Rigid spindle for fast, heavy-duty turning

• 3-point bearing support for steady, powerful cutting (double-row cylindrical roller bearings plus highspeed duplex angular contact ball bearings)
• Housing cooled for minimal thermal deformation
• Unique labyrinth construction keeps coolant from penetrating spindle bearings

Higher production efficiency with fast machine movement

Multitasking V12 turret gives rise to highly efficient machining

L (lathe) and M (milling) tools can be mounted in all stations

LB35Ⅲ (M), LB45Ⅲ (M) VDI specs Quick change tooling system used	LB45Ⅲ (MY) radial tooling specs Powerful milling with high power, high torque motor
Faster machine movement reduces non-cutting time Fast turret rotation of 0.3 sec/1 index (LB35Ⅲ) Rotation speed is also unaffected by unbalanced tooling * LB45Ⅲ is 0.7 sec/1 index Further reduction in non-cutting time with high-speed rapid traverse of X axis: 15 m/min, Z axis: 20 m/min Uses backlash-free, direct drive mechanism on X axis	Powerful clamping to match heavy-duty turning Big coupling [LB35Ⅲ : ø354 (ø13.94), LB45Ⅲ : ø460 (ø18.11)] for powerful hydraulic clamping on turret Large turret but minimal interference [LB35Ⅲ : 570 mm (22.44 in.), LB45Ⅲ : 700 mm (27.56 in.)] across flats NC turret with servo motor drive

Achieves steady machining with high dimensional stability

Machining dimensional change over time of ø17 μm (LB35Ⅲ actual data)

In addition to maintaining high dimensional accuracy when room temperature changes, Okuma’s Thermo-Friendly Concept provides high dimensional accuracy during machine startup and machining restart. To stabilize thermal deformation, warming-up time is shortened and the burden of dimensional correction during machining restart is reduced.

»

Wide-range of variations

Process-intensive machining with the Y axis
1-chuck machining even with complexshaped workpieces (LB45Ⅲ MY specs)

• A wide range of milling based on highly precise, wide-ranging Y axis travel with a double slide system
• Achieves process-intensive machining with 1-chucking.

The best tailstock with built-in center for machining shafts

• Highly-rigid built-in center (standard);
  Quill diameter LB35Ⅲ : ø120 mm, LB45Ⅲ : ø130 mm
  Built-in tailstock MT. No. 5

» Download Catalog: