI 3341) mm Ps 0.006
    DIMENSION Machine weight (Net) kg 7,000
    Power source required KVA 15
    Floor space (L x W x H) mm 3,140 x 3,152 x 2,850
    Shipment advice —- 1 x 40′ HQ (2 sets)
    ]]>     //ixox.net/nvm-1166-vertical-machining-center/feed/ 0     Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/vmc-1490-vertical-machining-center/ //ixox.net/vmc-1490-vertical-machining-center/#respond Tue, 23 Mar 2021 01:27:33 +0000 //ixox.net/?post_type=product&p=8209
  • Manufacturer: MAXMILL
  • Model: VMC-1490
    • Mitsubishi M80 controller. Automatic tool changer. Heat exchanger for electric cabinet. Spindle air blast system (M code). Coolant system and tank. Cycle finish indicator and alarm lights. RS-232C interface with cable (10 m).]]>     Outstanding Features:
    • The pyramid machine construction features a perfect structural ratio. The major cast parts are scientifically rib reinforced. This machine construction effectively extends service life and features stable thermal effect and added dampening effect.
    • 4 square slideways on Y- axis are combined with gibs provided at inner sides for accurate across movement of Y- axis.
    • When installing 3 axes ball screws ball bar testing and laser equipment are employed for parameter adjustment to achieve the best possible accuracy.
    • X,Y,Z axes are rigid box type slidewyas, All slideways are hardened and precision ground and then coated with high quality, low friction Turcite-B for maximum wear resistance. The mating surfaces are precision treated for long term accuracy.
    • Optimized machine construction. The major machine parts, such as base, column and saddle, etc., are manufactured from high quality alloy cast iron. It features maximum material stability, minimum deformation and lifetime accuracy.

    VMC-1490 Vertical Machining Center

    Specification:

    Model VMC-1490
    TRAVEL X x Y x Z axis 1,400 x 900 x 700 mm
    Spindle nose to table 200~900 mm
    Spindle center to solid column surface 990 mm
    TABLE Working area 1,700 x 850 mm
    Max. loading 1,600 kg
    T-Slots (No. x Width x Pitch) 5 x 22 x 150 mm
    SPINDLE Tool shank BT-50
    Speed 6,000 rpm
    Transmission 2-Speed Geared Head
    Bearing lubrication Grease
    Cooling system Oil cooled
    Spindle motor max.rating (MITSUBISHI) 15 kw (20HP)
    Spindle motor max.rating (FANUC) 18.5 kw (25HP)
    Axis motor max.rating (MITSUBISHI) 3.5 / 3.5 / 3.5 kw
    Axis motor max.rating (FANUC) 3.0 / 3.0 / 3.0 kw (STD)
    7.0 / 7.0 / 7.0 kw (OPT)
    FEED RATES Rapids on X & Y & Z axes 15 / 15 / 15 m/min
    Max. cutting federat 12 m/min
    TOOL MAGAZINE Tool storage capacity 24 arm (32 arm otp.)
    Type of tool (optional) BT-50
    Max. tool diameter 110 mm
    Max. tool weight 15 kg
    Max. tool length 300 mm
    AVG.CHANGING TIME
    (ARM)    		 Tool to tool 3.8 sec.
    Chip to chip (50% Z axis) 11 sec.
    Air source required 6 kg / cm2 up
    ACCURACY Positioning P 0.01 mm
    Repeatability Ps 0.006 mm
    DIMENSION Machine weight (Net) 13,800 kg
    Power source required (KVA.) 30
    Floor space (L x W x H) 3,420 x 3,675 x 3,280 mm
    Shipment advice 1 x 20’FR (1 set)
    ]]>     //ixox.net/vmc-1490-vertical-machining-center/feed/ 0     Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/vmc-1890-vertical-machining-center/ //ixox.net/vmc-1890-vertical-machining-center/#respond Tue, 23 Mar 2021 01:24:27 +0000 //ixox.net/?post_type=product&p=8208
  • Manufacturer: Maxmill
  • Model: VMC-1890
    • Mitsubishi M80 controller. Spindle speed 6000 rpm. Automatic tool changer. Heat exchanger for electric cabinet. Spindle air blast system (M code). Coolant system and tank. Cycle finish indicator and alarm lights. RS-232C interface with cable (10 m).]]>     Outstanding Features:
    • The pyramid machine construction features a perfect structural ratio. The major cast parts are acientifically rib reinforced, ensuring high accuracy for various machining applications. This outstanding machine construction effectively extends service life and features stable thermal effect and added dampening effect.
    • 4 square slideways on Y- axis are combined with gibs provided at inner sides for accurate across movement of Y- axis.
    • When installing 3 axes ball screws ball bar testing and laser equipment are employed for parameter adjustment to achieve the best possible accuracy.
    • X,Y,Z axes are rigid box type slidewyas, All slideways are hardened and precision ground and then coated with high quality, low friction Turcite-B for maximum wear resistance. The mating surfaces are precision treated for long term accuracy.
    • Optimized machine construction. The major machine parts, such as base, column and saddle, etc., are manufactured from high quality alloy cast iron. It features maximum material stability, minimum deformation and lifetime accuracy. Square slideways standards.

    VMC-1890 Vertical Machining Center

    Specification:

    Model VMC-1890
    TRAVEL X x Y x Z axis 1,800 x 900 x 700 mm
    Spindle nose to table 250~950 mm
    Spindle center to solid column surface 990 mm
    TABLE Working area 2,100 x 970 mm
    Max. loading 2,500 kg
    T-Slots (No. x Width x Pitch) 5 x 22 x 150 mm
    SPINDLE Tool shank BT-50
    Speed 6,000 rpm
    Transmission 2-Speed Geared Head
    Bearing lubrication Grease
    Cooling system Oil cooled
    Spindle motor max.rating (MITSUBISHI) 18.5 kw (25HP)
    Spindle motor max.rating (FANUC) 18.5 kw (25HP)
    Axis motor max.rating (MITSUBISHI) 4.5 / 7.0 / 4.5 kw
    Axis motor max.rating (FANUC) 3.0 / 3.0 / 3.0 kw (STD)
    7.0 / 7.0 / 7.0 kw (OPT)
    FEED RATES Rapids on X & Y & Z axes 10 / 10 / 10 m/min
    Max. cutting federat 10 m/min
    TOOL MAGAZINE Tool storage capacity 32 arm
    Type of tool (optional) BT-50
    Max. tool diameter 110 mm
    Max. tool weight 15 kg
    Max. tool length 300 mm
    AVG.CHANGING TIME
    (ARM)    		 Tool to tool 3.8 sec.
    Chip to chip (50% Z axis) 11 sec.
    Air source required 6 kg / c?up
    ACCURACY Positioning P 0.01 mm
    Repeatability Ps 0.006 mm
    DIMENSION Machine weight (Net) 19,500 kg
    Power source required (KVA.) 35
    Floor space (L x W x H) 5,360 x 4,170 x 3,500 mm
    Shipment advice 1 x 20’FR (1 set)
    ]]>     //ixox.net/vmc-1890-vertical-machining-center/feed/ 0     Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/qmc-600-vertical-machining-center/ //ixox.net/qmc-600-vertical-machining-center/#respond Tue, 23 Mar 2021 01:18:10 +0000 //ixox.net/?post_type=product&p=8206
  • Manufacturer: Maxmill
  • Model: QMC-600
    • Mitsubishi M80 controller, 10.4" LCD. Automatic tool changer. Heat exchanger for electric cabinet. Spindle air blast system (M code). Coolant system and tank. Cycle finish indicator and alarm lights. RS-232C interface with cable (10 m).]]>     Outstanding Features:
    • Maxmill proudly presents the HQM series vertical machining center, a completely new, well-balanced, high-speed, high production machine ideally suited for mold and metal cutting industries.
    • The machines are built with power and precision for fast cycle times and have a user-friendly FANUC oi-MD High-Performance CNC.
    • All major strutural parts are made of Meehanite cast iron ensuring the utmost rigidity.
    • The machine adopts a box structure for the base and a trapezoid structure in the column for maximum rigidity.
    • High-quality linear guideways are professionally mounted and adjusted to guarantee superior feed accuracy and long service life.
    • Utilizes Maxmill high-speed technology with advanced servomechanisms and a direct drive spindle.
    • Option high speed (12,000/15,000 rpm) and high revolution accuracy, low noise, minimum vibration and low thermal displacement are also outstanding features of this series.
    • Excellent versatility and superb rigidity is offered-all at most competitive prices.

