Double Column Machining Centers – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net Thu, 11 Jul 2024 07:28:34 +0000 en-US hourly 1 //wordpress.org/?v=5.7.12 //ixox.net/wp-content/uploads/2021/01/cropped-logo-32x32.png Double Column Machining Centers – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net 32 32 Double Column Machining Centers – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/double-column-machining-centers-mcr-mcv-series/ //ixox.net/double-column-machining-centers-mcr-mcv-series/#respond Sat, 27 Mar 2021 01:44:42 +0000 //ixox.net/?post_type=product&p=8499
  • Manufacturer: OKUMA
  • Model: MCR-C, MCR-B? MCR-A5C? MCR-H, MCR-AF, MCV-A?/li> Solid performance achieved by advanced structural designs. Double column structure handles heavy-duty cutting. Elevating crossrail guideway. Automation for highly productive and flexible performance.]]> Trung tâm gia công cột đôi OKUMA MCR/MCV Series

    Solid performance achieved by advanced structural designs

    Double column structure handles heavy-duty cutting

    Double-column construction with square columns maintains good rigidity with respect to vertical loads, horizontal loads, and torsion for heavy-duty cutting with high accuracy.

    Elevating crossrail guideway

    The elevating crossrail has sufficient length and a structure for accuracy and long life with no “snaking” movement.
    Cấu trúc cột đôi Ray ngang dẫn hướng có đ?chính xác và tuổi th?cao

    Spindlehead provides both high speed and high accuracy (ram saddle guideway)

    The spindlehead guide has a wide, highly rigid rectangular cross section, and is supported by a deadweight balancer via rollers on the crossrail. This gives high speed, high accuracy movements and high quality machined surfaces.

    Smooth, accurate positioning
    Table guideway has roller guide system

    The weight of the table and workpiece is supported with roller bearings on hardened and ground surfaces. Movement is not affected by weight changes from heavy workpiece loads, enabling light, smooth movements and accurate positioning.
    Layout includes the drive system (ball screw) in the table center with a narrow width between the center guides, to achieve outstanding linear motion straightness and long-term stability.
    Đầu trục chính (b?mặt ray trượt) thực hiện gia công tốc đ?cao và đ?chính xác cao cùng một lúc Định v?trơn tru, chính xác bàn máy nh?h?thống dẫn hướng con lăn

    Automation for highly productive and flexible performance

    Full array of heads

    All types of cutting in all types of shapes can be machined by changing the wide array of heads.
    Many different processes can be performed in auto operation with the auto tool changer (ATC) and auto head changer (AAC).

    Trung tâm gia công cột đôi OKUMA MCR/MCV Series

    Fast NC-ATC

    One arm performs the changes for both the horizontal and vertical spindles. The next tool to be used, regardless of the spindle location, is brought to the standby position during cutting. This simultaneous operation greatly reduces tool-to-tool time.
    ATC is available for 30°angular heads and universal index heads (B/C axis) in addition to extension heads and 90° angular heads.

    Extension head tool change 90º angular head tool change Universal index head tool change
    Extension head tool change 90º angular head tool change Universal index head tool change

    Model lineup

    Double-column machining center [5-sided applications]

    High rigidity, high output High function, high accuracy
    Trung tâm gia công cột đôi OKUMA MCR C Trung tâm gia công cột đôi OKUMA MCR BIII
    Max axis travels (X-Y-Z)：X12,200・Y4,200・Z1,050mm Max axis travels (X-Y-Z)：X12,000・Y4,200・Z800mm
    Space-saving, cost performance Linear motor drive, high speed
    Trung tâm gia công cột đôi OKUMA MCR A5CII Trung tâm gia công cột đôi OKUMA MCR H
    Max axis travels (X-Y-Z)：X12,200・Y4,100・Z800mm Max axis travels (X-Y-Z)：X5,000・Y3,700・Z800mm

    Double-column machining centers (top surface machining)

    Space-saving, high speed Quill type
    Trung tâm gia công cột đôi OKUMA MCR AF Trung tâm gia công cột đôi OKUMA MCV AII
    Max axis travels (X-Y-Z)：X2,600・Y2,000・Z800mm Max axis travels (X-Y-Z)：X5,200・Y2,000・Z450mm

    Video:

    Video model MCR-H:

    Machine Specifications:

    MCR-C/MCR-B?MCR-A5C?/strong>

    MCR-C MCR-B?sup>*9 MCR-A5C?/span>
    Travel X-axis travel (table front/back) mm 4,200 to 12,200 3,000 to 12,000 3,200 to 12,200
    Y-axis travel (spindle horizontal) mm 3,200 to 4,200 2,700 to 4,200 2,600 to 4,100
    Z-axis travel (ram vertical) mm 1,050?,250?/span> 800?,000?/span> 800
    W-axis travel (crossrail vertical) mm 1,000, 1,200 700 to 1,300 800 to 1,200
    Effective width between columns mm 2,650 to 3,650 2,050 to 3,550 2,150 to 3,650
    Table to spindle nose (max) mm 1,650 to 1,850
    ?,550 to 1,750?sup> *1    		 1,350 to 1,850
    ?,250 to 1,750?sup> *1    		 1,450 to 1,850
    ?,350 to 1,750］?sup>*1
    Table Working surface mm 2,000×4,000 to 3,000×12,000 1,500×2,800 to 3,000×11,800 1,500×3,000 to 3,000×12,000
    Maximum load kg 22,000 to 66,000 12,000 to 72,600 12,000 to 66,000
    T-slots
    [Width x No. (spacing)]    		 mm 24H7×11, 13, 15
    (Center 200)    		 24H7×9 to 15
    (Center 200)    		 24H7×11, 13, 15
    (Center 140, 200)
    Height from the floor mm 850 to 950 800 to 950 850 to 950
    Feedrates Rapid traverse m/min X・Y?4, Z?5
    （X・Y?4*2, Z?5?sup>*3
    （X?0, Y?4*2, Z?5?sup>*4    		 X?5, Y?0*10, Z?5 X?0, Y?2, Z?0
    （X?0, Y?2*2, Z?0?sup>*20
    （X?0, Y?2*2, Z?0?sup>*21
    （X?0, Y?0*2, Z?0?sup>*22
    （X?0, Y?0*2, Z?0?sup>*23
    Cutting feedrate mm/min 1 to 10,000 1 to 10,000 1 to 10,000
    W-axis (crossrail vertical) mm/min 3,000 3,000 3,000
    ATC Tool shank MAS BT50 MAS BT50 MAS BT50
    Pull stud MAS 2 MAS 2 MAS 2
    Tool magazine capacity tools 50
    ?0, 100, 120, 180?/span>    		 32*11
    ?0, 72, 100, 120, 180?/span>    		 50
    ?0, 100, 120, 180?/span>
    Max tool diameter mm W/ adjacent tools：?35
    W/o adjacent tools：?64    		 W/ adjacent tools：?35
    W/o adjacent tools：?30    		 W/ adjacent tools：?35
    W/o adjacent tools：?30
    Max tool length mm 600 400 400
    Max tool weight kg 25 25 25
    Tool selection Fixed address Fixed address Fixed address
    Spindle Spindle speed min-1 4,000?,000?/span> 4,000?,600, 6,000, 8,000, 10,000?/span> 4,000?,000, 10,000?/span>
    Taper bore 7/24 Taper No.50 7/24 Taper No.50 7/24 Taper No.50
    Bearing diameter mm ø100［?5*5, ø130*6, ø100*7?/span> ø100［?5*12?/span> ø100［?5*24?/span>
    Motors Spindle drive kW 45/37?0 min/cont?/span>
    ?7（cont）］*5    		 30/22?0 min/cont?sup>*8
    ?5/37?0 min/cont?sup>*13, 22（cont?sup>*5,
    26/22?0 min/cont?sup>*14?/span>    		 26/22?0 min/cont?sup>*8
    ?6/22?0 min/cont?sup>*24,
    30/22?0 min/cont?sup>*25?/span>
    Feed drives kW X?4.0, Y?.4, Z?.2×2 X?.4?4*15? Y?.3, Z?.6×2
    （X?.4?4*16? Y?.4, Z?.6×2?sup>*17    		 X?.4?4*26? Y?.3, Z?.2×2?/span>
    Crossrail traverse kW W?.6?.2*18）? W?.6?.2*18）? W?.6×2
    Power Requirements Electrical power supply kVA 60*8 60*8 60*8
    Compressed air flow rate L/min(ANR) 650（over 0.5 MPa?sup>*8 650（over 0.5 MPa?sup>*8 650（over 0.5 MPa?sup>*8
    Machine Size Height mm 6,730, 6,980 6,250 to 6,850 5,820 to 6,300
    Floor space (machine only) mm 7,810×10,730 to 8,835×27,930 6,950×8,200 to 8,700×27,400 6,180×8,430 to 7,780×27,930
    Weight (machine only) kg 48,000 to 116,000 36,000 to 120,900 32,000 to 101,000
    CNC OSP-P300MA OSP-P300MA OSP-P300MA