    QMC-600 Vertical Machining Center

    Specification:

    Model QMC-600
    TRAVEL X x Y x Z axis 610 x 410 x 530 mm
    Spindle nose to table 100~630 mm
    Spindle center to solidm column surface 495 mm 
    TABLE Working area 900 x 410 mm
    Max. loading 300 kg
    T-Slots (No. x Width x Pitch) 3 x 18 x 125 mm
    SPINDLE Tool shank (optional) BBT-40
    Speed 12,000 rpm
    Transmission High Speed Direct Drive
    Bearing lubrication Grease
    Cooling system Oil cooled
    Spindle motor max.rating (MITSUBISHI) 7.5kw (10HP)
    Spindle motor max.rating (FANUC) 7.5kw (10HP) / 11kw (15HP)
    Axis motor max.rating (MITSUBISHI) 1.5 / 2.2 / 3.0 kw
    Axis motor max. rating (FANUC) 1.8 / 1.8 / 2.5 kw (STD)
    3.0 / 3.0 / 4.0 kw (OPT)
    FEED RATES Rapids on X & Y & Z axis(linear guideway) 48 / 48 / 48 m/min
    Max. cutting federate 10 m/min
    TOOL MAGAZINE Tool storage capacity 20
    Type of tool (optional) BBT-40
    Max. tool diameter 76 mm (Arm)
    Max. tool weight 5 kg
    Max. tool length 230 mm
    AVG. CHANGING TIME(A) Tool to tool 2.5 sec.
    Chip to chip (50% Z axis) 3.6. sec.
    Air source required 6 kg / c?up
    ACCURACY Positioning P 0.01 mm
    Repeatability Ps 0.006 mm
    DIMENSION Machine weight 4,000
    Power source required (KVA.) 15 KVA
    Floor space (L x W x H) 1,900 x 2,260 x 2,600 mm
    Shipment advice 1 x 40’HQ (4 sets)
    ]]>     //ixox.net/qmc-600-vertical-machining-center/feed/ 0     Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/qmc-850-vertical-machining-center/ //ixox.net/qmc-850-vertical-machining-center/#respond Tue, 23 Mar 2021 01:13:19 +0000 //ixox.net/?post_type=product&p=8205
  • Manufacturer: Maxmill
  • Model: QMC-850
    • Mitsubishi M80 controller, 10.4" LCD. Automatic tool changer. Heat exchanger for electric cabinet. Spindle air blast system (M code). Coolant system and tank. Cycle finish indicator and alarm lights. RS-232C interface with cable (10 m).]]>     Outstanding Features:
    • Linear guideways are professionally mounted and adjusted to guarantee superior feed accuracy and long service life.
    • High-speed technology with advanced servo mechanisms and can add direct drive spindle.
    • Excellent versatility and superb rigidity is offered-all at most competitive prices.
    • The machine adopts a box structure for the base and a trapezoid structure in the column for maximum rigidity.

    QMC-850 Vertical Machining Center

    Specification:

    Model QMC-850
    TRAVEL X x Y x Z axis 850 x 550 x 560 mm
    Spindle nose to table 120~680 mm
    Spindle center to solid column surface 600 mm
    TABLE Working area 950 x 500 mm
    Max. loading 500 kg
    T-Slots (No. x Width x Pitch) 4 x 18 mm x 125 mm
    SPINDLE Tool shank BBT-40
    Speed 10,000 rpm
    Transmission Direct-Speed Belt Drive
    Bearing lubrication Grease
    Cooling system Oil cooled
    Spindle motor max.rating (MITSUBISHI) 7.5kw (10HP)
    Spindle motor max.rating (FANUC) 11kw (15HP) / 15kw (20HP)
    Axis motor max.rating (MITSUBISHI) 1.5 / 2.2 / 3.0 kw
    Axis motor max. rating (FANUC) 3.0 / 3.0 / 3.0 kw (STD)
    3.0 / 3.0 / 4.0 kw (OPT)
    FEED RATES Rapids on X & Y & Z axis(linear way) 36 / 36 / 25 m/min
    Max. cutting federat 10 m/min
    TOOL MAGAZINE Tool storage capacity 24 arm
    Type of tool (optional) BBT-40
    Max. tool diameter 100 mm / 76 mm
    Max. tool weight 7 kg
    Max. tool length 300 mm (arm)
    AVG.CHANGING TIME
    (ARM)    		 Tool to tool 2.7 sec.
    Chip to chip (50% Z axis) 6.7 sec.
    Air source required 6 kg / c?up
    ACCURACY Positioning P0.01 mm
    Repeatability Ps0.006mm
    DIMENSION Machine weight 5,900
    Power source required (KVA.) 15 KVA
    Floor space (L x W x H) 2,700 x 3,000 x 2,870 mm
    Shipment advice 1 x 40’HQ (3 sets)
    ]]>     //ixox.net/qmc-850-vertical-machining-center/feed/ 0     Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/hqm-1480-vertical-machining-center/ //ixox.net/hqm-1480-vertical-machining-center/#respond Tue, 23 Mar 2021 01:03:28 +0000 //ixox.net/?post_type=product&p=8203
  • Manufacturer: Maxmill
  • Model: HQM-1480
    • Mitsubishi M80 controller, 10.4" LCD. Automatic tool changer. Heat exchanger for electric cabinet. Spindle air blast system (M code). Coolant system and tank. Cycle finish indicator and alarm lights. RS-232C interface with cable (10 m).]]>     HQM-1480 Vertical Machining Center

    Specification:

    Model Unit HQM-1480
    TRAVEL X axis mm(inch) 1400(55.2)
    Y axis mm(inch) 800(31.5)
    Z axis mm(inch) 750(29.6)
    Spindle nose to table mm(inch) Std. : 75~825
    (3.0~32.5)(BBT40)
    Opt. : 40~790
    (1.6~31.1) (BBT50)
    Spindle center to solid cloumn surface mm(inch) 863(34.0)
    TABLE Working area mm(inch) 1550 x 700
    (61.1 x 27.6)
    Max. loading kg 1000
    T-slots (No. x Width class=”td-gray1″ x Pitch) mm(inch) 5 x 18 x 125
    (5 x 0.7 x 5.0)
    SPINDLE Tool shank —- Std. : BBT-40 /
    Opt. : BBT-50
    Speed rpm Std. : 10,000 (BBT-40)
    Opt. : 8,000 (BBT-50)
    Transmission —- Belt Drive
    Bearing lubrucation —- Grease
    Cooling system —- Oil cooled
    Spindle motor max.rating (MITSUBISHI) kw(HP) BBT-40:15(20) / BBT-50:18.5(25)
    Spindle motor max.rating (FANUC) kw(HP) BBT-40:15(20) / BBT-50:18.5(25)
    Axis motor max. rating (MITSUBISH) kw 3.5 / 3.5 / 3.5
    Axis motor max. rating (FANUC) kw 3.0 / 3.0 / 3.0 (STD)
    4.0 / 4.0 / 4.0 (OPT)
    FEED RATES Rapids on X & Y & Z axis m/min 30 / 30 / 25
    Max. cutting feedrate m/min 10
    TOOL MAGAZINE Tool storage capacity pcs 24 arm
    Type of tool (optional) type STD: BBT-40
    OPT: BT-50
    Max. tool diameter mm(inch) 76(3.0) arm (BBT-40)
    110(4.3) arm (BBT-50)
    Max. tool weight kg 7 (BBT-40)15 (BBT-50)
    Max. tool length mm(inch) 300(11.8) arm
    AVG. CHANGING TIME (ARM) Tool to tool sec. 2.7
    (BBT-40)     		 3.8
    (BBT-50)
    Air source required kg/cm2 6up
    ACCURACY Positioning (VDI 3341) mm(inch) P 0.01 (0.0004)
    Repeatability (VDI 3341) mm(inch) Ps 0.006 (0.0003)
    DIMENSION Machine weight (Net) kg 11,600
    Power source required KVA 30
    Floor space (L X W X H ) mm(inch) 3,930 x 3,200 x 3,050
    (154.7 x 125.9 x 120)
    Shipment advice —- 1 x 40′ HQ (1 set)
    ]]>     //ixox.net/hqm-1480-vertical-machining-center/feed/ 0     Vertical Machining Center – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/hqm-1260-vertical-machining-center/ //ixox.net/hqm-1260-vertical-machining-center/#respond Tue, 23 Mar 2021 01:00:41 +0000 //ixox.net/?post_type=product&p=8202
  • Manufacturer: MAXMILL
  • Model: HQM-1260
    • Mitsubishi M80 controller, 10.4" LCD. Automatic tool changer. Heat exchanger for electric cabinet. Spindle air blast system (M code). Coolant system and tank. Cycle finish indicator and alarm lights. RS-232C interface with cable (10 m).]]>     HQM-1260 Vertical Machining Center