    ［　］：Optional

    MCR-H/MCR-AF/MCV-A?/span>

    MCR-H MCR-AF MCV-A?/span>
    Trave X-axis travel (table front/back) mm 4,200, 5,200 2,600 2,000 to 5,200
    Y-axis travel (spindle horizontal) mm 3,200, 3,700 1,500, 2,000 1,600, 2,000
    Z-axis travel (ram vertical) mm 800?,000?/span> 800 450 (Quill vertical)
    W-axis travel (crossrail vertical) mm 1,000 – 1,000, 1,150
    Effective width between columns mm 2,550, 3,050 2,600 1,650, 2,050
    Table to spindle nose (max) mm 1,550 1,100
    ?,000*29?/span>    		 1,360 to 1,510
    ?,380 to 1,530?sup>*36
    Table Working surface mm 2,000×4,000, 2,500×5,000 2,000×1,500, 2,000×2,000 1,200×1,800 to 1,500×5,000
    Maximum load kg 22,000, 33,000 10,000 6,000 to 16,000
    T-slots
    [Width x No. (spacing)]    		 mm 24H7×11, 13
    (Center 200)    		 20H7×9, 11
    (Center 200)    		 20H7×9, 11
    (Center 140)
    Height from the floor mm 920 850 700 to 750
    Feedrates Rapid traverse m/min X・Y?0, Z?5 X・Y?0, Z?0 X・Y?0, Z?0
    Cutting feedrate mm/min X・Y? to 30,000, Z? to 15,000 1 to 10,000 1 to 10,000
    W-axis (crossrail vertical) mm/min 5,000 – 420/500?0/60Hz?sup>*37
    ATC Tool shank MAS BT50 MAS BT50［MAS BT50*29, MAS BT40*30, HSK-A63*31*32?/span> MAS BT50
    Pull stud MAS 2 MAS 2*33 MAS 2
    Tool magazine capacity tools 50
    ?0, 100, 120, 180?/span>    		 24
    ?2*30*31*32, 48*30*31*32, 50*34, 72*34, 100*34?/span>    		 24
    ?0, 72, 100?/span>
    Max tool diameter mm W/ adjacent tools：?35
    W/o adjacent tools：?30    		 W/ adjacent tools：?25*34［?35*35, ø90*30*31*32?/span>
    W/o adjacent tools：?30*34［?25*30*31*32?/span>    		 W/ adjacent tools：?28
    W/o adjacent tools：?30
    Max tool length mm 400 400 400
    Max tool weight kg 25 25*34?*30*31*32?/span> 20
    Tool selection Fixed address Fixed address*34
    ［random memory*30*31*32?/span>    		 Fixed address
    Spindle Spindle speed min-1 8,000 8,000?2,000, 15,000, 20,000, 25,000?/span> 4,000?,000, 10,000?/span>
    Taper bore 7/24 Taper No.50 7/24 Taper No.50
    ?/24 Taper No.50*29, 7/24 Taper No.40*30, HSK-A63*31*32?/span>    		 7/24 Taper No.50
    Bearing diameter mm ø85 ø85［?00*29, ø70*30*31,
    ø60*32?/span>    		 ø100［?5*24?/span>
    Motors Spindle drive kW 26/22?0 min/cont?/span> 26/22?0 min/cont?sup>*8
    ?7/26?0 min/cont?sup>*29, 26/18.5?0 min/cont?sup>*30,
    30/22?0 min/cont?sup>*31, 15/11?0 min/cont?sup>*32?/span>    		 22/18.5?0 min/cont?/span>
    ?2/15?0 min/cont?sup>*5, 22（cont?sup>*42?/span>
    Feed drives kW X?2*27*28?8*27*43? Y?*27, Z?.6×2 X・Y?.2, Z?.6×2 X?.5?.2*38, 4.6*39）Y:4.2, Z:4.2
    Crossrail traverse kW W?.2×2 – 3.7（AC）［3.6*40?/span>
    Power Requirements Electrical power supply kVA 80*8 55*8 40*8 45*8
    Compressed air flow rate L/min(ANR) 950（over 0.5 MPa?sup>*8 700（over 0.5 MPa?sup>*8 500（over 0.5 MPa?sup>*8
    Machine Size Height mm 6,450 4,670?,450*29?/span> 4,375 to 4,585*41
    Floor space (machine only) mm 7,825×10,730, 8,425×12,830 5,560×4,200, 5,560×5,230 4,935×6,000 to 5,335×12,920
    Weight (machine only) kg 64,000, 75,000 24,500, 26,000 19,500 to 30,500
    CNC OSP-P300MA OSP-P300MA OSP-P300MA