    Outstanding Features:

    • Linear guideways are professionally mounted and adjusted to guarantee superior feed accuracy and long service life.
    • High-speed technology with advanced servo mechanisms and can add direct drive spindle.
    • Excellent versatility and superb rigidity is offered-all at most competitive prices.
    • The machine adopts a box structure for the base and a trapezoid structure in the column for maximum rigidity.

    Trung tâm gia công đứng Maxmill HQM-1260

    Specification:

    Model HQM-1260
    TRAVEL X x Y x Z axis 1,200 x 650 x 630 mm
    Spindle nose to table 100~730 mm
    Spindle center to solid column surface 700 mm
    TABLE Working area 1,350 x 600 mm
    Max. loading 880 kg
    T-Slots (No. x Width x Pitch) 4 x 18 mm x 130 mm
    SPINDLE Tool shank BBT-40
    Speed 10,000 rpm
    Transmission Direct-Speed Belt Drive
    Bearing lubrication Grease
    Cooling system Oil cooled
    Spindle motor max.rating (MITSUBISHI) 11kw (15HP)
    Spindle motor max.rating (FANUC) 11kw (15HP) / 15kw (20HP)
    Axis motor max.rating (MITSUBISHI) 2.0 / 3.5 / 3.5 kw
    Axis motor max. rating (FANUC) 3.0 / 3.0 / 3.0 kw (STD)
    3.0 / 3.0 / 4.0 kw (OPT)
    FEED RATES Rapies on X & Y & Z axis(linear way) 40 / 40 / 30 m/min
    Max. cutting federat 15 m/min
    TOOL MAGAZINE Tool storage capacity 24 arm
    Type of tool (optional) BBT-40
    Max. tool diameter 76 mm
    Max. tool weight 7 kg
    Max. tool length 300 mm
    AVG.CHANGING TIME
    (ARM)    		 Tool to tool 2.7 sec.
    Chip to chip (50% Z axis) 6.7 sec.
    Air source required 6 kg / c?up
    ACCURACY Positioning P 0.01 mm
    Repeatability Ps 0.006 mm
    DIMENSION Machine weight 7,700
    Power source required (KVA.) 20 KVA
    Floor space (L x W x H) 3,640 x 3,100 x 2,850 mm
    Shipment advice 1 x 40’HQ (1 sets)
    ]]>     //ixox.net/hqm-1260-vertical-machining-center/feed/ 0