    ［　］：Optional　*1. Asterisk *1 marked square brackets indicate with 250-mm extension head. *2. Deceleration near both ends of Y-axis travel *3. ( ): 30 × 50, 30 × 65, 35 × 50, 35 × 65 machine nominal sizes *4. ( ): 30 × 80, 30 × 100, 35 × 80, 35 × 100, 35 × 120 machine nominal sizes *5. 6,000 min-1 specs *6. 4,000 min-1, high output specs *7. 6,000 min-1, high output specs *8. Standard specs *9. Elevating crossrail *10. Deceleration near both ends of Y-axis travel with 30 and 35 size machines *11. With 32-tool ATC there are limitations to ATC range with 25 and larger size machines *12. 6,000, 8,000, 10,000 min-1 specs *13. 3,600 min-1 specs *14. 8,000, 10,000 min-1 specs *15. 30 × 120 size machine *16. 35 × 120 size machine *17. ( ): 35 size machine *18. 35 size machine *20. ( ): 30 × 50, 30 × 65 size machines *21. ( ): 30 × 80, 30 × 100 size machines *22. ( ): 35 × 50, 35 × 65 size machines *23. ( ): 35 × 80, 35 × 100, 35 × 120 size machines *24. 6,000, 10,000 min-1 specs *25. 10,000 min-1 aluminum machining specs *26. 25 × 50, 25 × 65, 30, 35 size machines *27. Linear motor *28. 25 × 40 size machine *29. 12,000 min-1 specs *30. 15,000 min-1 specs *31. 20,000 min-1 specs *32. 25,000 min-1 specs *33. No pull stud with HSK specs *34. 8,000, 12,000 min-1 specs *35. 8,000 or 12,000 min-1 specs and 50-tool magazine capacity *36. [ ]: 10,000 min-1 specs *37. Auto-positioning crossrail; 400 mm/min for 16, 340 mm/min for 20 size machines *38. 20 × 40 size machine *39. 20 × 50 size machine *40. Auto-positioning crossrail *41. Standard pendant (fixed) and no thru-spindle *42. 10,000min-1 specs *43. 30 × 50 size machine

    ]]>     //ixox.net/double-column-machining-centers-mcr-mcv-series/feed/ 0 Double Column Machining Centers – Công Ty TNHH Thương Mại Dịch V?Tinh Hà //ixox.net/bmc-5f-6224-5-face-machining-center/ //ixox.net/bmc-5f-6224-5-face-machining-center/#respond Mon, 22 Mar 2021 09:01:36 +0000 //ixox.net/?post_type=product&p=8181
  • Manufacturer: MAXMILL
  • Model: BMC-5F-6224
    • Fanuc 31i-MB controller. Spindle 6000rpm (Gear). Automatic lubricating system. Automatic lubricating oil collector for 3 axes. RS-232 interface / RJ45. Coolant system and tank.]]>     Outstanding Features:
    • Precision gear-type clutch. Indexing accuracy ±3 seconds, repeatability 1 second.
    • 3,500rpm spindle with horizontal head provides high cutting efficiency.
    • The precision gear-type clutch of 280mm large external diameter features high rigidity. Such design provides stable angular position and deformation-free operation for heavy cutting task.
    • The internal rotation face of the horizontal head is coated with PTFE material. Such design requires less rotation torque and extends sliding face lifetime.
    • The horizontal head is equipped with large-sized clamping jaws. Larger contact faces feature well-dispensed stress and high parts stability.
    • Obvious grease inlet can also be used as oil window for maintenance.
    • Built-in oil and cutting coolant circuits enhance connection efficiency and features neat design in appearance.
    • The horizontal spindle head incorporates tool clamping mechanism as one-piece structure, which saves space and time.
    • A level surface at the exterior of the horizontal head is parallel to the spindle. This is a handy design for calibrations and accuracy inspection.

    Trung tâm gia công 5 mặt BMC-5F-6224

    Specification:

    Model BMC-5F-6224
    Travel X-axis travel 6200 mm
    Y-axis travel 2400 mm
    Z-axis travel 1100 mm
    Spindle nose to table(Horizontal) 160~1202 mm
    Spindle nose to table(Vertical) 500~1,600 mm
    Distance between spindle center to bridge 475 mm
    Distance between columns 2400 mm
    Table Working area 6200×2100 mm
    Max. loading 22000 kgs
    T-Slots (No.x Width x Pitch 10x22x200 mm
    Spindle Spindle speed 50~6000 rpm
    Spindle motor max. rating 26 kw
    Axis motor max. rating 9/7/7 kw
    Taper size BT-50
    Feed Rates Rapide on X/Y/Z-axis 12/12/12 m/min
    Max. cutting feedrate 6 m/min
    Tool Magazine Number of tool 60 (OPT. 80/100/120)
    Type of tool BT – 50
    Max. tool diameter 125/250 mm
    Max. tool weight 25 kgs
    Max. tool length 400 mm
    Tool change speed (ATC only) 12 sec
    Tool chain divisional time 0.4 sec/pot
    Accuracy Positioning P0.05 mm
    Repeatability Ps0.035 mm
    DIMENSION Air source required 6 kg/cm2
    Machine weight(Net/Gross) 51500/53500 kgs
    Power source required 50 KVA
    Floor space(LxWxH) 14470x6765x5510 mm
    ]]>     //ixox.net/bmc-5f-6224-5-face-machining-center/feed/ 0